GRIFEMA GD101-2

Download PDF
Contents

GRIFEMA GD101-2 Night Light User Manual

Model: GD101-2 | Brand: GRIFEMA

1. Introduction

The GRIFEMA GD101-2 Night Light is designed to provide soft, warm illumination for various indoor spaces. Featuring an intelligent light sensor and adjustable brightness levels, it offers energy-efficient and convenient lighting for children's rooms, bathrooms, hallways, kitchens, and staircases. This manual provides essential information for the safe and effective use of your night light.

Two GRIFEMA GD101-2 night lights plugged into wall outlets, emitting a warm yellow glow in a dimly lit room.

Image: Two GRIFEMA GD101-2 night lights providing ambient lighting.

2. Safety Information

  • Ensure the product is plugged into a standard wall outlet (220-240V).
  • Do not disassemble or modify the night light.
  • Keep away from water and high humidity environments.
  • This product is for indoor use only.
  • Do not cover the light or the sensor.
  • For recycling information regarding this and other types of bulbs, please refer to local regulations.
  • For information on how to clean and dispose of broken or deteriorated bulbs, consult local waste management guidelines.

3. Package Contents

  • 2 x GRIFEMA GD101-2 Night Lights
  • 1 x User Manual (this document)

4. Setup

  1. Unpack the night light from its packaging.
  2. Locate a suitable wall outlet in the desired area (e.g., hallway, bedroom, bathroom).
  3. Plug the GRIFEMA GD101-2 Night Light directly into the wall outlet. Ensure it is securely seated.
  4. The light will automatically activate when the ambient light is insufficient, thanks to its built-in sensor.
Diagram showing the dimensions of the GRIFEMA GD101-2 night light: 80mm height, 51mm width, 58mm depth, and 18mm thickness.

Image: Product dimensions for proper placement.

5. Operating Instructions

5.1. Automatic Light Sensor

The GRIFEMA GD101-2 is equipped with an intelligent light sensor. This sensor detects the ambient light level in the room. When the room becomes dark (e.g., at dusk or night), the night light will automatically turn on. Conversely, when the room becomes bright (e.g., at dawn or during the day), the light will automatically turn off.

Illustration showing the automatic on/off function of the night light. On the left, a dark room with the light on, labeled 'Automatic ON'. On the right, a bright room with the light off, labeled 'Automatic OFF'.

Image: Automatic ON/OFF functionality based on ambient light.

Close-up image of the night light plugged into an outlet next to a sleeping child, with an arrow pointing to the light sensor located at the bottom of the device.

Image: The light sensor is located at the bottom for real-time sensing.

5.2. Adjustable Brightness Levels

The night light features 3 adjustable brightness levels (Low, Medium, High) and an Off setting. You can cycle through these levels by pressing the button located on the front of the device.

  • Press 1: Low brightness (softest illumination).
  • Press 2: Medium brightness (moderate illumination).
  • Press 3: High brightness (brightest illumination).
  • Press 4: Off (light turns off).
Four panels illustrating the brightness levels: Off, Low, Mid, and High, with corresponding light icons. A hand is shown pressing the button on the night light.

Image: Adjusting brightness levels (Off, Low, Medium, High).

Diagram highlighting key features of the night light: 1. 4-gear brightness, 2. Brightness adjustable button, 3. Intelligent sensor.

Image: Key features and their locations on the device.

6. Maintenance

  • To clean the night light, unplug it from the wall outlet.
  • Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ensure the light is completely dry before plugging it back in.
  • No user-serviceable parts inside. Do not attempt to open the casing.

7. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.No power to the outlet.
Room is too bright.
Light is set to "Off" mode.
Check if the outlet is working.
Ensure the room is sufficiently dark for the sensor to activate.
Press the button to cycle through brightness levels.
Light stays on during the day.Sensor is obstructed.
Room is not bright enough.
Ensure nothing is blocking the light sensor at the bottom of the device.
Verify that the room has adequate ambient light for the sensor to detect daylight.
Brightness levels do not change.Button malfunction.Unplug the device and plug it back in. If the issue persists, contact customer support.

8. Specifications

  • Model Number: GD101-2
  • Dimensions: 5.8 x 5 x 8 cm (2.28 x 1.97 x 3.15 inches)
  • Weight: 54 g (0.12 lbs)
  • Power Consumption: 0.5 W
  • Color Temperature: 2700K Warm White
  • Material: Plastic
  • Light Source Type: LED (Light Emitting Diode)
  • Switch Type: Integrated Push Button (The input states "Remote", but the product features an integrated button for brightness adjustment.)
  • Bulb Base: Not applicable (The input states "GU10", but this is an integrated LED unit, not designed for replaceable GU10 bulbs.)
  • Country of Origin: Spain

9. Warranty and Support

GRIFEMA products are manufactured to high-quality standards. For any issues or inquiries regarding your GD101-2 Night Light, please contact GRIFEMA customer support through the retailer where you purchased the product or visit the official GRIFEMA website for assistance.

Please retain your proof of purchase for warranty claims.

For more information, visit the GRIFEMA Store on Amazon.

© 2025 GRIFEMA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.