Grimtron Biometric Safe Box User Manual

Introduction

Thank you for choosing the Grimtron Biometric Safe Box. This manual provides essential information for the proper setup, operation, and maintenance of your new safe. Please read it thoroughly before use to ensure optimal performance and security.

Image: The Grimtron Biometric Safe Box, showcasing its open door, interior space, and the biometric keypad with a fingerprint graphic.

Setup

Package Contents

Verify that all items are included in your package:

• Safe x 1
• User Manual x 1
• Key x 2 (Emergency Keys)
• Expansion Screw x 4

Image: A visual representation of the safe's dimensions (16.93"W x 14.57"D x 7.87"H) and its weight (9.9kg/21.83 lbs), alongside the included accessories: two emergency keys, four expansion screws, one user manual, and one USB cable.

Installing Batteries

The safe requires 4 AA batteries (not included) for operation. Follow these steps to install them:

1. After unlocking the safe, locate the battery compartment on the inside of the door.
2. If present, tear off the pouch covering the battery compartment.
3. Use a screwdriver to unscrew the screws on the battery cover.
4. Remove the battery cover.
5. Insert 4 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
6. Replace the battery cover and secure it with the screws.

Important Note:

• Please use alkaline or carbon batteries. Using other types of batteries may render the safe inoperable.
• Do not mix old and new batteries.
• The safe cannot be powered by rechargeable batteries.
• Do not attempt to charge any batteries inside the safe.

Video: A demonstration of how to install the batteries in the Grimtron Biometric Safe Box. It shows opening the safe, removing the battery compartment cover, inserting four AA batteries, and replacing the cover.

Mounting the Safe

Your safe comes with four expansion screws for secure mounting to a wall or floor. This prevents unauthorized removal of the safe.

1. Choose a suitable location for your safe (e.g., wardrobe, bedside, closet, corner).
2. Mark the desired drilling points through the pre-drilled holes on the back or bottom of the safe.
3. Drill holes at the marked points.
4. Align the safe with the drilled holes and secure it using the provided expansion screws.

Image: The Grimtron safe positioned discreetly in a room corner, demonstrating its compact size and versatility for placement.

Image: The Grimtron safe placed within a closet or on an office shelf, highlighting its ability to blend into various home or office environments.

Image: The Grimtron safe neatly stored inside a wardrobe, illustrating its suitability for concealed placement.

Image: The Grimtron safe positioned on a bedside table, demonstrating convenient access for personal items.

Operating Instructions

Unlocking Methods

Your Grimtron safe offers four convenient ways to access your valuables:

Image: A visual guide detailing the four quick access methods for the safe: entering a password, using an emergency key, scanning a fingerprint, and using an external power source with either password or fingerprint.

1. Method 1: Password Access
   Enter your programmed password (3-8 digits) on the keypad, then press "#". Turn the knob clockwise to open.
2. Method 2: Emergency Key Access
   Slide the keyhole cover to the right. Insert the emergency key and turn it clockwise. Turn the knob clockwise to open.
3. Method 3: Biometric (Fingerprint) Access
   Place your registered finger on the fingerprint sensor. Once recognized, turn the knob clockwise to open.
4. Method 4: External Power Access (if batteries are depleted)
   Insert a USB C-type cable into the port on the keypad. You can then unlock the safe using either your password or a registered fingerprint. Turn the knob clockwise to open.

Setting Fingerprints

The safe's high-resolution biometric sensor supports the storage of up to 30 unique fingerprints. The fingerprint response time is less than 0.3 seconds, and unlocking time is less than 1 second. Refer to the detailed instructions in the included user manual for programming your fingerprints.

Image: A detailed view of the safe's fingerprint sensor and keypad, emphasizing its biometric capabilities including storage for up to 30 fingerprints, a low error rate, and a rapid response time.

Setting Passwords

You can set a password ranging from 3 to 8 digits, offering 6.7 million permutations for enhanced security. Refer to the detailed instructions in the included user manual for programming your password.

Image: A close-up of the safe's keypad, featuring a metallic knob and illustrating key functions such as 3-8 digit password input, silent mode operation, and a 5-minute lockout period after multiple failed attempts.

Silent Mode and LED Light

The safe features a backlit keypad for clearer visibility in low light conditions and an internal LED light to illuminate the contents. It also includes a silent mode for the keypad, allowing discreet operation. Instructions for activating/deactivating silent mode can be found in the full user manual.

Image: The interior of the safe, illuminated by an LED light, with a close-up inset showing the battery slot located on the door panel.

Maintenance

Battery Replacement

When the battery indicator on the keypad shows low power, replace all four AA batteries promptly to ensure continuous operation. Follow the 'Installing Batteries' steps in the Setup section.

Cleaning

To clean the exterior of your safe, use a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish. For the keypad and fingerprint sensor, use a dry, lint-free cloth.

Troubleshooting

Specifications

Warranty and Support

Grimtron stands behind the quality of its products. For warranty information, technical support, or any inquiries regarding your Biometric Safe Box, please contact Grimtron's Safety Store directly through their official channels. Refer to the contact information provided with your purchase documentation or visit the Grimtron brand store on Amazon for further assistance.

Grimtron's Safety Store: Visit Store