Hurom H70 Cold Press Juicer Machine User Manual

Introduction

Welcome to your new Hurom H70 Cold Press Juicer Machine. This manual provides essential information for the safe and efficient operation, maintenance, and care of your juicer. Please read it thoroughly before first use.

The Hurom H70 is engineered for optimal juice extraction, featuring a revolutionary strainer-free design for easy cleaning and a large self-feeding hopper for convenient use. It is designed to deliver high juice yield and smooth texture from various fruits and vegetables.

Important Safety Instructions

Before operating the appliance, read all instructions. Keep this manual for future reference.

• Always ensure the juicer is properly assembled before use.
• Do not insert fingers or other objects into the feeding chute while the appliance is operating.
• Unplug the appliance from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Do not immerse the motor base in water or other liquids.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Product Components

Familiarize yourself with the main parts of your Hurom H70 juicer:

• Self-Feeding Hopper: For adding ingredients.
• Easy Clean Chamber: The main juicing mechanism.
• Pulp Outlet: Where processed pulp exits.
• Juice Spout: Where extracted juice is dispensed.
• On/Off Switch: To control operation.
• Removable Power Cord: For easy storage.
• BPA-Free, Impact-Resistant ABS Plastic: Durable construction.

Figure 1: Key components of the Hurom H70 Slow Juicer.

Setup and Assembly

The Hurom H70 features an intuitive design with fewer parts for fast and frustration-free assembly.

1. Place the motor base on a stable, flat surface.
2. Align the Easy Clean chamber with the motor base and rotate clockwise until it locks into place.
3. Insert the auger system into the chamber.
4. Place the self-feeding hopper on top of the chamber and secure it.
5. Ensure the pulp outlet and juice spout are correctly positioned.
6. Connect the power cord to a suitable electrical outlet.

Figure 2: Assembled Hurom H70 Juicer ready for use.

Operating Your Juicer

The H70 is designed for efficient juice extraction with minimal preparation.

1. Preparation: Wash all fruits and vegetables thoroughly. For fibrous ingredients like celery or ginger, cut them into smaller pieces to prevent clogging. The wide inlet minimizes the need for extensive pre-chopping for many items.
2. Start Juicing: Place a juice collection cup under the juice spout and a pulp collection container under the pulp outlet. Turn the On/Off switch to 'ON'.
3. Add Ingredients: Slowly feed ingredients into the self-feeding hopper. The juicer's design allows for continuous feeding.
4. Use the Pusher (if needed): If ingredients get stuck or need assistance, gently use the provided pusher to guide them down.
5. Reverse Function: If ingredients become severely jammed, switch the juicer to 'REV' (Reverse) for a few seconds to dislodge them, then switch back to 'ON'.
6. Juice Flow Control: The juice spout features a cap to control juice flow. Close it to mix juices within the chamber or open it to dispense.
7. Completion: Once all ingredients are processed, turn the On/Off switch to 'OFF' and unplug the appliance.

Figure 3: Adding ingredients to the self-feeding hopper.

Figure 4: Fresh juice being dispensed from the Hurom H70.

Demonstration Video: Juicing Process

Video 1: This video demonstrates the Hurom H70 juicer in action, showing the process of feeding various fruits and vegetables, the pulp collection, and the juice extraction. It also highlights the reverse function and the ease of cleaning.

Maintenance and Cleaning

The Hurom H70 features a revolutionary strainer-free design for effortless cleaning. Regular cleaning ensures optimal performance and longevity of your juicer.

1. Disassembly: Ensure the juicer is unplugged. Remove the self-feeding hopper, then rotate the Easy Clean chamber counter-clockwise to detach it from the motor base. Disassemble the auger system and other internal components.
2. Rinsing: Rinse all detachable parts under running water immediately after use. The two-part auger system naturally filters pulp, reducing buildup.
3. Washing: Use the provided cleaning brush to remove any remaining pulp or residue. All detachable parts are recommended for hand washing only. Avoid abrasive cleaners or scouring pads.
4. Drying: Allow all parts to air dry completely before reassembling or storing.
5. Motor Base: Wipe the motor base with a damp cloth. Never immerse the motor base in water.

Figure 5: Cleaning the strainer-free components of the Hurom H70.

Troubleshooting

If you encounter any issues with your Hurom H70 juicer, please refer to the following common solutions:

• Juicer does not turn on: Ensure the power cord is securely plugged into a working outlet and all components are correctly assembled and locked into place. The safety features prevent operation if not properly assembled.
• Ingredients are stuck: Use the 'REV' (Reverse) function to dislodge jammed ingredients. If necessary, disassemble and clear any blockages. Ensure fibrous ingredients are cut into smaller pieces.
• Low juice yield or wet pulp: Ensure ingredients are fresh. For optimal extraction, feed ingredients slowly and allow the juicer to process them completely before adding more.
• Excessive noise: Some noise is normal during operation. If the noise is unusually loud or accompanied by vibrations, check for proper assembly and ensure no foreign objects are in the juicing chamber.

For further assistance, please contact Hurom customer support.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official Hurom website. Keep your purchase receipt as proof of purchase.