1. Important Safety Instructions
Please read all instructions carefully before using your Bearhug Electric Heated Throw Blanket. Failure to follow these instructions may result in fire, electric shock, or injury.
- Electrical Safety: Use only with the correct voltage (120V/60Hz). Always unplug the blanket when not in use.
- Overheat Protection: The blanket is equipped with an overheat switch-off protection system for your safety.
- Avoid Prolonged Use: Do not use the blanket for prolonged periods on one body area to prevent skin irritation.
- Sharp Objects: Do not use sharp objects on the product, as this may damage the heating elements.
- Wire Entanglement: Prevent the power cord and controller wires from becoming entangled.
- Overlapping: Avoid overlapping the heated blanket with other heating products.
- Controller Placement: Do not wrap the controller in the product when in use to ensure proper ventilation.
- User Suitability: Not suitable for individuals with limited self-care ability.

2. Product Features
The Bearhug Electric Heated Throw Blanket is designed for comfort and warmth with advanced features:
- Dual-Sided Design: Features exceptionally soft patterned faux fur on one side and black faux fur on the other, offering reversible comfort.
- Customized Heating: Equipped with an easy-to-use controller offering 6 heating settings (90°F-108°F).
- Even Heat Distribution: Built-in U-shape heating wires ensure consistent warmth across the entire blanket.
- Automatic Shut-off: Includes a 4-hour auto-off timer for enhanced safety and peace of mind.
- Overheat Protection: ETL certified with integrated overheat protection.
- User-Friendly: Features an extra-long cord for maximum flexibility and convenience.
- Material: Made from high-quality Faux Fur and Sherpa for a luxurious feel.


3. Setup Instructions
- Unpack: Carefully remove the electric heated throw blanket from its packaging.
- Inspect: Before first use, inspect the blanket and power cord for any signs of damage. Do not use if damaged.
- Connect Controller: Ensure the controller is securely plugged into the blanket's connector.
- Placement: Place the blanket on a sofa, chair, or bed as desired. Ensure it is spread out evenly and not bunched or folded tightly, which could cause localized overheating.
- Plug In: Plug the power cord into a standard 120V/60Hz electrical outlet.
4. Operating Instructions
Using your Bearhug Electric Heated Throw Blanket is simple with its intuitive controller:
- Power On: Press the power button on the controller to turn the blanket on. The display will show the current heat setting.
- Adjust Heat Level: Use the '+' and '-' buttons to select your desired heat level from 1 to 6. Level 1 is the lowest (90°F) and Level 6 is the highest (108°F).
- Auto-Off Timer: The blanket features a 4-hour auto-off timer for safety. It will automatically shut off after 4 hours of continuous use.
- Power Off: To turn off the blanket manually, press the power button again. Always unplug the blanket from the wall outlet when not in use.

5. Care and Maintenance
To ensure the longevity and cleanliness of your Bearhug Electric Heated Throw Blanket, follow these care instructions:
- Disconnect Power: ALWAYS UNPLUG THE POWER CORD AND DETACH THE CONTROLLER FROM THE BLANKET BEFORE WASHING.
- Machine Washable: The blanket is machine washable. Use a gentle cycle with cold water.
- Detergent: Use a mild detergent. Do not use bleach.
- Tumble Dry: Tumble dry on a low heat setting. Ensure the blanket is completely dry before reattaching the controller and using it.
- Do Not Iron: Do not iron the blanket.
- Do Not Dry Clean: Do not dry clean the blanket.
- Storage: When not in use, store the blanket in a cool, dry place.

6. Troubleshooting Guide
If you encounter any issues with your Bearhug Electric Heated Throw Blanket, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket is not heating. | Not plugged in correctly; Controller not connected; Power outage; Overheat protection activated. | Ensure power cord is securely plugged into outlet and controller is connected to blanket. Check household circuit breaker. Unplug and allow to cool for 30 minutes before replugging. |
| Controller display is off or flashing. | Loose connection; Malfunction. | Check all connections. Unplug and replug. If issue persists, contact customer support. |
| Blanket feels too hot or not hot enough. | Incorrect heat setting. | Adjust heat setting using the '+' or '-' buttons on the controller. |
| Blanket is bunched or folded. | Improper usage. | Spread the blanket out evenly. Avoid folding or bunching during use to ensure even heat distribution and prevent damage. |
If the problem persists after trying these solutions, please contact Bearhug Customer Support.
7. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Bearhug |
| Model Name | SQT |
| Product Dimensions | 152L x 127W Centimetres (50" x 60") |
| Material | Faux Fur, Sherpa |
| Colour | Marble Black |
| Heating Levels | 6 (90°F-108°F) |
| Auto-Off Timer | 4 Hours |
| Safety Certification | ETL Certified |
| Special Features | Corded Electric, Reversible, Skin Friendly, Overheat Protection |
| Care Instructions | Machine Washable, Tumble Dry (Do not iron, bleach, or dry clean) |
8. Warranty and Support
Your Bearhug Electric Heated Throw Blanket comes with a 5-year warranty, ensuring quality and reliability.
For any questions, concerns, or warranty claims, please contact Bearhug Customer Support. We offer a 30-day return or exchange policy and aim for a 24-hour response to all inquiries.
Please visit the official Bearhug website or refer to your purchase documentation for the most up-to-date contact information.