1. Introduction
This manual provides comprehensive instructions for the EMKE LED Bathroom Mirror, Model ULM03GKDQS. This mirror integrates multiple features including LED lighting with adjustable color tones and blue ambient light, a Bluetooth speaker, a shaver socket, and an anti-fog function. Please read these instructions carefully before installation and use to ensure safe and optimal performance.
Image 1.1: The EMKE LED Bathroom Mirror with its blue ambient lighting activated, positioned above a modern sink.
2. Safety Information
- Ensure the power supply is disconnected before installation or maintenance.
- Installation should be performed by a qualified electrician to comply with local wiring regulations.
- Do not expose the mirror to excessive moisture or direct water spray beyond its intended bathroom use.
- The mirror is designed for indoor use only.
- The integrated fuse protects the mirror and electrical system from malfunctions. Do not bypass or modify it.
3. Installation
3.1 Pre-Installation Checks
- Measure Installation Space: Before purchasing and installing, carefully measure the intended installation area to ensure the mirror (450 x 600 mm) fits correctly.
- Power Supply: Ensure a suitable electrical connection is available at the installation site. The mirror is hardwired.
- Wall Preparation: The wall must be capable of supporting the mirror's weight (approximately 5.1 kg).
Image 3.1: Diagram illustrating the mirror's dimensions (450x600mm) and indicating a hardwired electrical connection.
3.2 Mounting the Mirror
- Marking: Use a pencil to mark the desired mounting points on the wall, ensuring the mirror will be level. The mirror can be hung horizontally or vertically.
- Drilling: Drill holes at the marked points suitable for the mounting hardware (not specified in input, assume standard wall plugs and screws).
- Cable Management: Be aware that the mirror's design may have a shallow recess for wiring. It may be necessary to create grooves in the wall surface to accommodate connectors and cables, ensuring they are flush with the wall for a secure and stable fit.
- Secure Mounting: Attach the mirror securely to the wall using appropriate fasteners.
3.3 Electrical Connection
- Wiring: Connect the mirror's electrical wires to the main power supply according to local electrical codes. Ensure correct polarity (Live, Neutral, Earth).
- Fuse Protection: The mirror includes fuse protection. Do not remove or tamper with this safety feature.
- Testing: Once installed, restore power and test all mirror functions.
4. Operating Instructions
The EMKE LED Bathroom Mirror features intuitive touch controls for its various functions.
Image 4.1: Detail of the smart touch controls on the mirror, indicating functions for light, Bluetooth, and demister.
4.1 Lighting Control
- Power On/Off: Touch the light switch icon on the mirror to turn the LED lights on or off.
- Color Temperature Adjustment: With the lights on, repeatedly touch the light switch icon to cycle through three color tones: blue ambient light, cool white, and warm white.
- Dimming Function: Press and hold the light switch icon to adjust the brightness (dimmable function). Release when the desired brightness is achieved.
- Memory Function: The mirror retains the last used brightness and color temperature settings for up to 3 hours after being powered off.
Image 4.2: The mirror displaying both its blue ambient light and a brighter white light setting, highlighting the adjustable lighting options.
4.2 Bluetooth Speaker
- Activation: Touch the Bluetooth icon on the mirror to activate the speaker. A confirmation sound may indicate it's ready for pairing.
- Pairing: On your mobile device, search for Bluetooth devices and select "EMKE Mirror" (or similar name). Pair the devices.
- Audio Playback: Once paired, you can play audio from your device through the mirror's integrated 360° surround sound speaker.
Image 4.3: A smartphone displaying a music player interface, with a Bluetooth symbol indicating connection to the mirror's speaker.
4.3 Anti-Fog Function
- Activation: Touch the demister icon on the mirror to activate the anti-fog heating pad.
- Operation: The heating pad (200 x 300 mm) will warm the mirror surface to prevent condensation, providing a clear reflection after showering.
- Deactivation: Touch the demister icon again to turn off the anti-fog function. It is recommended to turn off the demister when not needed to optimize energy consumption.
Image 4.4: A mirror partially covered in steam, with a clear section illustrating the effectiveness of the anti-fog feature.
4.4 Shaver Socket
- Usage: The mirror includes a dedicated shaver socket for charging electric razors, toothbrushes, and other low-power 2-pin devices.
- Location: The shaver socket is typically located on the side of the mirror frame.
- Safety: Ensure devices are compatible with the socket's voltage and current ratings.
Image 4.5: A close-up of the shaver socket integrated into the mirror's frame, with an electric razor and toothbrush shown nearby.
5. Maintenance
- Cleaning: Clean the mirror surface with a soft, damp cloth and a mild glass cleaner. Avoid abrasive cleaners or harsh chemicals that could damage the mirror or its components.
- Electrical Components: Do not attempt to clean or service internal electrical components.
- Fuse Replacement: If the fuse blows, replace it with an identical type and rating. Consult a qualified electrician if unsure.
- General Care: Regularly inspect the mirror for any signs of damage or wear.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights not turning on | No power supply; loose connection; blown fuse. | Check power supply; ensure connections are secure; check and replace fuse if necessary (consult electrician). |
| Anti-fog not working | Function not activated; heating element malfunction. | Ensure demister icon is touched; contact customer support if issue persists. |
| Bluetooth not pairing | Mirror's Bluetooth not activated; device too far; already paired with another device. | Ensure Bluetooth icon is touched; bring device closer; disconnect from other devices and try again. |
| Shaver socket not working | No power; device incompatibility. | Check mirror's main power; ensure device is 2-pin and low power. |
7. Specifications
| Brand: | EMKE |
| Model Number: | ULM03GKDQS |
| Dimensions: | 450 x 600 mm |
| Weight: | 5.1 kg |
| Material: | Glass |
| Mounting Type: | Wall Mount (Horizontal or Vertical) |
| Special Features: | Illuminated, Bluetooth Speaker, Shaver Socket, Blue Ambient Light, Dimmable, Memory Function, Anti-fog |
| Anti-fog Pad Size: | 200 x 300 mm |
| Power: | Hardwired |
8. Customer Support
For any queries, technical assistance, or support regarding your EMKE LED Bathroom Mirror, please contact our customer service team. We are committed to ensuring your satisfaction.
Image 8.1: A customer service representative ready to assist with product inquiries.
Please refer to your purchase documentation for specific contact details or visit the official EMKE website.
