1. Introduction
Thank you for choosing the Hisense Stainless Steel Free Standing Gas/Electric Stove. This appliance is designed to provide versatile and powerful cooking capabilities, combining the precision of gas burners with the consistent heat of an electric oven. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new stove. Please read it thoroughly before use and keep it for future reference.
Figure 1.1: Front view of the Hisense Stainless Steel Free Standing Gas/Electric Stove, showcasing its stainless steel finish and control panel.
2. Safety Information
Your safety and the safety of others are paramount. This manual contains important safety messages. Always read and obey all safety messages. Failure to do so could result in serious injury or death.
General Safety Precautions:
- Installation: Ensure the appliance is installed by a qualified technician in accordance with local codes and regulations.
- Gas Safety: Check for gas leaks immediately after installation and periodically thereafter. Do not use an open flame to check for leaks.
- Electrical Safety: Ensure the electrical supply matches the rating plate specifications. Do not use extension cords.
- Ventilation: Ensure adequate ventilation in the kitchen area when operating the gas burners.
- Hot Surfaces: The oven and hob surfaces become hot during operation. Use oven mitts and exercise caution.
- Children and Pets: Keep children and pets away from the appliance during operation and when it is cooling down.
- Flammable Materials: Do not store or use flammable materials near the stove.
3. Unpacking and Installation
3.1 Unpacking
Carefully remove all packaging materials from the appliance. Inspect the stove for any signs of damage during transit. If damage is found, do not install or operate the appliance and contact your retailer immediately.
3.2 Positioning and Leveling
Place the stove on a flat, stable surface. Use the adjustable feet at the bottom of the appliance to ensure it is perfectly level. Proper leveling is crucial for even cooking and safe operation of the gas burners.
Figure 3.1: Front view
Figure 3.2: Side view
Figure 3.3: Top view (Hob)
3.3 Gas Connection
The gas connection must be performed by a qualified and licensed gas fitter. Ensure the gas type (Natural Gas or LPG) matches the appliance specifications. A gas shut-off valve must be installed in an accessible location near the appliance.
3.4 Electrical Connection
The electrical connection must be performed by a qualified electrician. Ensure the voltage and frequency of your household electrical supply match the requirements stated on the appliance's rating plate. The appliance must be properly earthed.
4. Operating Instructions
4.1 Gas Hob Operation
- Ignition: Push and turn the desired burner knob counter-clockwise to the maximum flame position. The integrated ignition will spark.
- Flame Control: Once ignited, hold the knob for a few seconds to allow the thermocouple to heat up. Release the knob. If the flame extinguishes, repeat the process. Adjust the flame size by turning the knob between the maximum and minimum flame settings.
- Safety: Always ensure the flame is stable before leaving the burner unattended. Do not leave cooking unattended.
4.2 Electric Oven Operation
- Function Selection: Turn the function selector knob to choose the desired cooking mode (e.g., Bake, Grill, Fan Bake).
- Temperature Setting: Turn the temperature control knob to set the desired oven temperature.
- Preheating: Allow the oven to preheat to the set temperature before placing food inside. The indicator light will turn off when the desired temperature is reached.
- Oven Light: The oven typically has a separate control or is integrated with a function for the internal light.
5. Cleaning and Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your Hisense stove.
5.1 General Cleaning
- Always ensure the appliance is cool before cleaning.
- Use a soft cloth and mild detergent for stainless steel surfaces. Avoid abrasive cleaners or scouring pads, which can scratch the finish.
- Wipe up spills immediately to prevent staining and baked-on residue.
5.2 Hob Cleaning
- Remove burner caps and pan supports. Wash them in warm soapy water, rinse, and dry thoroughly before reassembling.
- Clean the hob surface with a damp cloth and mild detergent.
- Ensure burner ports are clear of food debris to maintain efficient flame.
5.3 Oven Cleaning
- Remove oven racks and clean them separately.
- Wipe the interior of the oven with a damp cloth and a non-abrasive oven cleaner, following the cleaner's instructions.
- For stubborn stains, a paste of baking soda and water can be applied, left for a while, then wiped clean.
6. Troubleshooting
Before contacting service, please check the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Gas burner does not ignite. | No gas supply; burner ports clogged; ignition electrode dirty/damaged. | Check gas valve; clean burner ports; clean or inspect ignition electrode. |
| Oven not heating. | No electrical power; incorrect function/temperature setting; faulty heating element. | Check power supply/circuit breaker; verify settings; contact service if element is faulty. |
| Uneven cooking in oven. | Oven not preheated; food placed incorrectly; oven not level. | Preheat oven fully; ensure proper air circulation around food; level the appliance. |
| Gas smell. | Gas leak. | Immediately turn off gas supply, open windows, do not operate electrical switches, and contact a qualified gas fitter. |
7. Specifications
| Feature | Specification |
|---|---|
| Brand | Hisense |
| Model Number | HFS90GA5ES |
| Colour | Multicolor |
| Package Dimensions | 96 x 83 x 68 cm |
| Material | Stainless Steel |
| Item Weight | 65 kg |
| Product Dimensions | 96L x 68W x 83H centimetres |
| Power Source | Corded Electric |
8. Warranty and Support
Hisense products are manufactured to the highest quality standards and are backed by a comprehensive warranty. For specific warranty terms and conditions, please refer to the warranty card included with your appliance or visit the official Hisense website.
For technical support, spare parts, or service inquiries, please contact Hisense customer service or an authorized service center. Ensure you have your model number (HFS90GA5ES) and purchase details ready when contacting support.
You can find more information and support on the official Hisense website: www.hisense.co.za