Westcott 00529

Westcott iPoint® GEM Battery Pencil Sharpener User Manual

Model: 00529

Introduction

The Westcott iPoint® GEM Battery Pencil Sharpener is designed for efficient and convenient pencil sharpening. Its compact size and battery operation make it ideal for desktop use in various settings. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your sharpener.

Westcott iPoint GEM Battery Pencil Sharpener, Blue

Front view of the Westcott iPoint® GEM Battery Pencil Sharpener in blue.

Setup

Battery Installation

The Westcott iPoint® GEM Battery Pencil Sharpener requires 4 AA batteries (not included).

  1. Locate the battery compartment on the bottom of the sharpener.
  2. Open the battery compartment cover.
  3. Insert 4 AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
  4. Close the battery compartment cover securely.
Back view of the Westcott iPoint GEM Battery Pencil Sharpener

Back view of the sharpener, showing the location of the battery compartment.

Operating Instructions

Sharpening a Pencil

  1. Ensure batteries are correctly installed.
  2. Hold the sharpener firmly on a flat surface. The sharpener has rubber grippers on the bottom for stability.
  3. Insert a standard-sized pencil into the sharpening hole at the top of the unit.
  4. Apply gentle downward pressure. The sharpener will automatically begin sharpening.
  5. Remove the pencil once it reaches the desired sharpness. The sharpener is designed to create a fine point. Avoid over-sharpening to prevent lead breakage.
Hand sharpening a pencil with the Westcott iPoint GEM sharpener

A hand inserting a pencil into the sharpener for sharpening.

Pencil inserted into the Westcott iPoint GEM sharpener

Close-up of a pencil inserted into the sharpening mechanism.

Emptying Shavings Reservoir

The EZ-view shavings reservoir allows you to monitor the fill level.

  1. To empty, gently twist the top section of the sharpener counter-clockwise to detach it from the base.
  2. Carefully empty the pencil shavings into a waste bin.
  3. Realign the top section with the base and twist clockwise until it clicks securely into place.
Westcott iPoint GEM sharpener with top removed for emptying

The sharpener with its top section removed, revealing the shavings reservoir.

Maintenance

To ensure the longevity and optimal performance of your Westcott iPoint® GEM Battery Pencil Sharpener, follow these maintenance guidelines:

Top view of the Westcott iPoint GEM sharpener showing the blade area

Top view of the sharpener, highlighting the sharpening mechanism and blade area.

Troubleshooting

ProblemPossible CauseSolution
Sharpener does not operate.
  • Dead or incorrectly installed batteries.
  • Shavings reservoir is full or improperly seated.
  • Check and replace batteries; ensure correct polarity.
  • Empty reservoir and ensure it is securely reattached.
Pencil does not sharpen effectively.
  • Dull blades.
  • Pencil lead is broken inside.
  • Improper pencil insertion.
  • Blades are not user-replaceable; consider product replacement if severely dull.
  • Try inserting a different pencil or gently rotating the current one to dislodge broken lead.
  • Ensure pencil is inserted straight and with gentle pressure.
Motor feels hot during use.
  • Prolonged continuous use.
  • Excessive pressure on the pencil.
  • Allow the sharpener to cool down between uses.
  • Use only gentle pressure when sharpening.

Specifications

Warranty and Support

This Westcott iPoint® GEM Battery Pencil Sharpener comes with a one-year manufacturer's warranty. For warranty claims or technical support, please refer to the contact information provided on the product packaging or visit the official Westcott website.

For more information about Westcott products, visit the Westcott Store on Amazon.

Related Documents - 00529

Preview Westcott iPoint Evolution Outer Casing Replacement Guide
Step-by-step instructions for replacing the outer casing of the Westcott iPoint Evolution pencil sharpener. Learn how to disassemble and reassemble your device.
Preview Westcott ClickBox Quick Start Guide and Warranty Information
A comprehensive guide to setting up, assembling, using, and maintaining the Westcott ClickBox softbox, including detailed instructions, component overview, warnings, and warranty terms.
Preview Westcott u60-B LED Light Quick Start Guide & Setup Instructions
Get started with your Westcott u60-B LED Light. This guide provides setup, operation, assembly, and warranty information for the u60-B light and its modifiers.
Preview Westcott FJ80 Firmware Update Instructions
Detailed instructions for updating the firmware on the Westcott FJ80 speedlight. This guide covers downloading the latest firmware, the installation process, and important troubleshooting tips to ensure optimal performance.
Preview Westcott Solix LED Quick Start Guide and Product Information
A comprehensive guide to setting up, using, and maintaining the Westcott Solix LED light. Includes details on included items, setup instructions, usage, light modification options, battery operation, care and storage, and warranty information.
Preview Westcott FJ-X3 Wireless Trigger Quick Start Guide
Quick start guide for the Westcott FJ-X3 Wireless Trigger (models M and S). Covers setup, controls, LCD display, camera preparation, charging, powering on/off, test fire, settings lock, battery replacement, mounting, firmware updates, and warranty information.