1. Introduction
Thank you for choosing the RIENOK S4 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. The RIENOK S4 is a powerful, portable, and waterproof speaker designed for an immersive audio experience, featuring Bluetooth 5.3 connectivity, True Wireless Stereo (TWS) pairing, and a durable, anti-rolling design.

Figure 1: RIENOK S4 Portable Bluetooth Speaker. This image shows the black cylindrical speaker with illuminated ends and control buttons on top, surrounded by water splashes, highlighting its waterproof feature.
2. Package Contents
Please check the package for the following items:
- RIENOK S4 Portable Bluetooth Speaker
- USB Charging Cable
- AUX Audio Cable
- User Manual
3. Product Features
- True Wireless Stereo (TWS) Pairing: Connect two RIENOK S4 speakers simultaneously for an enhanced stereo sound experience.
- Bluetooth 5.3 Connectivity: Ensures a faster, more stable connection with a wide range of Bluetooth-enabled devices.
- AUX Input: Allows connection to non-Bluetooth devices using the included AUX cable.
- IPX7 Waterproof: Designed to withstand splashes, rain, and gentle spray, making it suitable for outdoor and wet environments.
- Anti-Rolling Design: Prevents the speaker from rolling off surfaces, especially during high-volume playback or accidental bumps. Features dynamic LED lights that change with music.
- Portable Design: Compact and lightweight, with a 1800 mAh battery providing up to 10 hours of playtime (at 50% volume).
- SD Card Support: Play music directly from a Micro SD card (not included).
4. Getting Started
4.1 Charging the Speaker
Before first use, fully charge the speaker. Connect the provided USB charging cable to the speaker's charging port and to a USB power adapter (not included) or a computer's USB port. The charging indicator light will show the charging status.
- Charging Time: Approximately 3-4 hours for a full charge.
- Battery Life: Up to 10 hours at 50% volume, or approximately 7 hours at higher volumes.
4.2 Power On/Off
- Power On: Press and hold the Power button for 2-3 seconds until you hear an audible prompt and the LED lights illuminate.
- Power Off: Press and hold the Power button for 2-3 seconds until you hear an audible prompt and the LED lights turn off.
5. Connectivity
5.1 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth pairing mode (the LED indicator will flash).
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "RIENOK S4" from the list of devices.
- Once connected, you will hear a confirmation sound, and the LED indicator will remain solid.
Note: The RIENOK S4 is not compatible with Amazon Echo Alexa devices.
5.2 True Wireless Stereo (TWS) Pairing
To achieve a true stereo sound experience, you can pair two RIENOK S4 speakers together. Ensure both speakers are the same model (RIENOK S4).
- Power on both RIENOK S4 speakers. Do not connect them to any Bluetooth device yet.
- On one of the speakers (this will be the primary speaker), press and hold the TWS button (often indicated by a double-arrow icon or similar) for 2-3 seconds. You will hear a prompt indicating TWS pairing mode.
- The two speakers will automatically search for and connect to each other. Once connected, you will hear a confirmation sound, and the LED indicators on both speakers will synchronize.
- Now, connect your device to the primary speaker via Bluetooth as described in Section 5.1. The audio will play through both speakers in stereo.

Figure 2: Two RIENOK S4 speakers demonstrating True Wireless Stereo (TWS) pairing, positioned next to a smartphone playing music.
5.3 AUX Connection
To connect to devices without Bluetooth functionality:
- Connect one end of the provided 3.5mm AUX audio cable to the AUX-in port on the RIENOK S4 speaker.
- Connect the other end of the AUX cable to the audio output jack of your device (e.g., MP3 player, laptop).
- The speaker will automatically switch to AUX mode, or you may need to press the Mode button (if available) to select AUX input.
5.4 Micro SD Card Playback
Insert a Micro SD card (up to 32GB, not included) with your music files into the designated slot on the speaker. The speaker will automatically detect the card and begin playing music. Use the control buttons to navigate tracks.
6. Operating Instructions
6.1 Button Functions
| Button | Function (Short Press) | Function (Long Press) |
|---|---|---|
| Power Button | N/A | Power On/Off |
| Play/Pause Button | Play/Pause music | Activate voice assistant (if supported by connected device) |
| Volume Down (-) / Previous Track | Decrease volume | Previous track |
| Volume Up (+) / Next Track | Increase volume | Next track |
| Mode Button (M) | Switch between Bluetooth, AUX, and Micro SD card modes | N/A |
| TWS Button | N/A | Enter/Exit TWS pairing mode |
6.2 LED Light Effects
The RIENOK S4 features dynamic LED lights on both ends that change with the rhythm of the music. These lights are an integral part of the speaker's design and enhance the listening experience. There is no specific button to control the light modes mentioned in the product description, implying they operate automatically with music playback.
7. Maintenance and Care
- Cleaning: Wipe the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Water Resistance: While the speaker is IPX7 waterproof, it is designed to withstand splashes and brief immersion (up to 1 meter for 30 minutes). Do not submerge it for extended periods or expose it to high-pressure water jets. Ensure the charging port cover is securely closed before exposing the speaker to water.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use for extended periods.

Figure 3: The RIENOK S4 speaker placed on a wet rock with water droplets, illustrating its IPX7 waterproof capability for outdoor use.
8. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not power on. | Ensure the speaker is charged. Connect it to a power source using the USB cable and try again after a few minutes. |
| Cannot pair via Bluetooth. |
|
| No sound from the speaker. |
|
| TWS pairing failed. |
|
| Sound quality is poor or distorted. |
|
9. Specifications
| Feature | Detail |
|---|---|
| Model Name | Rienok S4 |
| Brand | RIENOK |
| Connectivity Technology | Bluetooth 5.3, Auxiliary |
| Speaker Type | Outdoor, Portable |
| Max Output Power | 5 Watts |
| Battery Capacity | 1800 mAh |
| Battery Life | Up to 10 hours (at 50% volume) / Approx. 7 hours (general use) |
| Waterproof Rating | IPX7 |
| Controller Type | Button |
| Product Dimensions | 7.5D x 7.5W x 9.5H cm (Speaker unit) |
| Weight | 620 grams (Product package weight) |
| Compatible Devices | Smartphone, tablet, laptop, MP3 player |
| Special Features | Stereo Pairing (TWS), Lightweight, Portable, Waterproof, Anti-Rolling Design, LED Lights |
10. Warranty and Support
RIENOK products are designed for reliability and performance. For warranty information, please refer to the warranty card included in your product packaging or visit the official RIENOK website. If you encounter any issues or have questions regarding your RIENOK S4 speaker, please contact RIENOK customer support through the retailer where you purchased the product or via the contact information provided on the official RIENOK website.
Please retain your proof of purchase for warranty claims.

