PATPET DC628B-WA1 Dog Training Collar User Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your PATPET DC628B-WA1 Dog Training Collar. Please read this manual thoroughly before operating the device to ensure proper function and to maximize its benefits for training your dog.

The PATPET DC628B-WA1 is designed to assist in training dogs weighing between 5 and 100 lbs, offering a range of up to 1800 feet. It features three safe training modes: Beep, Vibration, and Static Correction, with adjustable intensity levels to suit your dog's temperament and training needs. The collar receiver is IPX7 waterproof, allowing for use in various weather conditions and water activities.

Package Contents

• 1 x Remote Transmitter
• 2 x Collar Receivers (Beige)
• 2 x Adjustable Nylon Collar Straps
• 1 x USB Charging Cable (Type-C)
• 1 x Test Light Tool
• 4 x Contact Points (2 short, 2 long)
• 1 x User Manual

Image: The PATPET DC628B-WA1 remote transmitter and two collar receivers, illustrating the complete package contents.

Product Features

• Compact and Lightweight Receiver: Designed for comfort, suitable for dogs from 5 to 100 lbs. The receiver weighs approximately 1.4 oz.
• Adjustable Collar Belt: Fits neck sizes from 7 to 23 inches.
• Three Humane Training Modes: Beep, Vibration (1-8 levels), and Static Correction (0-32 levels).
• 1800ft Remote Control Range: Provides extensive coverage for outdoor training.
• IPX7 Waterproof Receiver: Allows the collar to be submerged in water up to 1 meter for 30 minutes.
• IPX5 Water-Resistant Remote: Protected against low-pressure water jets from any direction.
• Quick Charge & Long Battery Life: Type-C charging port for simultaneous charging of receiver and remote. Up to 30 days of use on a 2-hour charge.
• Security Keyboard Lock: Prevents accidental activation of static correction.
• Supports Two Dogs: Remote can control up to two collar receivers.

Safety Information

Please observe the following safety guidelines to ensure the well-being of your dog and the longevity of the device:

• This device is intended for training purposes only. Do not use it for any other purpose.
• Do not leave the collar on your dog for more than 12 hours per day. Prolonged wear can cause skin irritation.
• Regularly check your dog's neck for any signs of irritation or sores. If irritation occurs, discontinue use and consult a veterinarian.
• Ensure the contact points are appropriate for your dog's coat length to ensure effective contact without causing discomfort.
• Always start with the lowest vibration or static correction level and gradually increase if necessary.
• The static correction feature should be used responsibly and only when other training methods are ineffective.
• Keep the device out of reach of children.
• The remote is IPX5 water-resistant, but it should not be submerged in water.

Setup

1. Charging the Devices

Before first use, fully charge both the remote transmitter and the collar receivers. Use the provided Type-C charging cable.

• Connect the charging cable to the charging ports on the remote and receivers.
• Plug the USB end into a standard USB power adapter (not included).
• The battery indicator on the remote will show charging status. The receiver's indicator light will turn solid green when fully charged.
• A full charge typically takes 2 hours.

Image: The remote and collar receiver connected to a Type-C charging cable, demonstrating the charging process.

2. Pairing the Remote and Receiver(s)

The devices are typically pre-paired from the factory. If re-pairing is needed or for a second collar:

1. Ensure both the remote and receiver are turned off.
2. Press and hold the power button on the receiver until the indicator light flashes rapidly.
3. On the remote, select the desired dog channel (1 or 2) using the 1/2 button.
4. Press any training mode button (Beep, Vibration, or Static) on the remote.
5. The receiver's indicator light will stop flashing and remain solid, indicating successful pairing.

3. Fitting the Collar

Proper fit is crucial for comfort and effectiveness.

1. Select the appropriate contact points (short for short-haired dogs, long for long-haired dogs) and screw them onto the receiver.
2. Place the receiver on your dog's neck, ensuring the contact points are directly touching the skin.
3. The collar should be snug enough that two fingers can barely fit between the strap and your dog's neck.
4. Adjust the nylon strap as needed.

Image: A dog wearing the PATPET training collar, demonstrating the correct placement and snugness of the receiver on the neck.

Operating Instructions

Remote Control Overview

• Power Button: Turns the remote on/off.
• 1/2 Button: Switches between controlling Dog 1 and Dog 2.
• Beep Button: Delivers an audible tone to the collar.
• Vibration Button: Delivers a vibration to the collar.
• Static Button: Delivers a static correction to the collar.
• "Press" Dial: Used to adjust intensity levels for Vibration and Static modes. Press to toggle between modes, then turn to adjust.
• Security Keyboard Lock: Slide switch to lock/unlock the remote to prevent accidental activation.

Image: The PATPET DC628B-WA1 remote control, highlighting its various buttons and digital display for mode and level selection.

Training Modes and Level Adjustment

The PATPET DC628B-WA1 offers three distinct training modes:

• Beep Mode: Delivers an audible tone. This mode has no adjustable levels.
• Vibration Mode: Delivers a non-harmful vibration. Adjustable from 1 to 8 levels.
• Static Correction Mode: Delivers a static pulse. Adjustable from 0 to 32 levels. Level 0 is a safety feature that disables static correction.

To adjust the intensity level for Vibration or Static Correction:

1. Ensure the remote is unlocked.
2. Press the "Press" dial to toggle between Vibration and Static Correction modes. The active mode will be displayed on the screen.
3. Once the desired mode is selected, turn the "Press" dial clockwise to increase the level or counter-clockwise to decrease it.
4. Always start with the lowest effective level.

Image: A close-up of the PATPET DC628B-WA1 remote, illustrating the "Press" dial and its function for adjusting vibration and static correction levels.

Using the Security Keyboard Lock

To prevent accidental activation of training modes, especially static correction, use the security keyboard lock:

• Slide the lock switch on the side of the remote to the locked position. This will disable the training buttons.
• Slide the switch to the unlocked position to enable the training buttons.

Image: The PATPET DC628B-WA1 remote control, showing the side switch for the security keyboard lock to prevent unintended commands.

Maintenance

• Cleaning: Wipe the remote and collar receiver with a damp cloth. Do not use harsh chemicals.
• Battery Care: To prolong battery life, avoid fully discharging the devices frequently. Charge them regularly.
• Water Resistance: The receiver is IPX7 waterproof. After exposure to water, wipe it dry. The remote is IPX5 water-resistant; avoid submerging it.
• Contact Points: Periodically check and clean the contact points on the receiver to ensure proper function and prevent skin irritation.

Troubleshooting

Specifications

• Model: DC628B-WA1
• Brand: PATPET
• Receiver Weight: Approximately 1.4 ounces
• Collar Neck Size: 7 - 23 inches
• Recommended Dog Weight: 5 - 100 lbs
• Remote Control Range: Up to 1800 feet
• Receiver Waterproof Rating: IPX7
• Remote Water Resistance: IPX5
• Battery Type: Lithium Ion (included)
• Charging Port: Type-C
• Charging Time: Approximately 2 hours
• Battery Life (Usage): Up to 30 days (collar), up to 30 days (remote)
• Material: Plastic

Warranty and Support

PATPET products come with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official PATPET website.

For technical support, troubleshooting assistance, or warranty claims, please contact PATPET customer service through their official channels. Contact information can typically be found on the product packaging or the brand's website.