1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your VOVO STYLEMENT TCB-8200SA Smart Toilet. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
Image 1.1: VOVO STYLEMENT TCB-8200SA Smart Toilet, a modern elongated one-piece toilet with integrated bidet functions.
2. Safety Information
Observe all safety warnings and instructions to prevent injury or damage. This appliance is for household use only.
- Ensure the power outlet is a 120-volt grounded outlet.
- Do not immerse the product in water or spray water directly onto electrical components.
- Unplug the unit before cleaning or performing any maintenance.
- Do not attempt to repair the unit yourself. Contact qualified service personnel.
- Keep children and individuals with reduced physical, sensory, or mental capabilities away from the unit unless supervised.
3. Product Features
The VOVO STYLEMENT TCB-8200SA Smart Toilet offers a range of advanced features for enhanced comfort and hygiene:
- Auto Open/Close Lid: Motion sensor activated lid for hands-free operation.
- Auto Flushing: Differentiates between large and small flushes based on seated time, using 1.12 GPF (for 35 PSI).
- Heated Seat: Adjustable heated seat for comfort, especially in colder environments.
- Warm Dryer & Water: Water heating system and built-in air dryer with 3 adjustable temperatures.
- Auto Deodorization: Automatic deodorizer to remove unpleasant odors.
- UV LED Sterilization: Built-in UV sterilizer for the nozzle and bowl, providing disinfection.
- 3-in-1 Full Stainless Steel Nozzle: Offers Posterior, Feminine, and Turbo Wash functions.
- Self-Cleaning Nozzle: The nozzle automatically cleans itself before and after each use.
- Blackout Manual Flushing: Manual flush buttons on the side for use during power outages.
- Sleek and Acrylic Design: Modern, tankless design with a luxurious acrylic remote controller.
4. Installation Guide
Professional installation is recommended. Ensure all local plumbing and electrical codes are followed. Before beginning, verify the product dimensions and required clearances.
4.1 Pre-Installation Check
Confirm that the product dimensions fit your bathroom space and plumbing rough-in. A 120-volt outlet is required, and the power cord length is 1.2M (4ft).
Image 4.1: Product dimensions (19 x 31 x 29 inches) and 12-inch rough-in requirement. A 120-volt outlet is necessary.
4.2 Installation Steps
- Prepare the Floor Flange: Ensure the floor flange is properly installed and secure. Place the toilet over the floor bolts.
- Connect the Seat Unit: Carefully align and connect the smart seat unit to the toilet bowl. Ensure all connections are secure.
- Connect Water Supply: Connect the water supply line to the toilet's inlet valve. Ensure a tight, leak-free connection. Turn on the water supply slowly and check for leaks.
- Connect Power: Plug the power cord into a grounded 120-volt electrical outlet.
Image 4.2: Aligning the toilet with the floor bolts for secure placement.
Image 4.3: Securing the smart seat unit to the toilet bowl.
Image 4.4: Connecting the water line to the toilet's inlet valve.
Image 4.5: Plugging the toilet into a standard electrical outlet.
5. Operating Instructions
The VOVO STYLEMENT TCB-8200SA is operated primarily via its remote control. Familiarize yourself with the remote's functions for optimal use.
Image 5.1: Overview of the remote control buttons and their corresponding functions.
5.1 Remote Control Functions
- Full Flush: Press the "Full Flush" button for a large flush.
- Small Flush: Press the "Small Flush" button for a small flush.
- Cover Open/Close: Controls the automatic opening and closing of the lid.
- Posterior: Activates the posterior wash function.
- Feminine: Activates the feminine wash function.
- Turbo Wash: Initiates a powerful wash. Water pressure starts at level 1 and can be adjusted during operation.
- Dryer: Activates the warm air dryer after wash functions.
- Position/Pressure/Dry: Use the +/- buttons to adjust nozzle position, water pressure, or dryer temperature/intensity.
5.2 Manual Flushing (Power Outage)
In case of a power outage, locate the manual flush buttons on the side of the toilet. Press the appropriate button for a flush or rim wash.
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your smart toilet.
- Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth and mild, non-abrasive cleaner. Avoid harsh chemicals.
- Nozzle Cleaning: The nozzle has a self-cleaning function. For deeper cleaning, refer to the remote control for manual nozzle extension and clean with a soft brush.
- Bowl Cleaning: Use standard toilet bowl cleaners. Ensure the UV sterilization function is active for continuous hygiene.
- Filter Maintenance: Periodically check the water filter (if installed) for sediment buildup and clean or replace as necessary to maintain water pressure.
- Power Disconnection: Always unplug the unit from the power outlet before performing any extensive cleaning or maintenance.
7. Troubleshooting
If you encounter issues with your smart toilet, refer to the following common problems and solutions. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power / Unit unresponsive | Power cord unplugged, circuit breaker tripped, remote batteries low. | Check power connection, reset breaker, replace remote batteries (3 AA batteries required). |
| Water spray not working or weak | Water supply valve closed, water filter clogged, low water pressure. | Ensure water supply valve is fully open. Clean or replace water filter. Check household water pressure. |
| Lid not opening/closing automatically | Motion sensor obstructed or dirty, sensor malfunction. | Clean the motion sensor area. If issue persists, contact support. |
| Heated seat not warming | Heated seat function off, temperature setting too low. | Activate heated seat function via remote. Adjust temperature setting higher. |
| Unpleasant odors persist | Deodorizer filter needs cleaning/replacement, severe odor source. | Ensure deodorizer is active. Clean the toilet thoroughly. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | TCB-8200SA |
| Brand | VOVO |
| Color | White |
| Material | Stainless Steel (Nozzle), Polypropylene (Seat) |
| Installation Type | Floor Mounted |
| Shape | Elongated (Oblong) |
| Item Weight | 109.8 pounds |
| Product Dimensions | 19 x 31 x 29 inches |
| Flush Volume | 1.12 GPF |
| Power Requirement | 120-volt outlet |
| Batteries (Remote) | 3 AA batteries (included) |
| UPC | 850056923224 |
9. Warranty and Support
VOVO provides customer support and warranty services for its products. For specific warranty details, please refer to the warranty card included with your product or visit the official VOVO website.
- Protection Plans: Additional protection plans may be available for purchase, such as 4-Year Protection Plans.
- Customer Service: For technical assistance, troubleshooting, or warranty claims, please contact VOVO USA customer support.
- Contact Information: Refer to your product packaging or the official VOVO website for the most current customer support contact details.
