1. Product Overview
The INKBIRDPLUS Reptile Humidifier is designed to create a comfortable and peaceful environment for various reptiles, amphibians, and wet plants. It features a 3-liter capacity, silent ultrasonic operation, and adjustable mist output. The integrated design minimizes leaks, and the top-filling method simplifies refills.
Image 1.1: INKBIRDPLUS Reptile Humidifier in use with a terrarium, highlighting its features.
Image 1.2: Key features of the INKBIRDPLUS Reptile Humidifier.
Image 1.3: The integrated design of the humidifier prevents leaks and messes.
2. Setup Instructions
2.1 Package Contents
Before beginning installation, ensure all components are present:
- Humidifier Unit (Water Tank and Base)
- Tank Cover
- Mist Maker Float
- Mist Hood
- Maifan Stones (pre-installed for water purification)
- Adjustable Fog Hose (2.2-6 feet / 0.67-1.83 meters)
- 2 Suction Cups
Image 2.1: Exploded view of humidifier components and accessories.
2.2 Assembly Steps
- Check Components: Verify all parts and accessories are received.
- Install Mist Hood: Place the mist hood onto the base of the humidifier.
- Add Water: Fill the water tank from the top. Do not exceed the maximum water level (3L / 0.79 Gal). The optimal water level is 2.2L / 0.58 Gal.
- Connect Hose: Attach the adjustable fog hose to the humidifier's mist outlet.
- Adjust Fog Output: Use the slide switch on the front of the unit to set the desired fog output.
Image 2.2: Step-by-step visual guide for humidifier assembly.
Image 2.3: Demonstrating the convenient top-filling method and water level indicators.
2.3 Hose Installation Guidelines
Proper hose installation is crucial for continuous and smooth fog delivery. Avoid creating bends or dips in the hose where water can collect.
Image 2.4: Guide for correct hose installation to prevent water accumulation and clogging.
Use the provided suction cups to secure the hose in place, ensuring it remains elevated and free of kinks or downward loops.
3. Operation
3.1 Powering On/Off and Mist Adjustment
Plug the humidifier into a suitable power outlet (110 Volts AC). The unit is turned on and off, and the mist output is adjusted using the slide switch on the front panel. Slide the switch to the desired mist level, from minimum to maximum (up to 320 ml/hour).
Image 3.1: Mist output adjustment slide switch.
3.2 Dry Running Protection
The humidifier is equipped with an automatic dry running protection function. If the water level in the tank becomes too low or runs out, the unit will automatically shut off to prevent damage and ensure safety. Refill the water tank to resume operation.
3.3 Water Purification
The Maifan stones included with the humidifier help purify water, contributing to a healthier environment for your pets. Ensure these stones are present during operation.
3.4 Continuous Operation
With a full 3-liter tank, the humidifier can operate continuously for 12-15 hours, depending on the selected mist output level.
3.5 Integration with Humidity Controllers
For precise humidity control, the INKBIRDPLUS Reptile Humidifier can be used in conjunction with an external humidity controller, such as the INKBIRD IHC-200. This allows for automated humidification based on set parameters.
Image 3.2: Humidifier integrated with an external humidity controller for automated environmental management.
4. Maintenance
Regular cleaning and maintenance will ensure optimal performance and longevity of your humidifier.
4.1 Cleaning the Water Tank
- Unplug the humidifier before cleaning.
- Remove the tank cover and mist hood.
- Empty any remaining water from the tank.
- Wipe the inside of the water tank with a soft cloth and mild detergent. Rinse thoroughly to remove all soap residue.
- For mineral buildup, use a solution of white vinegar and water. Let it soak for 15-20 minutes, then scrub gently and rinse well.
- Ensure all parts are completely dry before reassembling.
4.2 Cleaning the Mist Hood and Float
- Gently clean the mist hood and mist maker float with a soft brush or cloth.
- Rinse under running water.
4.3 Maifan Stones
The Maifan stones help purify water. Periodically rinse them under running water to remove any accumulated impurities. Replace them if they show significant wear or discoloration over time (replacement frequency depends on water quality and usage).
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No mist or low mist output |
|
|
| Water leakage |
|
|
| Unusual noise |
|
|
6. Specifications
| Feature | Detail |
|---|---|
| Brand | Inkbird |
| Model Name | INKBIRDPLUS Reptile Humidifier |
| Capacity | 3 Litres |
| Operation Mode | Ultrasonic |
| Max Mist Output | 320 ml/hour |
| Runtime | 12-15 hours (on full tank) |
| Product Dimensions (D x W x H) | 19.5D x 19.5W x 30.5H centimetres |
| Item Weight | 1300 Grams |
| Voltage | 110 Volts (AC) |
| Power Source | Corded Electric |
| Material | Acrylonitrile Butadiene Styrene |
| Special Features | Quiet operation, Dry Running Protection, Adjustable Mist Output, Integrated Design, Water Purification (Maifan Stones) |
7. Warranty & Support
7.1 Warranty Information
This INKBIRDPLUS Reptile Humidifier comes with a One-year Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.
7.2 Customer Support
For technical assistance, warranty claims, or any questions regarding your INKBIRDPLUS Reptile Humidifier, please contact Inkbird customer support. Refer to the product packaging or the official Inkbird website for the most current contact information.
