Product Overview
The LivePure LP-PF500 Pre-Filter is designed to enhance the performance of LivePure air purifiers, specifically models LP500APHTR, LP520APHTR, and LP580APHTR. This pre-filter serves as the initial filtration stage, capturing larger airborne particles such as dust, pet hair, and pollen. By removing these larger contaminants, it helps to extend the operational life of your air purifier's main filter and contributes to improved indoor air quality by allowing the primary filter to more effectively target smaller pollutants.
Key Features:
- Enhanced Air Purification: Acts as the first line of defense, capturing larger airborne particles like dust, pet hair, and pollen.
- Prolongs Main Filter Lifespan: Reduces clogging of the primary filter, allowing it to function optimally for a longer period.
- Improved Indoor Air Quality: Enables the main air purifier to more effectively target smaller pollutants.
- Easy Installation: Designed for hassle-free replacement within compatible LivePure air purifier systems.
- Cost-Effective Solution: Helps reduce the frequency of main filter replacements, leading to long-term savings.
Setup and Installation
This section provides general guidance for installing the LivePure LP-PF500 Pre-Filter. Always refer to your specific LivePure air purifier model's manual for detailed instructions, as steps may vary slightly.
- Prepare the Air Purifier: Ensure the air purifier is turned off and unplugged from the power outlet before beginning any maintenance or installation.
- Access the Filter Compartment: Locate and open the filter compartment of your LivePure air purifier. This usually involves twisting off the top or removing a cover.
- Remove Old Filter: Carefully remove the used pre-filter and any other filters as instructed by your air purifier's manual. Dispose of the old filter responsibly.
- Unpack New Pre-Filter: Remove the new LivePure LP-PF500 Pre-Filter from its plastic packaging.
- Install New Pre-Filter: Insert the new pre-filter into the designated slot or area within the air purifier. Ensure it is seated correctly and securely.
- Reassemble: Close the filter compartment and reattach any covers or tops that were removed.
- Power On: Plug the air purifier back into the power outlet and turn it on.
For a visual guide on filter replacement, please refer to the relevant video below. While the video may feature a different air purifier model, the general process for filter replacement is similar.
Video: Filter Replacement for Blue Pure 311 Air Purifier. This video demonstrates the general steps for replacing an air purifier filter, which can be applied to the LivePure LP-PF500 Pre-Filter installation.
Operating Instructions
The LivePure LP-PF500 Pre-Filter operates passively as part of your LivePure air purifier system. Once installed, it continuously works to capture larger airborne particles as air is drawn into the purifier. No specific operational steps are required for the pre-filter itself beyond proper installation and regular maintenance.
Maintenance
Regular maintenance of your LivePure LP-PF500 Pre-Filter is crucial for maintaining optimal air purifier performance and extending the life of your main filter. The pre-filter should be checked and replaced periodically.
Filter Replacement Frequency:
- The frequency of replacement depends on usage and air quality conditions.
- Typically, pre-filters should be replaced every 6-12 months.
- Monitor the filter for visible accumulation of dust and debris. A heavily soiled pre-filter indicates it's time for replacement.
Steps for Replacement:
Follow the "Setup and Installation" steps above to replace your pre-filter. Always ensure the air purifier is unplugged before handling filters.

Image: LivePure LP-PF500 Pre-Filter pack. This image displays the two pleated white pre-filters and four black carbon filters included in the pack, ready for replacement.
Troubleshooting
If your air purifier's performance seems diminished after installing a new pre-filter, consider the following:
- Incorrect Installation: Double-check that the pre-filter is installed correctly and securely within the air purifier, ensuring no gaps.
- Main Filter Condition: The pre-filter extends the life of the main filter, but the main filter still requires periodic replacement. Check the condition of your main filter.
- Air Purifier Malfunction: If issues persist, consult your LivePure air purifier's main instruction manual for troubleshooting specific to the unit itself.
Specifications
| Attribute | Detail |
|---|---|
| Product Dimensions | 17.52 x 17.52 x 12.4 inches |
| Item Weight | 0.32 ounces |
| Manufacturer | LivePure |
| Item Model Number | LP-PF500 |
| Compatibility | LivePure LP500APHTR, LP520APHTR & LP580APHTR Air Purifiers |
Warranty and Support
This product is a replacement pre-filter. The manufacturer's warranty for the pre-filter itself is generally not applicable, as stated in the product specifications ("Warranty Description: Not applicable."). For information regarding the warranty of your LivePure air purifier unit, please refer to the manual provided with your air purifier.
For product support or inquiries regarding LivePure products, please visit the official LivePure store or contact their customer service. You can find more information at the LivePure Store on Amazon.





