1. Introduction
Welcome to your new Lindby Josefin LED Floor Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your lamp. Please read these instructions carefully before use and retain them for future reference.
Image 1.1: The Lindby Josefin LED Floor Lamp illuminating a modern living space.
2. Important Safety Instructions
To ensure safe operation and prevent damage, please observe the following safety guidelines:
- Always disconnect the lamp from the power supply before cleaning or performing any maintenance.
- This lamp is designed for indoor use only (IP20). Do not expose it to moisture or extreme temperatures.
- Ensure the lamp is placed on a stable, level surface to prevent tipping.
- Do not attempt to modify or repair the lamp yourself. Contact qualified personnel for service.
- Keep packaging materials, especially plastic bags, away from children.
- The integrated LED light sources are not user-replaceable. Do not attempt to remove or replace them.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. The package should contain:
- Lindby Josefin LED Floor Lamp (unassembled sections)
- Integrated LED light sources (uplighter and reading lamp)
- Instruction Manual
4. Setup and Assembly
Follow these steps to assemble your Lindby Josefin LED Floor Lamp:
- Carefully remove all components from the packaging. Place them on a soft, clean surface to prevent scratches.
- Attach the base to the lowest pole section. Ensure it is securely fastened by rotating clockwise until tight.
- Connect the remaining pole sections by screwing them together. Be careful not to cross-thread the connections. Ensure the internal wiring is not pinched during assembly.
- Once all pole sections are assembled, ensure the lamp stands upright and stable.
- Plug the power cord into a suitable electrical outlet (230V).
Image 4.1: The robust base of the Lindby Josefin LED Floor Lamp, ensuring stability.
5. Operating Instructions
The Lindby Josefin LED Floor Lamp features an uplighter and a flexible reading lamp, both with separate controls and dimming functionality.
- Main Uplighter Control: Locate the rotary switch on the lamp's pole. Rotate it clockwise to turn on the uplighter and increase brightness. Rotate counter-clockwise to dim the light and turn it off.
- Reading Lamp Control: Below the main uplighter control, there is a separate switch for the reading lamp. Use this switch to turn the reading lamp on or off. The reading lamp also has its own dimming function, typically controlled by rotating its switch.
- Adjusting the Reading Lamp: The reading lamp is mounted on a flexible arm, allowing you to adjust its position and direct the light as needed.
Image 5.1: The dual rotary switches for independent control of the uplighter and reading lamp.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp.
- Cleaning: Before cleaning, always unplug the lamp from the power outlet. Use a soft, dry cloth to wipe the lamp's surface. Do not use abrasive cleaners, solvents, or liquids, as these can damage the finish.
- Light Source: The Lindby Josefin LED Floor Lamp features integrated LED light sources. These LEDs are designed for a long lifespan and are not user-replaceable. Do not attempt to open the lamp heads or replace the LEDs.
7. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply. Lamp not properly plugged in. Switch is off. | Check if the power cord is securely plugged into a working outlet. Ensure the wall switch (if any) is on. Rotate the lamp's switch to the 'on' position. |
| Light is too dim or too bright. | Dimmer setting is incorrect. | Adjust the rotary dimmer switch to achieve the desired brightness level. Remember the uplighter and reading lamp have separate dimmers. |
| Reading lamp not working. | Reading lamp switch is off. | Ensure the reading lamp's dedicated switch is turned on. |
| Lamp flickers. | Unstable power supply. Loose connection. | Try plugging the lamp into a different outlet. Ensure all assembled sections are tightly screwed. If flickering persists, discontinue use and contact support. |
If these solutions do not resolve the issue, please contact customer support.
8. Specifications
Detailed technical specifications for the Lindby Josefin LED Floor Lamp:
| Feature | Detail |
|---|---|
| Model Number | 10017423 |
| Brand | Lindby |
| Manufacturer | Lampenwelt |
| Dimensions (H x W x D) | 180 cm x 25.4 cm x 25.4 cm |
| Base Diameter | 25.4 cm |
| Weight | 6 kg |
| Material | Metal |
| Color | Bronze, Frosted White |
| Light Source Type | Integrated LED (2 lamps) |
| Total Wattage | 17 W (Uplighter) + 5 W (Reading Lamp) |
| Luminous Flux | 2510 Lumen |
| Voltage | 230 V |
| Protection Class | IP20 (Indoor Use) |
| Special Features | Dimmer, Reading Light, Energy-saving |
Image 8.1: Dimensional drawing of the Lindby Josefin LED Floor Lamp, showing height and base diameter.
9. Warranty and Support
Your Lindby Josefin LED Floor Lamp is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Lindby website for detailed warranty terms and conditions.
For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts (if applicable), please contact your retailer or the manufacturer directly. Have your model number (10017423) and purchase date ready when contacting support.
