EasyKeys Replacement Key for Sentry Safe/Schwab 251 File Cabinet Locks - Instruction Manual

1. Introduction

This instruction manual provides essential information for identifying and ordering a replacement key for your Sentry Safe/Schwab 251 file cabinet, desk, or cubicle lock. Please follow these guidelines carefully to ensure you receive the correct key.

2. Product Overview

The EasyKeys replacement key is designed for Sentry Safe/Schwab locks with the code 251. It is compatible with various file cabinets, desks, and cubicles. This key is a custom-cut, single-sided key, specifically for cam locks. It is important to note that this key is not for safes or X series locks.

• Key Type: Single-sided cut key
• Lock Type: Cam lock
• Material: Brass
• Compatibility: Sentry Safe / Schwab (codes 001-336), CompX Fort, Meilink

3. How to Find Your Lock Code

To order the correct replacement key, you must accurately identify your lock code. The lock code is typically a series of numbers or alphanumeric characters. Refer to the image below for common locations where you can find your lock code.

Image: Common locations for identifying your lock code.

1. On the Key: The code may be stamped directly on your existing key (e.g., FR322).
2. On the Lock Face: The code can often be found engraved on the visible face of the lock cylinder (e.g., FR322).
3. On a Label Inside/Behind the Lock: For some locks, the code might be on a label located inside or behind the lock mechanism (e.g., CODE: G38).
4. On the Cabinet/Door Label: Check for a label on the cabinet or door itself, near the lock (e.g., HF321).

Important Notes:

• ⚠ Order by Manufacturer: Lock codes are manufacturer-specific. Ensure the manufacturer of your lock matches the key you are ordering.
• ⚠ Key Cuts Differ: Even if codes appear similar, the actual key cuts vary significantly by brand.

4. Ordering a Replacement Key

Once you have identified your lock code (e.g., 251) and confirmed the manufacturer (Sentry Safe / Schwab, CompX Fort, Meilink), you can proceed with ordering your replacement key. Verify that the lock code and manufacturer listed in the product title match your requirements.

5. Specifications

6. Support

For further assistance or inquiries regarding your EasyKeys replacement key, please refer to the seller's contact information on the platform where the purchase was made. Ensure you have your lock code and manufacturer details ready when contacting support.