Hurom H320 Slow Juicer Instruction Manual

1. Introduction to Your Hurom H320 Slow Juicer

The Hurom H320 Slow Juicer is designed to extract maximum nutrients and flavor from fruits and vegetables through its patented Slow Squeeze Technology. This masticating juicer minimizes oxidation, providing fresh, nutrient-rich juice with ultra-low pulp. Its self-feeding hopper and quiet motor make daily juicing convenient and efficient.

Figure 1: Front view of the Hurom H320 Slow Juicer.

Figure 2: The Hurom H320, a product of 40 years of research in slow juicing technology.

2. Setup and Assembly

Before first use, ensure all parts are clean. The Hurom H320 is designed for easy assembly. Follow these steps to set up your juicer:

1. Place the motor body on a stable, flat surface.
2. Insert the inner strainer (fine or coarse, depending on desired pulp level) into the outer strainer.
3. Place the assembled strainer set into the juicing chamber.
4. Insert the auger into the center of the strainer assembly, ensuring it is seated correctly.
5. Attach the self-feeding hopper onto the top of the juicing chamber, aligning the arrows and twisting to lock it into place.
6. Connect the juicing chamber assembly onto the motor body, aligning the arrows and twisting until it clicks securely.
7. Place the pulp container under the pulp chute and the juice container under the juice spout.
8. Plug the power cord into a grounded electrical outlet.

Figure 3: Exploded view of the Hurom H320 components for assembly.

For a visual guide, refer to the user manual PDF available on the product page. Instructional videos demonstrating assembly are also commonly available from various sources.

3. Operating Instructions

The Hurom H320 is designed for hands-free operation, allowing you to prepare large batches of juice with minimal effort.

3.1 Preparing Produce

• Wash all fruits and vegetables thoroughly.
• For most produce, pre-cutting is not necessary due to the large self-feeding hopper. Whole apples, carrots, and other similar-sized items can be added directly.
• Remove hard seeds (e.g., from mangoes, peaches) and tough stems (e.g., from apples) to prevent damage to the juicer and ensure smooth operation.
• For fibrous vegetables like celery, it is recommended to cut them into shorter (e.g., 1-inch) pieces to prevent stringing and optimize juice extraction.

Figure 4: The large self-feeding chamber accommodates whole produce, reducing prep time.

3.2 Juicing Process

1. Ensure the juice spout cap is closed before starting.
2. Turn the juicer ON using the control dial.
3. Place prepared produce into the self-feeding hopper. The auger will automatically draw the produce down and begin the slow squeeze process.
4. Monitor the juice and pulp containers. The juicer is designed for high yield, producing dry pulp and rich juice.
5. If the juicer becomes jammed or struggles, use the 'REV' (Reverse) function briefly to dislodge the produce, then switch back to 'ON'.
6. Once juicing is complete, open the juice spout cap to dispense the juice into your container.

Figure 5: The juicer's high yield design ensures maximum juice extraction and minimal waste.

4. Maintenance and Cleaning

Regular cleaning is essential for maintaining the performance and longevity of your Hurom H320. All removable parts should be hand washed with lukewarm water and mild dish soap.

4.1 Disassembly for Cleaning

1. Ensure the juicer is turned OFF and unplugged from the power outlet.
2. Remove the self-feeding hopper by twisting and lifting.
3. Remove the juicing chamber assembly from the motor body.
4. Disassemble the auger, strainers, and juicing chamber.
5. Open the pulp outlet cap to remove any remaining pulp.

4.2 Cleaning Process

• Rinse all disassembled parts under running water to remove large pulp residues.
• Use the provided cleaning brush to scrub the mesh strainer thoroughly. The brush has different ends for various cleaning needs.
• Wash all other parts (auger, chamber, hopper, containers) with warm, soapy water.
• Rinse all parts completely to remove soap residue.
• Allow all parts to air dry completely before reassembling or storing.

Important: Do not wash any parts in a dishwasher, as this can damage the materials and affect the juicer's performance and lifespan.

5. Troubleshooting

6. Specifications

7. Warranty and Support

For detailed warranty information, please refer to the official Hurom website or the warranty card included with your product. Hurom offers various protection plans for extended coverage.

A comprehensive User Manual in PDF format is available for download: Hurom H320 User Manual (PDF).

For further assistance, technical support, or spare parts, please visit the official Hurom America store or contact their customer service directly. You can find more information at the Hurom Store on Amazon.