1. Introduction
Thank you for choosing the AMZCHEF Single Dose Coffee Grinder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new coffee grinder. Please read it thoroughly before first use and retain it for future reference.
2. Important Safety Instructions
- Read all instructions carefully before using the appliance.
- Do not immerse the motor base, cord, or plug in water or other liquids.
- Unplug from the outlet when not in use, before assembling or disassembling parts, and before cleaning.
- Avoid contact with moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
- Ensure the hopper lid is securely in place before operating the grinder.
- This appliance is for household use only.
3. Package Contents
- AMZCHEF Single Dose Coffee Grinder (Model 8306A)
- Vacuum-Sealed Dosing Cup (120g capacity)
- Dosing Funnel Stands (58mm & 51/54mm)
- Magnetic Knock Tool
- Cleaning Brush
- Instruction Manual
4. Product Overview
Familiarize yourself with the components of your AMZCHEF coffee grinder:

- Bean Hopper: Holds whole coffee beans.
- Hopper Lid with Bellows: Seals the hopper and allows for air blowing to clear residual grounds.
- Grind Adjustment Dial: Selects from 75 precise grind settings.
- Start/Cancel Button: Initiates or stops the grinding process.
- Timer Knob: Sets the grinding duration from 5 to 60 seconds.
- Magnetic Spout: Detachable for easy cleaning and low retention.
- Portafilter Holder: Accommodates 51/54mm and 58mm portafilters.
- Vacuum Dosing Cup: For collecting ground coffee and preserving freshness.
- LED Light: Illuminates the grinding area for better visibility.
5. Setup
5.1 Unpacking and Assembly
- Carefully remove all components from the packaging.
- Wash the bean hopper, hopper lid, magnetic spout, and dosing cup with warm, soapy water. Rinse thoroughly and dry completely.
- Place the grinder base on a stable, flat, and dry surface.
- Insert the magnetic spout into its designated slot on the grinder. Ensure it clicks securely into place.
- Attach the bean hopper to the top of the grinder by aligning the arrows and twisting until it locks.
- Place the hopper lid with bellows onto the bean hopper.
5.2 Initial Cleaning
Before first use, it is recommended to run a small amount of old coffee beans through the grinder to season the burrs and remove any manufacturing residue. Discard these initial grounds.
6. Operating Instructions
6.1 Adjusting Grind Settings
The AMZCHEF grinder offers 75 precise grind settings, allowing you to achieve the ideal consistency for various brewing methods. Rotate the grind adjustment dial located on the top of the grinder to select your desired setting. Finer settings are for espresso, while coarser settings are for French press or pour-over.

6.2 Loading Coffee Beans
Open the hopper lid and pour your desired amount of whole coffee beans into the bean hopper. Replace the lid securely.
6.3 Grinding Coffee
- Select your desired grind setting using the adjustment dial.
- Place your portafilter (with the appropriate stand) or the vacuum dosing cup under the magnetic spout.
- Set the desired grinding time using the timer knob (5-60 seconds).
- Press the Start/Cancel button to begin grinding. The integrated LED light will illuminate the grinding area.
- The grinder will automatically stop after the set time. If you need to stop it sooner, press the Start/Cancel button again.

6.4 Using the Vacuum Dosing Cup
The included vacuum-sealed dosing cup helps maintain the freshness of your ground coffee. After grinding into the cup, press down on the lid to create a vacuum seal. This is ideal for storing grounds or for outdoor brewing.

6.5 Anti-Static Technology and Low Retention
The grinder incorporates anti-static technology to prevent coffee grounds from clumping and spraying. The magnetic spout design contributes to ultra-low retention (0.1-0.2g), ensuring you get almost all the coffee you put in. For near-zero retention, use the included knock tool and the bellows on the hopper lid after grinding.

6.6 Official Product Video
Watch this video for a demonstration of the AMZCHEF Single Dose Coffee Grinder in action:
7. Maintenance
7.1 Daily Cleaning
- Unplug the grinder from the power outlet.
- Remove the bean hopper and empty any remaining beans.
- Remove the magnetic spout and clean it with the provided brush or a damp cloth.
- Use the cleaning brush to remove any residual coffee grounds from the grinding chamber and burrs.
- Wipe the exterior of the grinder with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
7.2 Deep Cleaning (Monthly or as needed)
- Unplug the grinder.
- Remove the bean hopper and the upper burr. Refer to the product diagram for burr removal instructions.
- Thoroughly clean both the upper and lower burrs with the cleaning brush. Ensure no coffee oils or grounds remain.
- Clean the grinding chamber thoroughly.
- Reassemble the burrs and hopper, ensuring all parts are securely in place.
Note: The burrs are made of 40mm SUS420 stainless steel for durability and consistent grinding. Proper cleaning ensures their longevity and optimal performance.

8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Grinder does not start. | Not plugged in; Hopper not correctly assembled; Timer not set. | Ensure the power cord is securely plugged in. Check if the hopper is locked into place. Set the timer knob to a desired duration. |
| Grinder stops unexpectedly. | Overheating; Jammed burrs. | Unplug and let cool for 30 minutes. Clean burrs thoroughly to remove any obstructions. |
| Inconsistent grind. | Burrs are dirty or worn; Incorrect grind setting. | Clean the burrs thoroughly. Adjust the grind setting to a finer or coarser level as needed. |
| Excessive static or mess. | Environmental factors; Very dry beans. | Ensure the anti-static feature is working. Lightly mist beans with water before grinding if static persists. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | AMZCHEF |
| Model Name | 8306A |
| Grind Settings | 75 Precise Settings |
| Burr Type | 40mm SUS420 Conical Burr |
| Retention | <0.2g |
| Motor | Quiet DC Motor (60-75dB) |
| Timed Grinding | 5-60 seconds |
| Dosing Cup Capacity | 120g (Vacuum-sealed) |
| Voltage | 120V |
| Product Dimensions | 12 x 8 x 14 inches |
| Item Weight | 6.45 pounds |
10. Warranty and Support
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official AMZCHEF website. Keep your purchase receipt as proof of purchase.