Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DieseRC Smart Wireless Roller Shutter Controller Module. This device allows you to upgrade your traditional roller shutter (or awning/AC motor) to be controlled via a mobile application, RF remote, or manual switch, and integrates with smart home systems like Alexa and Google Home.
Product Overview
The DieseRC Smart Wireless Roller Shutter Controller Module offers a versatile solution for automating your window coverings and other AC motors. Key features include:
- Excellent Design: A compact WIFI + RF wireless roller shutter controller module designed to make your roller shutters smart and convenient.
- Three Control Methods: Compatible with APP control (Tuya/Smart Life), RF remote control, and manual switch operation.
- APP Control: Seamless integration with "Tuya" and "Smart Life" apps for unlimited wireless control via Android and iOS devices. Supports Amazon Alexa and Google Home for voice commands.
- RF Radio Control: Features a 433 MHz RF remote control with stable and reliable performance, high reception sensitivity (> -97 dBm), and a control distance of approximately 30-50 meters in open areas. The controller can store up to 20 transmitters using EV1527 learning code.
- Easy Installation: Compact size (45x45x16 mm) allows for easy concealment in most electrical boxes or junction boxes. Designed for controlling 4-wire or 5-wire AC motors without additional wiring.
- Quality Assurance: Equipped with high-quality relays tested for over 400,000 uses. The WIFI switch uses a 10A relay, with a maximum inductive load of approximately 5A. The receiver supports AC 100V~240V.
- Wide Application: Suitable for homes, farms, factories, offices, and more. Control electric blinds, curtain switches, awnings, roller shutters, garage doors, and other AC motors remotely via the internet. Note: Compatible with 4-wire motors (2 input phase wires, 1 neutral wire, 1 ground wire).
- High-Quality Remote Control: The remote transmitter is designed for over 500,000 clicks and is removable from its base. The base can be wall-mounted using double-sided adhesive or screws (included). Powered by a 12V 27A battery (included), offering approximately 3 years of operation.
- Advanced APP Functions: Offers intelligent controls such as percentage control (set specific open/close percentages) and timer functions. Allows setting movement limits for automatic motor stops. Control can be shared with family members.
- Extended Voice Control: Compatible with Amazon Alexa (Echo/Dot/Spot) and Google Home for voice commands, e.g., "Alexa, open/close the curtain to 50%." Can also be linked with various sensors via the Tuya app.
Safety Information
Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect power at the circuit breaker before installing or servicing the device.
- Installation should be performed by a qualified electrician or in accordance with local electrical codes.
- Do not exceed the maximum load ratings specified in the product specifications.
- Ensure all wire connections are secure and properly insulated.
- Keep the device away from water, moisture, and extreme temperatures.
- This device is for indoor use only unless otherwise specified.
Package Contents
Your package should include the following items:
- 1 x DieseRC Smart Wireless Roller Shutter Controller Module (Receiver)
- 1 x RF 433 MHz Remote Control (Transmitter)
- 1 x 12V 27A Battery (pre-installed in remote)
- Mounting screws and double-sided adhesive for remote base
- User Manual (this document)
Specifications
| Feature | Specification |
|---|---|
| Manufacturer | DieseRC |
| Product Dimensions (L x W x H) | 45 x 45 x 16 mm |
| Weight | 120 grams |
| Model Reference | CurtainWIFI*5+KT204S |
| Material | Plastic |
| Wattage | 3520 Watts |
| Switch Type | 1-way, Relay |
| Operating Mode | Manual and Automatic |
| Current Rating | 10 A |
| Operating Voltage | 100V ~ 240V AC |
| Contact Type | Normally Open |
| Connector Type | Screw Terminal |
| RF Frequency | 433 MHz |
| RF Coding | EV1527 Learning Code |
| Remote Battery | 1 x 12V 27A (included) |
| Connectivity | Wi-Fi 2.4GHz, RF 433MHz |
| APP Compatibility | Tuya Smart, Smart Life |
| Voice Control Compatibility | Amazon Alexa, Google Home |
Setup & Installation
Follow these steps to install and set up your DieseRC Smart Wireless Roller Shutter Controller Module.
1. Wiring the Module
Ensure power is disconnected at the main circuit breaker before proceeding with any wiring. This module is designed for 4-wire AC motors (two phase wires for input, one neutral wire, and one ground wire). The module can be installed with or without an existing manual panel switch.
- Disconnect Power: Turn off the power supply to the circuit at the main breaker.
- Identify Wires: Identify the Live (L), Neutral (N), Motor Up (L1), Motor Down (L2), and Ground (E) wires from your AC motor and power supply.
- Connect Power: Connect the Live (L) wire from your power supply to the 'L' terminal on the module and the Neutral (N) wire to the 'N' terminal on the module.
- Connect Motor: Connect the Motor Up wire to the 'L1' terminal and the Motor Down wire to the 'L2' terminal on the module. Connect the motor's Neutral wire to the 'N' terminal designated for the motor. Ensure the Ground wire is properly connected to the motor and electrical box.
- Connect Panel Switch (Optional): If using a manual panel switch, connect its output wires to the 'S1' (Up) and 'S2' (Down) terminals on the module. The common wire of the switch connects to the 'L' terminal on the module.
- Secure Module: Place the compact module within the electrical box or junction box, ensuring no wires are pinched.
- Restore Power: Once all connections are secure, restore power at the circuit breaker.
2. Resetting the Module (if necessary)
If the module is not in pairing mode (blue LED blinking) or you wish to clear existing pairings, you may need to reset it.
- Reset for Wi-Fi Pairing: Press and hold the learning button on the module for approximately 5 seconds. The blue LED indicator will start blinking rapidly, indicating that the module is in Wi-Fi pairing mode.
- Clear RF Remote Pairing: To clear all paired RF remote controls, press the learning button on the module 8 times. The module will confirm the clearing process. After resetting, the previously paired RF remote will no longer control the module.
3. Wi-Fi Pairing with Tuya/Smart Life App
To enable smart control, pair the module with the Tuya Smart or Smart Life app.
- Download App: Download and install the "Tuya Smart" or "Smart Life" app from your mobile app store. Create an account or log in.
- Enable Wi-Fi & Bluetooth: Ensure your smartphone's Wi-Fi (2.4GHz network) and Bluetooth are enabled.
- Enter Pairing Mode: If not already, reset the module by pressing and holding the learning button for 5 seconds until the blue LED blinks rapidly.
- Add Device: Open the app, tap the "+" icon to add a device. The app should automatically discover the "Curtain Switch" or similar device. If not, select "Add Manually" and choose "Curtain Switch (Wi-Fi)".
- Confirm Pairing: Follow the on-screen prompts to confirm the device and enter your 2.4GHz Wi-Fi network password. The module will connect to your Wi-Fi network.
- Rename Device: Once connected, you can rename the device for easier identification (e.g., "Living Room Blinds").
For the Tuya Smart app, you can scan the QR code for direct download: https://smartapp.tuya.com/tuyasmart
4. Pairing RF Remote Control
The RF remote control allows for direct wireless control without Wi-Fi.
- Enter Learning Mode: Press the learning button on the module once. The blue LED will light up (or blink slowly, depending on the model).
- Press Remote Button: Within 3 seconds, press the "Up" or "Down" button on your RF remote control.
- Confirmation: The module's LED will flash to confirm successful pairing. Repeat for other buttons or additional remotes if desired.
Operating Instructions
1. APP Control (Tuya Smart / Smart Life)
Once paired with the app, you can control your roller shutters from anywhere.
- Open/Close/Pause: Use the virtual buttons in the app to open, close, or pause your roller shutters at any desired position.
- Percentage Control: Utilize the percentage slider in the app to set the exact opening or closing percentage of your roller shutters.
- Timer Function: Set schedules for automatic opening and closing at specific times or days.
- Device Sharing: Share control of the module with family members through the app.
2. RF Remote Control
Use the included RF 433 MHz remote control for convenient local operation.
- Up Button: Press to open the roller shutter.
- Down Button: Press to close the roller shutter.
- Stop Button: Press to pause the roller shutter at its current position.
3. Manual Switch Control
If connected to a traditional manual switch, you can still operate your roller shutters directly.
- Press the "Up" button on your manual switch to open the roller shutter.
- Press the "Down" button on your manual switch to close the roller shutter.
- Press either button again to stop the roller shutter.
4. Voice Control (Alexa / Google Home)
Integrate with your smart assistant for hands-free control.
- Link Account: In the Alexa or Google Home app, link your Tuya Smart/Smart Life account.
- Discover Devices: Ask your smart assistant to discover new devices.
- Voice Commands: Use commands such as:
- "Alexa, open [Device Name]"
- "Hey Google, close [Device Name]"
- "Alexa, set [Device Name] to 50%"
- "Hey Google, stop [Device Name]"
Maintenance
The DieseRC Smart Wireless Roller Shutter Controller Module requires minimal maintenance.
- Cleaning: Wipe the module and remote control with a dry, soft cloth. Do not use liquid cleaners.
- Remote Battery Replacement: The RF remote control uses a 12V 27A battery. When the remote's range decreases or it stops responding, replace the battery. To replace, carefully open the remote casing, remove the old battery, and insert a new one, ensuring correct polarity.
- Firmware Updates: Periodically check the Tuya Smart/Smart Life app for any available firmware updates for the module to ensure optimal performance and security.
Troubleshooting
If you encounter issues with your DieseRC Smart Wireless Roller Shutter Controller Module, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Module not responding to APP/RF remote. | No power, Wi-Fi disconnected, RF remote not paired, remote battery low. | Check power supply. Ensure Wi-Fi is stable (2.4GHz). Re-pair RF remote (see Setup section). Replace remote battery. |
| Roller shutter moves in the wrong direction (Up button closes, Down button opens). | Motor wires L1 and L2 are reversed. | In the Tuya/Smart Life app, go to Device Settings -> Motor Steering Switch and select "Reverse". Alternatively, disconnect power and swap the L1 and L2 motor wires at the module. |
| Module cannot be added to Tuya/Smart Life app. | Module not in pairing mode, incorrect Wi-Fi password, 5GHz Wi-Fi network, Bluetooth off. | Ensure module LED is blinking rapidly (reset if necessary). Verify Wi-Fi password. Connect to a 2.4GHz Wi-Fi network. Ensure Bluetooth is enabled on your phone. |
| Voice control (Alexa/Google Home) not working. | Account not linked, device not discovered, incorrect commands. | Ensure Tuya/Smart Life account is linked in Alexa/Google Home app. Ask assistant to "discover devices". Use correct voice commands as listed in Operating Instructions. |
| Roller shutter stops prematurely or doesn't reach full open/close. | App limit settings, motor calibration. | Check percentage settings in the app. Adjust the motor running time in the app settings (e.g., from default 120s to 20s or 30s as needed). |
Warranty & Support
DieseRC products are designed for quality and reliability. For warranty information, technical support, or any questions not covered in this manual, please contact DieseRC customer service through the retailer where you purchased the product or visit the official DieseRC brand store:
DieseRC Brand Store: https://www.amazon.fr/stores/DieseRC/page/6597D149-CD38-4D25-BB5E-97B20E9A76D1
We are committed to providing practical, energy-saving, safe, efficient, and economical remote control devices and solutions.
