Mondeer 5-Piece Dining Table Set Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Mondeer 5-Piece Dining Table Set. Please read all instructions carefully before assembly and use to ensure safe and proper functionality. Keep this manual for future reference.

Important Safety Information

WARNING:

• Exercise caution around sharp edges during assembly and use.
• Do not load more than 57.3 lbs (26 kg) on the tabletop. Exceeding this weight limit may cause damage or injury.
• The product is not heat-resistant. Avoid placing hot items directly on the surface without protection.
• Always follow assembly instructions carefully to prevent injury.
• Keep children away from the assembly area and small parts during assembly.

Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 1 x Dining Table
• 4 x Storage Stools
• 1 x Manual (this document)
• 1 x Installation Tool (Allen wrench/screwdriver)

Setup and Assembly

Assembly is required for this dining set. Detailed written instructions and all necessary tools are included in the package. It is recommended to assemble the product in the room where it will be used.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches.
2. Identify Parts: Refer to the included parts list and diagrams to identify each component.
3. Assemble Table: Follow the step-by-step instructions provided in the separate assembly manual for the dining table. Ensure all screws and fasteners are tightened securely, but do not overtighten.
4. Assemble Stools: Follow the step-by-step instructions provided in the separate assembly manual for each storage stool. Ensure hinges are correctly aligned and secured.
5. Final Check: Once assembled, gently test the stability of the table and stools. Ensure there is no wobbling and all connections are firm.

Image: Diagram illustrating key features of the dining table, including its waterproof and easy-to-clean desktop, increased thickness, internal storage compartment design, and sturdy leg construction.

Image: Diagram detailing the features of the storage stools, highlighting the soft cushion, high-quality hinges for the lift-up lid, the spacious interior storage box, the round clasp for easy opening, and non-slip feet for stability.

Operating Instructions

Using the Dining Table

The dining table is designed for dining, working, or studying. Its compact square design (31.5"x31.5") is ideal for smaller spaces. The table can comfortably accommodate four individuals.

Using the Storage Stools

Each stool features a lift-up lid that reveals an internal storage compartment. To access the storage:

1. Locate the round clasp or handle on the stool lid.
2. Gently lift the lid upwards. The high-quality hinges will support the lid.
3. Place or retrieve items from the oversized storage box.
4. Close the lid securely, ensuring it latches properly.

The stools are designed to tuck completely underneath the table when not in use, optimizing floor space.

Image: The Mondeer 5-Piece Dining Table Set in a room setting, demonstrating how the four stools can be neatly tucked under the table to save space when not in use.

Maintenance and Care

To ensure the longevity and appearance of your dining set, follow these care instructions:

• Cleaning: Wipe surfaces with a damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the engineered wood finish.
• Spills: Clean spills immediately to prevent staining or water damage, especially on the tabletop.
• Heat Protection: As the product is not heat-resistant, always use coasters or placemats for hot dishes and beverages.
• Weight Limits: Adhere to the specified weight limits for the table (110 lbs) and stools (220 lbs per stool) to prevent structural damage.
• Inspection: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.

Troubleshooting

If you encounter any issues with your Mondeer 5-Piece Dining Table Set, refer to the following common solutions:

• Wobbly Table/Stool:
  • Ensure all assembly screws are fully tightened.
  • Check that the product is placed on a level surface.
• Stool Lid Not Closing Properly:
  • Verify that nothing is obstructing the lid's path or the storage compartment.
  • Check the hinges for proper alignment and ensure they are securely fastened.
• Scratches/Minor Damage:
  • For minor scratches, furniture repair pens or touch-up kits designed for engineered wood may be used.

If problems persist, please contact Mondeer customer support for further assistance.

Product Specifications

Image: Visual representation of the dining table and stool dimensions in both centimeters and inches, along with their respective maximum load capacities (110 lbs for the table, 220 lbs for each stool).

Warranty and Customer Support

Warranty Information

Specific warranty details for the Mondeer 5-Piece Dining Table Set may vary. Please refer to the product packaging or the official Mondeer website for the most current warranty policy. Retain your proof of purchase for any warranty claims.

Customer Support

For assistance with assembly, missing parts, or any other product-related inquiries, please contact Mondeer US customer support. You can typically find contact information on the product packaging, the seller's page on the retail platform, or the official Mondeer website.

Online support may be available through the Mondeer Store on Amazon.