InnovaGoods Folding Foot Spa Instruction Manual

1. Safety Information

Please read all safety instructions carefully before using the InnovaGoods Folding Foot Spa. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Electrical Safety:
  • Always unplug the appliance from the power outlet immediately after use and before cleaning.
  • Do not use the appliance near water or in wet environments.
  • Do not immerse the appliance, power cord, or plug in water or other liquids.
  • Do not operate the appliance with a damaged cord or plug. If the cord or plug is damaged, contact customer support.
  • Keep the power cord away from heated surfaces.
• Water Usage:
  • Never operate the foot spa without water.
  • Do not fill water above the maximum fill line indicated inside the basin.
  • Ensure the appliance is placed on a stable, level surface before filling with water.
• Health Precautions:
  • Consult a doctor before use if you have diabetes, circulatory problems, phlebitis, open wounds, skin lesions, or any other medical condition.
  • Do not use if you are pregnant.
  • Discontinue use if you experience pain, discomfort, or any adverse reaction.
  • Do not use for more than 30 minutes at a time. Allow the unit to cool down before next use.
• General Safety:
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
  • Children should be supervised to ensure that they do not play with the appliance.
  • Use this appliance only for its intended use as described in this manual.
  • Do not stand in the foot spa.

2. Product Overview

The InnovaGoods Folding Foot Spa is designed to provide a relaxing and therapeutic foot massage experience. Its compact, foldable design makes it easy to store and transport. Key features include:

• Multifunctionality: Combines vibration massage, infrared heat, and bubble generation.
• Water Heater: Heats water up to 50 °C for enhanced relaxation.
• Bubble Generator: Provides a soothing whirlpool effect (pressure: 16 kPa).
• 10 Massage Rollers: Features 5 ergonomic rollers for each foot, designed to stimulate pressure points based on foot reflexology.
• Aromatherapy Compartment: Allows for the addition of bath bombs, salts, or essential oils for an aromatic experience.
• Foldable Design: Lightweight and portable, with a 10-liter capacity, making it easy to store in small spaces.

Image: The InnovaGoods Folding Foot Spa shown in its compact, folded state, ready for storage or transport.

3. Setup

Follow these steps to set up your InnovaGoods Folding Foot Spa:

1. Unpack the Unit: Carefully remove the foot spa from its packaging. Retain packaging for future storage or transport.
2. Unfold the Foot Spa: Place the folded unit on a flat, stable surface. Gently push down on the base while pulling up the top rim to expand the spa to its full size. Ensure all sides are securely locked into place.
   

   Image: A person demonstrating the unfolding process of the foot spa.

3. Position the Unit: Place the unfolded foot spa on a firm, level, and dry surface, such as a bathroom floor or a sturdy mat. Ensure it is within reach of a power outlet.
4. Fill with Water: Fill the foot spa with warm or cold water. Do not exceed the maximum fill line indicated inside the basin. The capacity is approximately 10 liters.
   

   Image: The foot spa being filled with water, showing the internal structure and rollers.

5. Add Aromatherapy (Optional): If desired, open the aromatherapy compartment (usually a small removable tray or section) and add bath salts, essential oils, or bath bombs. Close the compartment securely.
   

   Image: A hand adding bath salts into the designated compartment of the foot spa.

6. Connect to Power: Plug the power cord into a standard electrical outlet.

4. Operating Instructions

Once set up, you can begin your foot spa experience:

1. Power On: Press the ON/OFF button located on the control panel. The water heater and bubble generator will activate simultaneously. The infrared function also begins upon activation.
2. Adjust Temperature: The foot spa will heat the water up to approximately 50 °C. There are no separate temperature controls; the heating function is integrated with the main power button.
3. Use Massage Rollers: Gently place your feet into the foot spa. The 10 integrated massage rollers (5 for each foot) are designed to provide a manual massage as you move your feet over them. These rollers stimulate pressure points for a relaxing effect.
   

   Image: A close-up view of the textured massage rollers inside the foot spa basin.

4. Enjoy the Experience: Relax and enjoy the combination of heat, bubbles, and massage. The recommended usage time is up to 30 minutes per session.
   

   Image: A person's feet submerged in the foot spa, with visible bubbles and water movement.

5. Power Off: After your session, press the ON/OFF button again to turn off the unit.

5. Maintenance

Proper maintenance ensures the longevity and hygiene of your foot spa:

1. Unplug Before Cleaning: Always ensure the foot spa is unplugged from the power outlet before cleaning or performing any maintenance.
2. Drain Water: Carefully pour out the water from the basin. The unit may have a designated pouring spout or drain plug for easier emptying.
3. Clean the Basin: Wipe the interior of the basin with a soft, damp cloth and a mild, non-abrasive cleaner. Rinse thoroughly with clean water. Do not use harsh chemicals or abrasive sponges, as these can damage the surface.
4. Clean Rollers and Compartment: Clean the massage rollers and the aromatherapy compartment with a damp cloth. Ensure no residue from salts or oils remains.
5. Dry Thoroughly: Allow all parts of the foot spa to air dry completely before folding or storing.
6. Folding for Storage: Once dry, gently push the sides of the basin inwards to collapse the unit back into its folded, compact state. Ensure the power cord is neatly wrapped.
   

   Image: The foot spa shown in its folded configuration, suitable for compact storage in a drawer or cabinet.

7. Storage: Store the foot spa in a cool, dry place, away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your InnovaGoods Folding Foot Spa, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact customer support.

7. Specifications

8. Warranty & Support

Warranty Information

This product comes with a limited warranty. Please refer to the warranty card included with your purchase or your purchase documentation for specific terms and conditions, including the warranty period and coverage details. Keep your proof of purchase for warranty claims.

Customer Support

If you have any questions, require technical assistance, or need to report a problem with your InnovaGoods Folding Foot Spa, please contact your retailer or the InnovaGoods customer service department. Contact information can typically be found on the product packaging or the official InnovaGoods website.

When contacting support, please have your product model number (8435527825973) and proof of purchase readily available.