1. Product Overview
The HYPERLITE UFO LED High Bay Light is a high-efficiency lighting solution designed for various large indoor spaces such as workshops, warehouses, garages, and barns. This model features an integrated motion sensor and remote control for enhanced functionality and energy savings. It provides 21,000 lumens of bright 5000K daylight illumination with a power consumption of 150W, offering a significant energy reduction compared to traditional lighting systems.
Image 1.1: Overview of the HYPERLITE UFO LED High Bay Light, showing the light fixture, power cord, and remote control.
2. Safety Instructions
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Electrical Safety: Ensure the power supply is disconnected before installation, maintenance, or cleaning. All electrical connections must comply with local and national electrical codes.
- Voltage Compatibility: This fixture operates on AC120-277V. Verify your power supply voltage matches the product specifications.
- Proper Grounding: The fixture must be properly grounded to prevent electrical shock.
- Installation Environment: This product is rated IP65 waterproof, suitable for damp locations, but ensure the installation area is structurally sound to support the fixture's weight.
- Eye Protection: Avoid direct eye exposure to the light source when the fixture is illuminated, as it emits high brightness.
- Qualified Personnel: Installation should be performed by a qualified electrician or trained personnel.
3. Package Contents
Verify that all components are present and undamaged upon opening the package:
- HYPERLITE UFO LED High Bay Light (1 unit)
- Motion Sensor (pre-installed or separate, refer to specific model)
- Remote Control (1 unit)
- 5ft Power Cord with 110V US Plug (1 unit)
- G-shaped Hanging Hook (1 unit)
- Safety Cable (1 unit)
Image 3.1: Included components: the high bay light, 5ft power cable, G-hook, and safety cable.
4. Product Features
- Motion Activated Function: Equipped with a motion sensor that activates the light upon detecting movement and automatically turns off after a set period of inactivity.
- Remote Control: Allows for convenient adjustment of settings such as detection range, hold time, dimming levels, and standby period.
- High Brightness & Energy Efficiency: Delivers 21,000 lumens at 150W, equivalent to a 650W traditional lamp, with an efficiency of up to 140lm/w.
- Excellent Heat Dissipation: Constructed with a die-cast aluminum housing and designed for optimal heat management, ensuring a long lifespan of over 50,000 hours.
- Durable Construction: Features a heavy-duty die-cast housing and a built-in durable driver, supporting AC120-277V voltage.
- Easy Installation: Comes with a pre-attached 5ft power cord with a 110V US plug and a G-shaped hanging hook for quick and simple setup.
- IP65 Waterproof Rating: Suitable for use in various indoor environments, including those with dust and moisture.
Image 4.1: High efficiency design with 150W power and 21,000 lumens output.
Image 4.2: Exploded view illustrating the excellent heat dissipation provided by the die-cast housing and internal components.
5. Installation Guide
The HYPERLITE UFO LED High Bay Light is designed for quick and easy installation.
5.1. Mounting the Fixture
- Prepare the Mounting Location: Ensure the ceiling or mounting structure is capable of safely supporting the weight of the light fixture.
- Attach the G-Hook: Securely attach the provided G-shaped hanging hook to a suitable mounting point on your ceiling.
- Hang the Fixture: Carefully hang the high bay light onto the G-hook.
- Install Safety Cable: For added security, attach the safety cable from the fixture to a separate, secure point on the mounting structure. This provides double protection against accidental falls.
Image 5.1: The standard G-hook for easy ceiling attachment.
Image 5.2: The safety cable provides additional security, preventing the light from falling.
5.2. Connecting Power
- Ensure Power is OFF: Before connecting, confirm that the power supply to the circuit is turned off at the breaker.
- Plug In: Insert the 110V US plug of the 5ft power cord into a compatible power outlet.
- Restore Power: Once all connections are secure, restore power to the circuit.
Image 5.3: The 5ft power cord with a standard 110V American plug for direct connection.
5.3. Motion Sensor Installation (if separate)
If your motion sensor is not pre-installed, follow these steps:
- Locate the sensor port on the light fixture.
- Unscrew the cover of the base.
- Screw on the motion sensor until it is securely in place. The sensor will then operate automatically.
Image 5.4: Illustration of how to install the pluggable motion sensor by screwing it into the fixture's base.
6. Operating Instructions
6.1. Motion Sensor Function
The integrated motion sensor detects movement within its range and activates the light. If no movement is detected for a specified period, the light will automatically turn off or dim to a standby level.
- Default Setting: The motion sensor is typically pre-set to activate the lights for 30 seconds upon detecting movement.
- Detection Range: The sensor can detect movement up to approximately 49 feet.
- Automatic Operation: The light will turn on automatically when motion is detected and turn off after 30 seconds if no further movement is sensed.
Image 6.1: Depiction of the motion activated function in a warehouse setting, showing a detection range of 49 feet.
6.2. Remote Control Operation
The included remote control allows for customization of the light's behavior. Ensure the motion sensor is installed in the lamp before using the remote control functions.
Image 6.2: Layout of the remote control for the RADAR Series, indicating buttons for reset, dimming, detection range, hold time, standby dimming level, and standby period.
Remote Control Functions:
- On/Off: Power the light on or off.
- Reset: Return settings to factory defaults.
- Dim +/-: Adjust the brightness level. Note: Some models may only offer 10% and 100% brightness options.
- DIY Mode Setting: Customize various parameters.
- Detection Range: Set the sensitivity of the motion sensor (e.g., 25%, 50%, 75%, 100%).
- Hold Time: Adjust how long the light stays on after motion is detected (e.g., 10s, 30s, 1min, 5min, 10min, 30min).
- Stand-by Dimming Level: Set the brightness level when the light is in standby mode (e.g., 10%, 20%, 30%, 50%).
- Stand-by Period: Define how long the light remains in standby mode before turning off completely (e.g., 10s, 1min, 5min, 10min, 30min, +∞).
Note: One remote control can operate multiple HYPERLITE high bay lights equipped with motion sensors.
Image 6.3: A single remote control can manage multiple high bay light fixtures with motion sensors.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your HYPERLITE UFO LED High Bay Light.
- Cleaning: Disconnect power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior of the fixture. Avoid abrasive cleaners or solvents that could damage the finish or electrical components.
- Inspection: Periodically inspect the power cord, hanging hook, and safety cable for any signs of wear, damage, or corrosion. Ensure all connections remain secure.
- No User-Serviceable Parts: The LED light source and driver are not user-serviceable. Do not attempt to open or repair the fixture. Contact qualified personnel for any issues beyond basic troubleshooting.
8. Troubleshooting
If you encounter issues with your high bay light, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose connection; faulty outlet/switch. | Check power cord connection. Verify power at the outlet. Check circuit breaker. |
| Light turns off randomly or too quickly. | Motion sensor settings (hold time, detection range); interference. | Adjust 'Hold Time' and 'Detection Range' settings using the remote control. Ensure no obstructions are blocking the sensor. |
| Light stays on constantly. | Motion sensor setting (standby period); continuous motion detected. | Adjust 'Stand-by Period' to a finite time. Ensure no constant motion is within the sensor's range. |
| Remote control not working. | Batteries depleted; sensor not installed; remote out of range. | Replace remote control batteries. Ensure motion sensor is correctly installed. Operate remote within effective range. |
| Brightness not adjustable as expected. | Model limitation; incorrect remote setting. | Some models may only offer specific brightness steps (e.g., 10% or 100%). Refer to the remote control diagram for available options. |
9. Technical Specifications
| Feature | Specification |
|---|---|
| Model Name | HB-RADAR-150W |
| Wattage | 150W |
| Brightness | 21,000 Lumens |
| Light Color | 5000K (Cool White) |
| Voltage | AC120-277V |
| Material | Aluminum |
| Dimensions (L x W x H) | 12.99" x 6.5" x 12.99" |
| Item Weight | 7.15 pounds |
| IP Rating | IP65 Waterproof |
| Special Feature | Motion Sensor, Remote Control |
| Lifespan | 50,000+ hours |
| Installation Type | Semi Flush Mount (Hook) |
10. Warranty and Customer Support
HYPERLITE products are designed for durability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official HYPERLITE website.
If you require technical assistance, have questions about installation, or need to report a defect, please contact HYPERLITE customer support through their official channels. Provide your product model number (HB-RADAR-150W) and purchase date for faster service.
Online Support: Visit the HYPERLITE store on Amazon or their official website for FAQs and contact information.
