ASUS ProArt PA602 E-ATX PC Case Instruction Manual

1. Product Overview

The ASUS ProArt PA602 E-ATX Computer Case is engineered for creators and enthusiasts, offering superior airflow, thermal management, and extensive compatibility for high-performance components. Designed with user-friendly features, it simplifies the building and maintenance process.

Figure 1.1: Front-side view of the ASUS ProArt PA602 E-ATX PC Case with internal components visible.

Official Product Videos

2. Key Features

• Superior Airflow: Features a 15.5 mm front panel grill with 45% porosity, two extra-thick 200 x 38 mm front fans for maximum air intake, and a 140 mm rear exhaust fan. This design ensures optimal air circulation throughout the chassis.
  

  Figure 2.1: Illustration of the 15.5mm open front grill, extra-thick PWM fans, and air deflectors optimizing whole-system cooling.

• Superior Thermals: Two strategic air deflectors guide incoming air towards the motherboard and other internal components, optimizing temperatures. An integrated fan hub is included for centralized fan management.
  

  Figure 2.2: Close-up of the integrated PWM fan hub, supporting up to six fans for efficient cooling optimization.
• Ample Space: Supports a 420 mm radiator for AIO cooling or custom liquid-cooling loops. Provides generous room for robust graphics cards, allowing for both horizontal and vertical mounting options.
  

  Figure 2.3: Diagram illustrating support for a 420mm AIO radiator and graphics cards up to 450mm horizontally or 125mm vertically.

• Extensive I/O: The front panel features a Power Lock Latch, 2-section PWM control, and a 20Gbps USB Type-C port, alongside multiple USB 2.0 and USB 3.0 ports for versatile connectivity.
  

  Figure 2.4: Detailed view of the front panel I/O, including fan speed control, USB ports, and power controls.

• Front Panel IR Dust Indicator: Provides timely reminders to clean the front filter, ensuring sustained top-tier airflow and system longevity.
  

  Figure 2.5: Close-up of the IR dust indicator, signaling when the front filter requires cleaning.
• Creator-Friendly Design: Features tool-less graphics card mounting, an integrated graphics card holder, and built-in wheels for easy transport. These elements contribute to a sleek ProArt aesthetic and user convenience.
  

  Figure 2.6: Integrated GPU holder for secure graphics card installation.

  

  Figure 2.7: Built-in wheels for convenient movement of the PC case.

3. Technical Specifications

4. Setup and Installation Guide

This section provides general guidelines for setting up your ASUS ProArt PA602 PC case. For detailed component-specific instructions, please refer to your motherboard, GPU, and PSU manuals.

4.1 Preparing the Case

1. Unpack the Case: Carefully remove the case from its packaging. Inspect for any shipping damage.
2. Access Interior: The side panels can be easily removed for access to the interior. Refer to the 'Creator-Friendly Design' section for tool-less access.
3. Remove Dust Filters: For easier installation and initial cleaning, remove the front and top dust filters. The front filter is accessible by opening the front panel.

4.2 Component Installation

1. Motherboard Installation: Install your E-ATX or smaller motherboard onto the pre-installed standoffs. Secure with screws.
2. Power Supply Unit (PSU) Installation: Mount your PSU in the designated bottom compartment. Ensure proper orientation for airflow.
3. Graphics Card (GPU) Installation: The case supports tool-less GPU mounting. Install your graphics card either horizontally into the PCIe slot or vertically using an optional riser cable (not included) and the integrated GPU holder. Adjust the GPU holder for optimal support.
   

   Figure 4.1: Illustration of the tool-less GPU mounting mechanism.
4. Storage Drive Installation: Install 2.5-inch SSDs or 3.5-inch HDDs into the available drive bays. The case offers flexible mounting options for storage.
5. Radiator/AIO Installation: If using liquid cooling, install your 420mm or smaller radiator/AIO in the top or front mounting locations.

4.3 Cable Management

Utilize the ample space behind the motherboard tray and the included cable routing channels and Velcro straps to manage cables effectively. Connect all power cables from the PSU to your components and the front panel I/O cables to your motherboard.

5. Operating Instructions

5.1 Power On/Off

• Power Button: Press the large power button on the front I/O panel to turn the system on or off.
• Power Lock Latch: Engage the Power Lock Latch on the front I/O panel to prevent accidental power-offs during critical tasks.

5.2 Front I/O Usage

• USB Ports: Connect USB devices to the available USB Type-C (20Gbps), USB 3.0, or USB 2.0 ports.
• Audio Jack: Connect headphones or a microphone to the combined audio jack.
• Fan Control: Use the fan control button to switch between MAX (maximum fan speed) and AUTO (motherboard-controlled PWM fan speed) modes.

5.3 IR Dust Indicator

The Front Panel IR Dust Indicator will illuminate or change color to alert you when the front dust filter requires cleaning. This helps maintain optimal airflow and system performance.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your PC case.

6.1 Dust Filter Cleaning

1. Front Filter: Gently open the front panel and slide out the front dust filter. Clean it with compressed air or rinse with water. Ensure it is completely dry before reinstallation.
2. Top Filter: The top filter can be accessed by removing the top panel. Clean as described for the front filter.
3. Bottom Filter: Slide out the bottom dust filter from the front or rear of the case. Clean as described above.

6.2 General Cleaning

Use a soft, dry cloth to wipe down the exterior of the case. For stubborn smudges on tempered glass panels, use a glass cleaner applied to the cloth (not directly to the glass).

7. Troubleshooting

7.1 Common Issues

• System Not Powering On: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU PCIe power) are securely connected. Verify the PSU switch is in the 'ON' position. Check front panel power button connection to the motherboard.
• High Temperatures: Ensure all case fans are spinning correctly and connected to the fan hub or motherboard. Check that dust filters are clean. Verify CPU cooler and GPU fans are functioning.
• IR Dust Indicator Always On/Off: If the indicator behaves unexpectedly after cleaning, ensure the sensor area is clear of obstructions. If the issue persists, contact support.
• USB Ports Not Functioning: Verify front panel USB headers are correctly connected to the motherboard. Check motherboard BIOS settings for USB port enablement.

For further assistance, please refer to the ASUS support website or contact their customer service.

8. Warranty and Support

Your ASUS ProArt PA602 E-ATX PC Case is covered by a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please visit the official ASUS support website.

Online Support: For the latest drivers, FAQs, and troubleshooting guides, please visit the ASUS Support Website.

Customer Service: If you require direct assistance, please contact ASUS customer service through the channels provided on their support website.