Introduction
Thank you for choosing the DSP® Bald Head Shaver. This electric cordless rechargeable shaver is designed for a close and thorough shave, suitable for bald heads, beards, and body hair. Its waterproof design allows for both wet and dry shaving, and it features a long-lasting battery for convenient use. Please read this manual carefully before using the product to ensure safe and optimal performance.
Safety Information
For safe and optimal use, please observe the following precautions:
- Do not use the shaver while it is charging.
- Exercise caution when using the shaver near water, despite its waterproof design, to prevent electrical hazards.
- For a better shaving experience and to minimize the risk of cuts or skin irritation, it is recommended to use shaving foam.
- Do not push the head shaver razor or press hard against the skin. Allow the shaver to glide gently for effective hair removal.
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
Product Overview
The DSP® Bald Head Shaver features a floating double net cutter head designed to conform to facial contours, capturing more hair for a close and thorough shave. It is engineered to trim even the shortest hairs from various angles, ensuring a complete shave.
Image: The DSP® Bald Head Shaver, showcasing its sleek black and silver design, along with its double foil shaving head, protective cap, and USB charging cable.
Image: A detailed view of the shaver's floating double net cutter head, highlighting its design for efficient and close shaving.
Key Features:
- Floating Double Net Cutter Head: Adapts to facial contours for a close and thorough shave.
- Versatile Shaving: Effectively captures short hairs from various angles, ideal for bald heads, beards, and body hair.
- Long Battery Life: Provides over 60 minutes of usage on a full charge, suitable for daily use and travel.
- Easy to Clean: Designed for simple cleaning by sliding a button to access the beard compartment, allowing for brush or water cleaning.
- Waterproof Design: Allows for convenient wet or dry shaving.
- Portable: Compact dimensions (4.9 x 2 x 1.18 inches; 7.04 ounces) make it easy to carry for travel, home, or office use.
Specifications
| Product Dimensions | 4.9 x 2 x 1.18 inches |
| Item Weight | 7.04 ounces |
| Model Number | 60102-1 |
| Batteries | 1 AA battery required (included) |
| Manufacturer | DSP |
| Power Source | Battery Powered |
| Special Features | Detachable Head, Dry Shave, Lighted, Portable, Waterproof |
| Recommended Uses | Bald Head |
Image: The shaver's compact size, indicating its portability for travel, home, and office use.
Setup
Before first use, ensure your DSP® Bald Head Shaver is fully charged. The shaver comes with an included AA battery. Connect the shaver to a power source using the provided USB charging cable.
Initial Charge:
- Unpack the shaver and all accessories.
- Insert the included AA battery if not already installed.
- Connect the USB charging cable to the shaver's charging port.
- Plug the other end of the USB cable into a compatible USB power source (e.g., PC, power bank, vehicle USB port, or USB wall adapter).
- Allow the shaver to charge until the indicator light signals a full charge. A full charge typically takes approximately 1 hour and provides over 60 minutes of usage time.
Image: The shaver being charged via a Type-C USB connection, illustrating its fast charging capability and compatibility with various USB power sources.
Operating Instructions
Powering On/Off:
- To turn on the shaver, press the power button located on the front.
- When in use, the indicator light will emit a blue light.
- To turn off the shaver, press the power button again.
Image: The shaver in operation, with a blue indicator light visible, signifying active use.
Shaving Techniques:
The DSP® Bald Head Shaver supports both dry and wet shaving, offering flexibility for your grooming routine.
- Dry Shaving: For a quick shave, use the shaver on dry skin.
- Wet Shaving: For a smoother, more comfortable shave, especially for sensitive skin, apply shaving foam or gel to your skin before shaving. The shaver's waterproof design allows for safe use with water.
When shaving, gently glide the shaver over the skin. Do not press hard or apply excessive pressure, as this can cause irritation or reduce the shaver's effectiveness. The floating double net cutter head is designed to adapt to your contours with light pressure.
Image: A visual comparison demonstrating the shaver's capability for both dry shaving on a beard and wet shaving with foam.
Versatile Use:
This shaver is versatile and can be used for various grooming needs:
- Bald Trimmer: Achieve a smooth, clean-shaven head.
- Beard Shaver: Maintain a clean-shaven face or trim beard lines.
- Thorough Trimming: Suitable for body hair trimming.
Image: Demonstrates the shaver's versatility for shaving a bald head, trimming a beard, and general body hair removal.
Charging
The DSP® Bald Head Shaver is equipped with a long-lasting battery. When the battery is low, the indicator light will turn red and flash, signaling that a charge is needed.
- Connect the shaver to a USB power source using the provided cable.
- A full charge takes approximately 1 hour.
- Once fully charged, the shaver provides over 60 minutes of continuous usage.
Image: The shaver connected to a power source, with a red flashing indicator light indicating that it is charging due to low battery.
Cleaning and Maintenance
Regular cleaning ensures optimal performance and extends the life of your shaver. The DSP® Bald Head Shaver is designed for easy cleaning.
- Remove Shaving Head Cover: Gently peel off the shaving head cover to expose the blades.
- Clean with Brush: Use the provided cleaning brush to remove hair clippings from the blades and inside the shaver head.
- Rinse with Water: For a more thorough clean, rinse the shaving head and the internal compartment under running tap water. The shaver is waterproof (IPX4 rated), allowing for safe rinsing.
- Dry: Allow all parts to air dry completely before reassembling the shaver.
Image: A step-by-step guide illustrating how to clean the shaver: removing the head cover, brushing off hair, rinsing under water, and rinsing the cap.
For best results, clean the shaver after each use.
Troubleshooting
If you encounter issues with your DSP® Bald Head Shaver, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Shaver does not turn on. | Battery is depleted. | Charge the shaver fully. Ensure the charging cable is securely connected to both the shaver and the power source. |
| Poor shaving performance / pulling hair. | Blades are dull or clogged with hair. | Clean the shaving head thoroughly. If performance does not improve, consider replacing the shaving head. |
| Skin irritation after shaving. | Applying too much pressure or dry shaving on sensitive skin. | Use less pressure when shaving. Try wet shaving with shaving foam or gel. Ensure skin is clean before shaving. |
| Shaver stops working during use. | Battery is low or shaver is overheated. | Recharge the shaver. If it feels hot, turn it off and let it cool down before resuming use. |
Warranty and Support
The DSP® Bald Head Shaver comes with a 12-month warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
Image: A customer service representative, symbolizing the 12-month after-sale service and support provided for the product.
For technical support, warranty claims, or any questions regarding your shaver, please contact DSP customer service through the retailer's platform or the official DSP website. Provide your model number (60102-1) and a detailed description of the issue for faster assistance.
You can visit the official DSP Store on Amazon for more information and support: DSP Store
