Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Hunter 52612 Skyflow Outdoor Ceiling Fan. Designed for outdoor environments, this fan features WeatherMax construction for durability against corrosion and a SureSpeed motor for high-speed cooling. Please read all instructions carefully before beginning installation to ensure proper function and safety.
Features
- WeatherMax Construction: Water- and corrosion-resistant design prevents blade droop and ensures longevity in harsh rain and salt environments.
- SureSpeed Technology: Delivers high airflow velocity while maintaining quiet, wobble-free performance.
- WhisperWind Motor: A 3-speed reversible motor provides ultra-powerful air movement with whisper-quiet operation.
- High Airflow: Capable of strong airflow up to 5147 cubic feet per minute (CFM) on high speed.
- Wall Control: Includes a convenient wall control for easy adjustments.
- Integrated LED Light Kit: Features an 18-Watt energy-efficient, dimmable LED light with a lifetime expectation of 46,000 hours, allowing control over ambiance.
- Wet Rated: Suitable for direct exposure to weather, ideal for pergolas, patios, and decks.
- Reversible Motor: Allows for seasonal use; downdraft mode for summer cooling and updraft mode for winter heat circulation.
- Enhanced Longevity: Hunter performs extensive testing, exceeding industry standards, to ensure durability.
- Limited Lifetime Motor Warranty: Backed by Hunter's extensive experience in fan manufacturing.
Product Overview
Front view of the Hunter Skyflow Outdoor Ceiling Fan in Matte Silver, showcasing its five blades and integrated LED light kit.
A detailed view of the fan's motor housing and the frosted LED light cover, highlighting the Hunter brand logo.
The Hunter Skyflow fan installed on an outdoor patio overlooking a beach, demonstrating its suitability for wet-rated environments.
Setup and Installation
Safety Precautions
- Always disconnect power at the circuit breaker before installation or servicing.
- Ensure all wiring connections comply with local and national electrical codes.
- Mount the fan only to an outlet box marked "Acceptable for Fan Support of 35 lbs (15.9 kg) or less" and use the mounting screws provided with the outlet box.
- Maintain a minimum clearance of 7 feet from the floor to the bottom of the fan blades.
Mounting the Fan
- Secure the mounting bracket to the ceiling outlet box using the provided screws.
- Carefully lift the fan assembly and hang it from the mounting bracket.
Wiring Connections
- Connect the fan's ground wire to the household ground wire.
- Connect the fan's neutral wire to the household neutral wire.
- Connect the fan's hot wire to the household hot wire.
- Connect the light kit wires as per the wiring diagram in the full manual.
- Ensure all wire nuts are securely fastened.
Blade Installation
- Attach each fan blade to its blade iron using the screws provided.
- Secure the blade irons to the motor housing.
Operating Instructions
Using the Wall Control
Your Hunter Skyflow fan comes with a dedicated wall control for convenient operation. The wall control typically includes buttons for:
- Fan Speed: Adjusts the fan speed (Low, Medium, High).
- Light On/Off: Toggles the integrated LED light.
- Light Dimming: Press and hold the light button to dim or brighten the LED light.
- Fan Direction (Reverse Switch): A separate switch, usually located on the fan's motor housing, controls the direction of blade rotation.
Reversing Fan Direction for Seasonal Use
To change the direction of airflow for summer or winter operation:
- Ensure the fan is turned off and the blades have come to a complete stop.
- Locate the reverse switch on the motor housing (often a small slide switch).
- Slide the switch to the opposite position.
- Turn the fan back on. In summer, blades should rotate counter-clockwise for a downdraft. In winter, blades should rotate clockwise for an updraft to circulate warm air.
Maintenance
- Cleaning: Use a soft brush or lint-free cloth to prevent scratching the finish. Do not use abrasive cleaners or water directly on the fan.
- Blade Cleaning: Clean blades with a damp cloth and mild soap if necessary. Ensure blades are completely dry before operating the fan.
- Tightening Screws: Periodically check all screws on the motor housing and blade attachments for tightness.
- Light Kit: The integrated LED light kit is designed for long life and typically does not require bulb replacement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan will not start | No power to the fan; loose wire connections; blown fuse/tripped breaker. | Check circuit breaker/fuse; ensure wall switch is ON; verify all wire connections are secure. |
| Fan wobbles | Loose blade screws; unbalanced blades; improper mounting. | Tighten all blade screws; check blade balance using a balancing kit (not included); ensure mounting bracket is securely installed. |
| Light not working | Loose wire connection to light kit; faulty LED module. | Check light kit wiring; if LED module is faulty, contact Hunter customer support. |
| Noisy operation | Loose screws; motor hum; fan not properly grounded. | Tighten all screws; ensure proper grounding; allow a 24-hour break-in period for new motors. |
For further assistance, please refer to the complete troubleshooting guide in the full product manual or contact Hunter customer support.
Specifications
| Attribute | Value |
|---|---|
| Brand | Hunter |
| Model Name | Skyflow |
| Model Number | 52612 |
| Color | Matte Silver |
| Material | Glass, Plastic, Metal |
| Size | 52 inches |
| Indoor/Outdoor Usage | Outdoor |
| Power Source | AC |
| Control Method | Wall Control (Remote Controlled option available) |
| Light Source Type | LED |
| Wattage | 45 watts (Fan), 18 watts (LED) |
| Brightness | 1600 lumen |
| Airflow | Up to 5147 CFM |
| Item Weight | 18.92 pounds (8.6 Kilograms) |
| Water Resistance Level | Water Resistant (Wet Rated) |
| Assembly Required | Yes |
Hunter Quality and Testing
Hunter is committed to providing high-quality, safe, and reliable products. Their in-house testing lab, certified by UL and Intertek ETL, performs rigorous tests that often exceed industry standards. This dedication ensures that every Hunter fan meets stringent quality and safety requirements.
Official video from Hunter Fan Company detailing their rigorous testing and certification processes, including blade iron shake tests, accelerated life tests, and rain tests, to ensure product safety and reliability.
Warranty and Support
The Hunter 52612 Skyflow Outdoor Ceiling Fan is backed by a Limited Lifetime Motor Warranty, reflecting Hunter's confidence in their product's durability and performance. For warranty claims, technical support, or any questions not covered in this manual, please contact Hunter customer service.
Visit the official Hunter website or refer to the contact information provided with your product packaging for support details.
