1. Introduction
This manual provides detailed instructions for the safe and effective use of your TXQ SABER SN Pixel V4.0 Light Saber. Please read this manual thoroughly before operating the device and retain it for future reference. This light saber features advanced SN Pixel V4.0 technology, offering 27 sound fonts, 12 changeable colors, and smooth swing effects for an immersive experience.
Image 1.1: The TXQ SABER SN Pixel V4.0 Light Saber with an illuminated red blade.
2. Package Contents
Verify that all items listed below are included in your package:
- Handle (Hilt) x 1
- Blade x 1 (82cm Spotlight PC)
- Tool Kit x 1
- Charging Cord x 1
- Instruction Manual x 1
3. Specifications
| Feature | Detail |
|---|---|
| Hilt Material | Aluminum Alloy 6063 |
| Blade Material | Spotlight PC |
| Speaker | 8Ω 2W |
| Battery | 3200mAh |
| Blade Size | 82cm (92cm also supported) |
| Operating Time | Approximately 4 hours |
| Charging Time | Approximately 2 hours |
| Sound Fonts | 27 Sets |
| Blade Colors | 12 kinds (Red, Blue, Yellow, Cyan, Ice blue, Green, Pink, Orange, Purple, Peak-green, Roseo, White) |
| Blade Effects | 3 kinds (Stable, Blaster, Pulse) |
| Item Weight | 3.3 pounds |
| Recommended Age | 12 months - 10 years |
4. Safety Information
- Do not expose the light saber to extreme temperatures or direct sunlight for extended periods.
- Avoid striking hard surfaces or other objects with the blade, as this may cause damage.
- Keep the device away from water and other liquids.
- Use only the provided charging cord and a 5V 1A charging head. Using incompatible chargers may damage the battery or device.
- Ensure the blade is securely attached before use.
- This product contains small parts and is not suitable for children under 3 years old without adult supervision.
5. Setup
5.1 Blade Installation
- Carefully insert the blade into the hilt opening.
- Align the blade with the retention screws on the hilt.
- Using the provided tool kit, tighten the retention screws to secure the blade firmly in place. Do not overtighten.
Image 5.1: Close-up view of the hilt's emitter, showing where the blade connects.
5.2 Initial Charge
It is recommended to fully charge the light saber before its first use. Refer to Section 7 for detailed charging instructions.
6. Operating Instructions
6.1 Power On/Off
- To Power On: Press and hold the main button on the hilt. The button light will illuminate, and the blade will activate.
- To Power Off: Press and hold the main button again. The blade will deactivate, and the button light will turn off.
Image 6.1: The main control button located on the hilt of the light saber.
6.2 Standby and Boot Status
- Standby Mode: The button light is on, but the blade light effect is not activated.
- Boot Status: Both the button light and the blade light effect are activated.
6.3 Gesture Control
The SN Pixel V4.0 features gesture control for enhanced interaction:
- Turn On/Off Blade: Push and pull, twist, or swing the hilt to activate or deactivate the blade.
6.4 Switching Blade Length (Pixel Number)
To switch the pixel number between 82cm and 92cm blade lengths:
- Ensure the light saber is powered off.
- Click the main button 3 times rapidly.
7. Sound and Light Effects
7.1 Sound Fonts
The light saber includes 27 distinct sound font sets, providing a variety of realistic movie sound effects. These are activated automatically with blade movement and button presses.
7.2 Volume Adjustment
The device offers three volume settings:
- High
- Low
- Mute
Refer to the quick start guide (if provided separately) or experiment with short button presses while the saber is on to cycle through volume settings.
7.3 Blade Colors
The light saber supports 12 changeable blade colors:
- Red
- Blue
- Yellow
- Cyan
- Ice blue
- Green
- Pink
- Orange
- Purple
- Peak-green
- Roseo
- White
To change colors, typically a short press of the main button while the blade is active will cycle through the available colors.
Image 7.1: Light saber with a blue blade.
Image 7.2: Light saber with a yellow blade.
7.4 Blade Effects
The blade features three distinct light effects:
- Stable: A constant, steady light.
- Blaster: Simulates blaster deflections.
- Pulse: A rhythmic pulsing light effect.
Consult the quick start guide or product documentation for specific button combinations to cycle through these effects.
8. Charging
- Connect the provided charging cord to the charging port on the hilt.
- Connect the other end of the charging cord to a 5V 1A charging head (not included).
- A charging prompt will indicate when the battery is properly charging.
- A full charge takes approximately 2 hours.
- When the battery is properly installed, a power-up prompt will sound.
9. Maintenance
- Cleaning: Wipe the hilt with a soft, dry cloth. Do not use abrasive cleaners or solvents. The blade can be gently wiped with a damp cloth if necessary.
- Storage: Store the light saber in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.
10. Troubleshooting
- Saber not turning on: Ensure the battery is charged. Check if the blade is properly installed and the retention screws are tightened.
- No sound: Check the volume setting. Ensure it is not set to mute.
- Blade flickering or inconsistent light: Ensure the blade is fully inserted and the retention screws are secure. A low battery can also cause this; try charging the device.
- Charging issues: Verify that you are using a 5V 1A charging head and the provided charging cord. Ensure the charging port is clean and free of debris.
If issues persist, please contact customer support.
11. Warranty and Support
TXQ SABER provides the following warranty for this product:
- 1-month money-back guarantee.
- 3-month exchange warranty.
For professional assistance or guidance, please contact TXQ SABER customer support. You can visit the official TXQ SABER Store on Amazon for more information: TXQ SABER Store.
