Audibax Onyx 200 Multifunction Equipment Stand User Manual

Introduction

The Audibax Onyx 200 is a versatile and robust stand designed to support a wide range of musical and electronic equipment. Its adjustable height and stable construction make it suitable for keyboards, MIDI controllers, DJ mixers, laptops, and rack synthesizers. This manual provides essential information for safe assembly, operation, and maintenance of your stand.

Image Description: A front view of the Audibax Onyx 200 multifunction equipment stand, showcasing its black finish and X-frame design, ready for use.

Safety Information

• Ensure all components are securely fastened before placing any equipment on the stand.
• Do not exceed the maximum load capacity of 20 kg (44 lbs).
• Place the stand on a flat, stable surface to prevent tipping.
• Keep hands clear of moving parts during height adjustment.
• Regularly inspect the stand for any signs of wear or damage. Do not use if damaged.

Package Contents

Please verify that all the following components are included in your package:

• Audibax Onyx 200 Stand Frame (X-shaped base)
• Equipment Platform (top surface with ventilation slots)
• Adjustment Lever and Locking Clutch Mechanism
• Rubber Sleeves/Feet for stability

Setup and Assembly

1. Unfold the Stand Frame: Carefully unfold the X-shaped base of the stand until it forms a stable structure.
2. Attach the Equipment Platform: Place the equipment platform onto the upper arms of the stand frame. Ensure it is centered and securely seated. The platform features pre-drilled holes for ventilation and potential mounting, though specific mounting hardware is not included.
3. Adjust Height: Refer to the "Height Adjustment" section for detailed instructions on setting the desired height.
4. Ensure Stability: Verify that the stand is stable and all rubber sleeves/feet are making full contact with the floor. The adjustable rubber sleeves help compensate for uneven surfaces.

Image Description: A diagram illustrating the Audibax Onyx 200 stand. It highlights key dimensions such as adjustable height (330mm-980mm), upper arms depth (325mm), lower arms depth (450mm), and tube diameter (25mm). The diagram also indicates the material as steel and the maximum load capacity as 20 kg.

Height Adjustment

The Audibax Onyx 200 stand offers multiple height settings for ergonomic use. Follow these steps to adjust the stand's height:

1. Locate the Adjustment Mechanism: Find the spring-loaded lever and locking clutch at the center joint of the X-frame.
2. Release the Lock: Gently pull the lever to disengage the locking pin from its current position.
3. Adjust Height: While holding the lever, carefully raise or lower the stand to your desired height. The stand has predefined positions (e.g., 95.5 cm, 90.5 cm, 82 cm, 71.5 cm).
4. Secure the Lock: Once the desired height is reached, release the lever, ensuring the locking pin fully engages into one of the adjustment holes. A click sound confirms engagement.
5. Verify Stability: Before placing equipment, gently shake the stand to confirm it is locked securely at the chosen height.

Image Description: A close-up view of the central pivot point of the Audibax Onyx 200 stand, showing the height adjustment mechanism. Numbered positions (1 through 7) are visible around the locking clutch, indicating the various height settings.

Operating Instructions

The Audibax Onyx 200 is designed for versatile use with various equipment. Follow these guidelines for optimal performance:

• Placement of Equipment: Carefully place your keyboard, MIDI controller, DJ mixer, laptop, or other compatible equipment onto the stand's platform. Ensure the weight is evenly distributed.
• Ventilation: The platform features integrated slots to facilitate airflow, helping to maintain adequate temperature for your equipment during extended use. Position your devices to benefit from these ventilation openings.
• Cable Management: While the stand does not include dedicated cable management, consider using external cable ties or clips to keep cables tidy and prevent tripping hazards.

Image Description: The Audibax Onyx 200 multifunction stand shown with a black electronic keyboard placed securely on its platform, demonstrating its use as a keyboard stand.

Image Description: The Audibax Onyx 200 stand in a studio setting, supporting a DJ mixer and a pair of headphones. The image highlights the stand's versatility for various audio equipment.

Image Description: A close-up view of a DJ mixer and headphones placed on the Audibax Onyx 200 stand's platform, clearly showing the integrated ventilation slots designed to prevent overheating.

Maintenance

• Cleaning: Wipe the stand with a soft, damp cloth to remove dust and dirt. Avoid abrasive cleaners or solvents that could damage the finish.
• Inspection: Periodically check all joints, bolts, and the adjustment mechanism for tightness and proper function. Ensure the rubber feet are intact and provide adequate grip.
• Storage: When not in use, the stand can be folded for compact storage. Store in a dry environment away from extreme temperatures.

Troubleshooting

Issue: Stand feels unstable or wobbly.

Solution:

• Ensure the stand is placed on a completely flat and level surface.
• Check that the height adjustment locking pin is fully engaged in one of the designated holes.
• Verify that all rubber feet are making firm contact with the floor. Adjust the feet if necessary to compensate for minor unevenness.
• Confirm that the equipment placed on the platform is centered and its weight does not exceed the 20 kg load capacity.

Issue: Difficulty adjusting height.

Solution:

• Ensure the spring-loaded lever is fully pulled to disengage the locking pin.
• Check for any obstructions or debris in the adjustment holes or around the locking mechanism.
• Apply a small amount of silicone lubricant to the moving parts of the adjustment mechanism if it feels stiff.

Specifications

Warranty and Support

For warranty information, technical support, or service inquiries, please contact Audibax customer service through their official website or the retailer where the product was purchased. Please have your model number (Onyx 200 / 10268542) and purchase date available when contacting support.