MLILY Queen Size Adjustable Bed Base Frame and 14 inch Copper Gel Memory Foam Mattress Set Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your MLILY Queen Size Adjustable Bed Base Frame and 14 inch Copper Gel Memory Foam Mattress Set. Please read all instructions carefully before use to ensure proper setup and safe operation.

Important Safety Information

• Weight Capacity: Do not load more than 850 pounds on the adjustable bed frame. Exceeding this limit may cause damage to the frame and void the warranty.
• Assembly: Ensure proper assembly of all components to avoid instability. Refer to the assembly section for detailed steps.
• Pinch Points: Exercise caution around moving parts of the adjustable bed frame to prevent injury from pinch points or sharp edges. Keep children and pets away from the mechanism during operation.
• Electrical Safety: Ensure the power cord is not pinched or damaged. Do not operate the bed with a damaged cord or plug.
• Mattress Care: The mattress is vacuum compressed. Allow sufficient time for it to fully expand after unboxing. Opened mattresses cannot be returned.

Setup and Assembly

The adjustable bed frame is designed for easy assembly. Follow these steps to set up your new bed.

Figure 1: Overview of the MLILY adjustable bed frame and 14-inch mattress set components. The image shows the mattress, bed frame, and premium steel components, highlighting the 14-inch mattress thickness and the foldable bed frame feature.

Adjustable Bed Base Assembly Instructions

1. Step 1: Unpack the Bed Frame. Carefully remove the bed frame from its packaging.
2. Step 2: Cut Zip Ties and Remove Corner Legs. Cut all zip ties securing the frame and remove the corner legs from the box.
3. Step 3: Attach Corner Legs. Rotate the end bolt into the hole in the corner brackets and tighten it securely.
4. Step 4: Insert Mattress Retainer Bar. Insert the mattress retainer bar into the grommets as shown.

Figure 2: Visual guide for adjustable bed base assembly. This image illustrates the four key steps: unpacking, removing legs, attaching legs, and inserting the mattress retainer bar.

Mattress Setup

The 14-inch memory foam mattress is vacuum compressed for transport. After placing the adjustable bed base in your desired location:

1. Carefully unbox the compressed mattress.
2. Place the rolled mattress onto the adjustable bed base.
3. Cut the plastic wrapping and allow the mattress to expand fully. This may take up to 48-72 hours.

Operating Instructions

Your adjustable bed base is controlled by a wireless remote. Familiarize yourself with the remote's functions for optimal comfort.

Figure 3: Diagram of the wireless remote control and its functions. It shows buttons for head incline, foot incline, flat position, zero gravity, and a flashlight.

Wireless Remote Functions:

• HEAD: Press and hold to raise or lower the head section of the bed. Head incline ranges from 0 to 57 degrees.
• FOOT: Press and hold to raise or lower the foot section of the bed. Foot incline ranges from 0 to 38 degrees.
• FLAT: Press to move both the head and foot sections to a flat position.
• ZERO GRAVITY: Press to move the bed to a pre-programmed zero-gravity position, designed to relieve pressure.
• LIGHT: Press to turn on the flashlight. Press again to turn off the flashlight.
• Programmable Memory Positions: The remote also includes two programmable memory positions to save your preferred settings.

Figure 4: Illustration of independent head and foot incline capabilities. Shows head incline from 0-57 degrees and foot incline from 0-38 degrees, along with an 850 lbs load test indication.

Figure 5: Various comfortable position levels achievable with the adjustable bed. Includes Head Lift, Head & Foot Lift, Foot Lift, and Flat Level, also showing the folding feature for transport.

Maintenance and Care

Mattress Care:

• Cleaning: The manufacturer recommends hand washing for the mattress cover. Do not machine wash or tumble dry.
• Protection: Use a mattress protector to safeguard against spills and stains.
• Ventilation: Ensure adequate ventilation around the mattress to maintain freshness and prevent moisture buildup.

Adjustable Bed Frame Care:

• Cleaning: Wipe the metal frame with a damp cloth as needed. Avoid harsh chemicals.
• Inspection: Periodically check all bolts and connections to ensure they are tight.
• Motor Care: Keep the motor and electrical components free from dust and debris. Do not attempt to open or service the motor yourself.

Troubleshooting

Product Specifications

• Model Number: BLADJ-14Q
• Size: Queen
• Product Dimensions: 79.99"L x 60"W x 17"H
• Material: Metal (Frame)
• Mattress Thickness: 14 inches
• Weight Capacity: 850 pounds
• Special Feature: Adjustable Head and Foot Incline (Head: 0-57°, Foot: 0-38°), Zero Gravity, Anti-Snore presets.
• Included Components: 14 inch Mattress, Adjustable Bed Frame, Wireless Remote.
• Assembly Required: Yes

Figure 6: Detailed layers of the premium mattress, endorsed by ICA. Features Graphene Technology Cover, Fiberglass Free Inner Cover, Ventilated Copper Gel Infused Aerofusion Memory Foam, Adaptifoam Layer, Liquid Gel Flex Foam, Flex Support Base Foam, and Non-Slip Bottom.

Warranty and Customer Support

MLILY is dedicated to providing superior products and customer satisfaction. If your adjustable bed frame or mattress is defective or damaged during delivery, please contact our U.S.-based customer support team for assistance.

• Warranty: Please refer to your purchase documentation for specific warranty details.
• Returns: Please note that there is no trial period for this product. Opened mattresses cannot be returned.
• Contact: For support, please visit the MLILY store on Amazon or contact EGOHOME USA directly.