1. Introduction
Thank you for choosing the LBW Dual-Head Full Spectrum LED Grow Light. This product is designed to provide optimal lighting conditions for your indoor plants, simulating natural sunlight to promote healthy growth at all stages. Please read this manual thoroughly before use to ensure proper operation and longevity of your device.
The LBW Dual-Head Full Spectrum LED Grow Light provides essential light for a variety of indoor plants, ensuring robust growth.
2. Package Contents
Verify that all components listed below are included in your package:
- Grow light panels with Goosenecks (Dual-Head)
- Adapter
- Tripod Stand
- Sling (for alternative mounting)
- User Manual
Contents of the LBW Grow Light package, including the dual-head light, tripod, adapter, and accessories.
3. Setup & Assembly
Follow these steps to assemble your LBW Dual-Head Full Spectrum LED Grow Light:
- Open the Tripod Stand: Carefully unfold the tripod legs to create a stable base. Adjust the height of the tripod to your desired level by loosening the clamps on the central pole, extending the sections, and then tightening the clamps securely.
- Attach the Light Panel: Screw the grow light panel assembly (with goosenecks) onto the top of the tripod stand. Ensure it is firmly attached.
- Connect Power: Plug the adapter into the power cable of the grow light, then plug the adapter into a standard electrical outlet.
- Position the Lights: Adjust the flexible goosenecks to direct the light panels towards your plants as needed.
Step-by-step assembly guide for the LBW Dual-Head Grow Light.
4. Operating Instructions
The LBW Grow Light features an intuitive controller for easy operation:
Timer Function
The built-in timer operates on a 24-hour cycle. Press the timer button to select your desired lighting duration:
- 3H: Light stays on for 3 hours, then off for 21 hours.
- 6H: Light stays on for 6 hours, then off for 18 hours.
- 12H: Light stays on for 12 hours, then off for 12 hours.
The light will automatically turn on and off at the same time each day according to your setting.
Brightness Levels
Adjust the light intensity to suit different plant growth stages with six dimmable levels:
- 10%
- 20%
- 40%
- 60%
- 80%
- 100%
Switch Modes
Control which light panels are active:
- Left Light ON: Activates only the left light panel.
- Right Light ON: Activates only the right light panel.
- Both ON: Activates both light panels for maximum coverage.
The controller allows for easy adjustment of timer, brightness, and lighting modes.
Illustrates the various dimming levels and switch modes available.
5. Product Features
Superior Full Spectrum Lighting
Each light panel is equipped with 214 high-efficiency LED chips, including cold white (6000K), warm white (3500K), red (630-660nm), UV (395nm), and IR (730nm) LEDs. This combination perfectly simulates natural sunlight, providing the optimal spectrum for photosynthesis and promoting robust plant growth.
Efficient Heat Dissipation
The lamp head features a unique design with specially reserved holes in the back plate for effective heat dissipation, preventing overheating during prolonged use.
Adjustable Height & Flexible Goosenecks
The included 1.5m tripod allows for height adjustment between 27.8 inches and 74.8 inches, accommodating plants of various sizes. The flexible goosenecks provide 360° rotatable illumination, allowing you to direct light precisely where needed.
Illustration of the full spectrum LED configuration for optimal plant growth.
Key features including dimensions, adjustable height, and flexible goosenecks.
The grow light's height can be adjusted from 27.8 inches to 74.8 inches.
6. Maintenance
- Cleaning: Ensure the grow light is unplugged before cleaning. Gently wipe the LED panels and the stand with a soft, dry cloth to remove dust and debris. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use for extended periods, unplug the light, collapse the tripod, and store all components in a cool, dry place away from direct sunlight.
- Inspection: Periodically check the power cord and connections for any signs of damage. If any damage is found, discontinue use and contact customer support.
7. Troubleshooting
- Light Not Turning On:
- Ensure the power adapter is securely plugged into both the light and the wall outlet.
- Check if the wall outlet is functional by plugging in another device.
- Verify that the power button on the controller is pressed.
- Timer Not Functioning Correctly:
- Ensure you have selected one of the 3H, 6H, or 12H timer settings. The timer operates on a 24-hour cycle, so it will activate at the same time each day after initial setup.
- If the timer is interrupted (e.g., power outage), you may need to reset your desired timer duration.
- Lights Flickering or Dim:
- Check the brightness level setting on the controller.
- Ensure the power supply is stable and not experiencing fluctuations.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | Dual-head Plastic Grow Light with Stand (A0107) |
| Light Source Type | LED |
| Number of Light Sources | 428 |
| Wattage | 26 watts |
| Voltage | 24 Volts |
| Special Feature | Dimmable, Full Spectrum |
| Control Method | Remote (Integrated Controller) |
| Timer Settings | 3/6/12H (24H cycle) |
| Brightness Levels | 6 |
| Height Adjustable | 27.8 - 74.8 inches |
| Material | Aluminum, Plastic |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 3.61 pounds |
9. Warranty & Support
LBW is committed to customer satisfaction. Your LBW Grow Light comes with:
- 12 Months Warranty: Covers manufacturing defects and malfunctions under normal use.
- 30 Days Satisfaction Guarantee: If you are not completely satisfied, you may return the product for a full refund within 30 days of purchase.
For any questions or concerns regarding your LBW Grow Light, please contact our dedicated support team. We are always ready to assist you.
