Tatybo XW6 PC Gaming Headset User Manual

1. Introduction

This manual provides instructions for the Tatybo XW6 PC Gaming Headset. This headset is designed for an immersive audio experience across multiple gaming platforms, featuring virtual 7.1 surround sound, a noise-reducing microphone, and comfortable over-ear design.

Image: The Tatybo XW6 PC Gaming Headset, showcasing its design and the attached in-line control unit.

2. What's in the Box

Verify that all components are present:

• Gaming Headset
• 7.1 Sound Card (USB adapter)
• User Manual (this document)

Image: Included components: the headset, USB sound card, and 3.5mm jack connection.

3. Setup and Connectivity

The Tatybo XW6 headset offers versatile connectivity options for various gaming platforms.

3.1. Connecting to PC, PS4/PS5, Nintendo Switch (Dock Mode)

Use the included USB Sound Card for these platforms to enable virtual 7.1 surround sound and RGB lighting.

1. Connect the headset's 3.5mm jack to the 7.1 Sound Card (USB adapter).
2. Plug the USB Sound Card into an available USB port on your PC, PS4, PS5, or Nintendo Switch dock.
3. Ensure the headset is selected as the audio input and output device in your system settings.

3.2. Connecting to Xbox Controller, PS4/PS5 Controller, Nintendo Switch (Handheld), Mobile Devices

For devices with a 3.5mm audio port, connect directly using the headset's 3.5mm jack. Note that 7.1 surround sound and RGB lighting are typically not available via 3.5mm connection.

1. Plug the headset's 3.5mm jack directly into the 3.5mm audio port on your controller or device.
2. Adjust audio settings on your device as needed.

Image: Diagram illustrating USB and 3.5mm jack connections for PC, consoles, and mobile devices.

4. Operating Instructions

4.1. In-line Controller Functions

The headset features an in-line controller for easy access to audio adjustments.

Image: Close-up of the in-line controller, detailing buttons for Volume Up, Volume Down, 7.1 Surround Mode, Headphone Mute, and Mic Mute.

• Volume Up/Down: Use the dedicated buttons to adjust the headphone volume.
• 7.1 Surround Mode: Press the 7.1 button to activate or deactivate virtual 7.1 surround sound (available via USB connection).
• Headphone Mute: Press the headphone icon button to mute or unmute headphone audio.
• Mic Mute: Press the microphone icon button to mute or unmute the microphone.

4.2. Microphone Usage

The flexible microphone features noise reduction for clear communication.

• Position the microphone approximately 1-2 inches from your mouth for optimal voice capture.
• Utilize the mic mute button on the in-line controller when the microphone is not needed.

Image: The headset's microphone, highlighting its noise reduction capability for clear communication.

4.3. RGB Lighting

When connected via USB, the headset's RGB lights will automatically cycle through colors, enhancing the gaming atmosphere.

Image: The Tatybo XW6 headset with its vibrant RGB lighting illuminated.

5. Comfort and Fit

The Tatybo XW6 headset is designed for extended use with comfort features:

• Adjustable Headband: Extend or retract the headband to fit your head size comfortably.
• Soft Earmuffs: The breathable earmuffs are designed to alleviate pressure during long gaming sessions.

Image: Details of the headset's breathable earmuffs and adjustable head beam for comfortable wear.

6. Maintenance

To ensure the longevity and optimal performance of your headset, follow these maintenance guidelines:

• Clean the headset regularly with a soft, dry cloth.
• Avoid using harsh chemicals or abrasive cleaners.
• Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
• Do not expose the headset to water or excessive moisture.
• Handle the cables gently to prevent damage.

7. Troubleshooting

If you encounter issues with your Tatybo XW6 headset, refer to the following common problems and solutions:

• No Sound:
  • Ensure the headset is properly connected to your device (USB or 3.5mm jack).
  • Check the volume controls on the in-line controller and your device.
  • Verify that the headphone mute button on the in-line controller is not active.
  • Confirm the headset is selected as the default audio output device in your system settings.
• Microphone Not Working:
  • Ensure the microphone is positioned correctly and not muted via the in-line controller.
  • Check your device's audio settings to ensure the headset microphone is selected as the input device.
  • Test the microphone on another device if possible to rule out a device-specific issue.
• 7.1 Surround Sound Not Working:
  • Ensure the headset is connected via the USB Sound Card. 7.1 surround sound is not available via 3.5mm connection.
  • Press the 7.1 button on the in-line controller to activate the feature.
  • Verify that your operating system or game settings are configured for 7.1 surround sound output.
• RGB Lights Not On:
  • Ensure the headset is connected via the USB Sound Card. RGB lighting requires USB power.
  • Check the USB connection for proper seating.

8. Specifications

9. Warranty and Support

Tatybo provides a 2-year warranty for this gaming headset. This warranty covers manufacturing defects and ensures the quality of your product.

For customer support, technical assistance, or warranty claims, please contact Tatybo customer service. We offer 24-hour customer support to assist you with any inquiries.

Refer to the contact information provided with your purchase or visit the official Tatybo website for support details.

Note: The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.