1. Important Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Caution: Be cautious of sharp edges during assembly and use.
- Weight Limit: Do not exceed the maximum weight limit of 800 pounds (including mattress and occupants).
- Assembly: Assembly requires two adults. Ensure all components are securely fastened before use.
- Placement: Place the bed frame on a level surface.
- Electrical Safety: For LED lights, ensure the power source is appropriate and avoid exposing electrical components to moisture.
2. Package Contents
Verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Headboard (with integrated LED light strip)
- Footboard
- Side Rails
- Metal Slat Support System
- Center Support Bars and Legs
- Assembly Hardware (screws, bolts, washers, Allen wrench)
- LED Light Remote Control
- Instruction Manual
3. Setup and Assembly Instructions
This bed frame is designed for straightforward assembly. Refer to the detailed step-by-step instructions included in your product packaging for specific diagrams and hardware identification. Assembly typically takes approximately 45 minutes for two adults.
General Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Attach Side Rails: Connect the side rails to the headboard and footboard using the provided hardware. Ensure all connections are secure.
- Install Center Support: Assemble and attach the center support bar(s) and legs to the bed frame.
- Place Slats: Position the metal slats across the bed frame and secure them according to the instructions. Ensure the noise-free strips are correctly applied to prevent squeaking.
- Connect LED Lights: Connect the LED light strip power cable to the appropriate power source as indicated in the LED light instructions.
- Final Check: Double-check all bolts and screws to ensure they are tightened.
Mattress Recommendation: This bed frame is designed for mattresses with a height of 8 to 12 inches. No box spring is needed.
4. Operating Instructions (LED Light Headboard)
The integrated RGB LED light strip in the headboard offers various lighting options to enhance your bedroom ambiance. The lights can be controlled via a remote control or a dedicated mobile application.
LED Light Features:
- 60,000 Colors: Choose from a wide spectrum of colors.
- Mode Switch: Cycle through various lighting modes (e.g., static, fading, flashing).
- Brightness Adjustable: Adjust the intensity of the light.
- Time Schedule: Set timers for the lights to turn on or off.
- Mic Mode: Lights react to ambient sounds.
- Music Mode: Lights synchronize with music playback.
Using the Remote Control:
Point the remote control directly at the LED receiver on the bed frame. Use the buttons to power on/off, change colors, adjust brightness, and select modes.
Using the Mobile Application:
Download the specified mobile application (refer to the LED light instructions for app name and QR code). Follow the in-app instructions to pair your device with the LED lights for advanced control features.
5. Maintenance
Regular maintenance will help prolong the life and appearance of your bed frame.
- Cleaning: Wipe the metal frame with a soft, damp cloth. For the rattan surfaces, use a soft brush or cloth to gently remove dust. Avoid harsh chemicals or abrasive cleaners.
- Fasteners: Periodically check all bolts and screws and tighten them as needed to maintain stability and prevent wobbling or squeaking.
- Rattan Care: The PE rattan cane is durable and smooth. Avoid excessive moisture or direct prolonged sunlight exposure to maintain its integrity.
- LED Lights: Ensure the LED light strip and its connections are free from dust and debris. Do not attempt to repair or modify the LED strip yourself.
6. Troubleshooting
Refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame squeaks or wobbles | Loose fasteners; improper assembly; lack of noise-free strips. | Tighten all bolts and screws. Ensure noise-free strips are correctly installed on the slats. Reinforce the headboard with additional screws if necessary (as per assembly instructions). |
| Mattress slides on the frame | Mattress not properly seated; anti-slip features not effective. | Ensure the mattress is fully seated within the embedded design of the frame. Verify that the anti-slip design elements are intact. |
| LED lights not working | Power connection issue; remote control battery dead; LED strip malfunction. | Check power connections. Replace remote control batteries. If issues persist, contact customer support. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | RAP2 |
| Size | Queen |
| Product Dimensions (L x W x H) | 81.6" x 62.4" x 42.9" |
| Color | Led Rattan Black |
| Material | Metal, PE Rattan Cane |
| Headboard Material | Rattan |
| Special Features | No Box Spring Needed, Rattan Headboard with LED Light, Squeak Resistant |
| Compatible Mattress Size | Queen |
| Ground to Item Distance | 11 Inches (under-bed clearance) |
| Item Weight | 57.3 pounds |
| Maximum Weight Capacity | 800 pounds |
| Assembly Required | Yes |
| UPC | 196336823687 |
8. Warranty Information
For specific warranty details regarding your GAOMON Queen Size Rattan Platform Bed Frame, please refer to the warranty card included with your product or contact GAOMON customer support directly. Warranty terms and conditions may vary.
9. Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact GAOMON customer support. Contact information can typically be found on the product packaging or the official GAOMON website.
