Product Overview
The Geeni Surge Ultra Smart 8-Outlet Surge Protector is designed to safeguard your electronic devices while providing smart control capabilities. It features 6 smart outlets that can be individually controlled via the Geeni app or voice commands, and 2 always-on outlets for essential devices. With 1200 Joules of surge protection and a 6-foot cord, it offers both safety and convenience for your smart home setup.
This device integrates seamlessly with your home Wi-Fi network, requiring no additional hub. It supports voice control through Amazon Alexa and Google Assistant, allowing for hands-free management of connected appliances.
Image: Geeni Surge Ultra Smart 8-Outlet Surge Protector highlighting its features.
Package Contents
- Geeni Surge Ultra Smart 8-Outlet Surge Protector (Model GN-SW008-101)
- User Manual (this document)
Setup Guide
1. Download the Geeni App
Download the Geeni app from the App Store (iOS) or Google Play Store (Android). Register for a new account or log in to an existing one.
2. Connect the Surge Protector
Plug the Geeni Surge Ultra into a standard wall outlet. Ensure the power switch on the side of the surge protector is in the 'ON' position. The Wi-Fi indicator light should begin to blink rapidly, indicating it's ready for pairing.
Image: Diagram of the Geeni Surge Ultra showing its physical features and dimensions.
3. Pair with Geeni App
- Open the Geeni app.
- Tap the "+" icon in the top right corner to add a new device.
- Select "Power Strip" or the appropriate device type from the list.
- Follow the on-screen instructions to connect the surge protector to your 2.4GHz Wi-Fi network. You may need to confirm that the indicator light is blinking rapidly.
- Once connected, you can name your device and individual smart outlets.
For a visual guide on setting up and using your Geeni Surge Ultra, please watch the video below:
Video: "Experience Smart Living with the Geeni Surge Ultra" - This video demonstrates the setup process and key features of the Geeni Surge Ultra Smart Surge Protector.
Operating Instructions
Using the Geeni App
Once paired, you can control your Geeni Surge Ultra from anywhere using the Geeni app.
- Individual Outlet Control: Tap on the device in the app to see all 8 outlets. The 6 smart outlets can be turned ON or OFF individually. The 2 always-on outlets remain powered as long as the surge protector is plugged in and its main switch is ON.
- Scheduling: Set schedules for your smart outlets to automatically turn ON or OFF at specific times or days. This is useful for lights, coffee makers, or other appliances.
- Timer Mode: Use the timer function to automatically turn off an outlet after a set duration.
Image: Geeni app interface demonstrating individual outlet control.
Image: Geeni app interface demonstrating the scheduling feature.
Voice Control
The Geeni Surge Ultra is compatible with Amazon Alexa and Google Assistant. Link your Geeni account to your voice assistant app to enable voice commands.
- For Amazon Alexa: Say, "Alexa, turn on the lamp" (if your outlet is named "lamp").
- For Google Assistant: Say, "Hey Google, turn off the coffee maker" (if your outlet is named "coffee maker").
Image: Demonstration of voice control with Amazon Alexa.
Manual Power Switch
The surge protector includes a physical ON/OFF switch on its side. This switch controls the power to all outlets. In case of a power surge, the switch may trip to the 'OFF' position to protect connected devices. To reset, simply toggle the switch back to 'ON'.
Image: Close-up of the manual power switch.
Safety and Maintenance
Safety Precautions
- Do not exceed the maximum load current of 15 Amps or maximum power of 1875 Watts.
- This device is for indoor use only. Do not expose to moisture or extreme temperatures.
- Do not disassemble or modify the device.
- Keep out of reach of children.
- Ensure the surge protector is properly grounded.
Cleaning
Unplug the surge protector before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
Troubleshooting
- Device not connecting to Wi-Fi:
- Ensure your Wi-Fi network is 2.4GHz. The Geeni Surge Ultra does not support 5GHz networks.
- Check that the Wi-Fi indicator light is blinking rapidly. If not, press and hold the Wi-Fi button (usually near the always-on outlets) for 5 seconds to enter pairing mode.
- Verify your Wi-Fi password is correct.
- Move the surge protector closer to your Wi-Fi router.
- Voice control not working:
- Ensure your Geeni account is correctly linked to your Amazon Alexa or Google Assistant app.
- Check the names of your outlets in the Geeni app and use those exact names in your voice commands.
- Verify your voice assistant device is connected to the internet.
- Outlets not responding:
- Check the main ON/OFF switch on the side of the surge protector. Ensure it is in the 'ON' position.
- Confirm the device is still connected to Wi-Fi (check the indicator light).
- Restart the Geeni app or the surge protector itself by unplugging and replugging it.
Specifications
| Feature | Detail |
|---|---|
| Brand | Geeni |
| Model Number | GN-SW008-101 |
| Total Outlets | 8 (6 Smart, 2 Always-On) |
| Surge Protection | 1200 Joules |
| Cord Length | 6 ft (1.8m) |
| Wi-Fi Compatibility | 2.4GHz only |
| Voice Control | Amazon Alexa, Google Assistant |
| Amperage | 15 Amps |
| Max Power | 1875 Watts |
| Plug Type | Type B (Angled) |
| Smart Energy Saving | Yes |
Warranty and Support
Warranty Information
This Geeni Surge Ultra Smart 8-Outlet Surge Protector comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or external causes.
Customer Support
For technical assistance, troubleshooting, or warranty claims, please contact Geeni Customer Support. You can typically find contact information on the Geeni website or within the Geeni app's settings/help section.
Please have your product model number (GN-SW008-101) and proof of purchase ready when contacting support.