1. Introduction
The K&F CONCEPT ND100000 filter is designed for specialized photography requiring extreme light reduction, particularly for solar observation and long-exposure photography in bright conditions. This filter reduces light by 16.6 f-stops (ND100000, optical density 5.0), allowing for extended shutter speeds and wider apertures without overexposure. It is certified ISO 12312-2:2015 for safe solar viewing through a camera's electronic viewfinder or live-view screen, but not for direct naked-eye solar observation.
This manual provides essential information for the proper use, care, and maintenance of your K&F CONCEPT ND100000 filter.
2. Setup
2.1 Attaching the Filter
- Ensure your camera lens has a 72mm filter thread. If your lens has a different thread size, a step-up or step-down ring (sold separately) may be required.
- Carefully align the filter's thread with the lens's filter thread.
- Gently rotate the filter clockwise until it is securely attached. The CNC anti-slip frame is designed for easy installation and removal. Avoid overtightening.


3. Operating Instructions
3.1 Solar Photography Safety
WARNING: This filter is for camera use only. DO NOT use this filter for direct naked-eye solar observation. When photographing the sun, always use your camera's electronic viewfinder or live-view screen. Looking directly at the sun through an optical viewfinder, even with this filter, can cause severe and permanent eye damage.
Ensure the filter is securely attached to your lens before pointing the camera towards the sun. Never remove the filter while the camera is pointed at the sun.

3.2 Long Exposure Photography
The ND100000 filter reduces incoming light by 16.6 f-stops, enabling very long exposures even in bright daylight. This is ideal for:
- Creating motion blur effects in water (e.g., silky smooth waterfalls, misty oceans).
- Removing moving objects (e.g., people, cars) from busy scenes.
- Achieving a minimalist aesthetic in landscape photography.
Due to the extreme light reduction, manual exposure mode is recommended. Use a tripod to ensure sharpness during long exposures.

3.3 Color Neutrality
This filter is designed with AGC optical glass and a 28-layer nano-coating to ensure high color neutrality and minimal color cast. Any slight color shift can typically be corrected during post-processing.

4. Maintenance
4.1 Cleaning the Filter
The filter features a 28-layer nano-coating that makes it waterproof, oil-resistant, and scratch-resistant. To clean the filter:
- Gently brush off any loose dust or debris using a soft lens brush or air blower.
- If smudges or fingerprints are present, apply a small amount of lens cleaning solution to a clean microfiber cloth.
- Wipe the filter surface in a circular motion from the center outwards until clean. Avoid applying excessive pressure.
- Do not use abrasive materials or harsh chemicals, as these can damage the coating.

4.2 Storage
When not in use, store the filter in its protective case to prevent dust accumulation and accidental damage.
5. Troubleshooting
5.1 Vignetting
The K&F CONCEPT ND100000 filter features an ultra-thin CNC frame designed to minimize vignetting, especially on wide-angle lenses. If you experience vignetting, ensure the filter is correctly mounted and consider using a wider lens or adjusting your focal length if possible.

5.2 Image Softness / Lack of Sharpness
For extremely long exposures, even minor camera shake can cause blur. Always use a sturdy tripod and a remote shutter release or camera's self-timer function to minimize vibrations. Ensure your lens is properly focused, preferably using manual focus after composing your shot.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | K&F CONCEPT |
| Model Number | KF01.2516 |
| Filter Type | Neutral Density (ND) |
| Optical Density | ND100000 (5.0) |
| Light Reduction | 16.6 f-stops |
| Filter Thread Size | 72mm |
| Material | AGC Optical Glass, Aviation Aluminum Frame |
| Coating | 28-layer Nano-coating (Waterproof, Oil-resistant, Scratch-resistant) |
| Frame Type | Ultra-thin CNC Anti-slip Frame |
| Certification | ISO 12312-2:2015 (for solar observation through camera) |
| Weight | 81 Grams |
7. Warranty and Support
K&F CONCEPT products are manufactured to high-quality standards. For warranty information, technical support, or customer service inquiries, please visit the official K&F CONCEPT website or contact their customer support directly. Please retain your proof of purchase for any warranty claims.
Official K&F CONCEPT Website: www.kentfaith.com
