LEXIP Sasuke Design Wireless Controller by TSUME - Instruction Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your LEXIP Sasuke Design Wireless Controller by TSUME. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

Product Overview

The LEXIP Sasuke Design Wireless Controller is a high-performance gaming controller designed for Windows 10/11. It features a unique Sasuke design, wireless 2.4GHz connectivity, programmable paddles, and dual vibration feedback for an immersive gaming experience.

Front view of the LEXIP Sasuke Design Wireless Controller, showcasing its unique purple and black design with Naruto Shippuden Sasuke motifs.

Key Features

• Compatible with Windows 10 / 11
• Wireless connection via 2.4GHz USB dongle
• 4 action buttons + 2 joysticks
• 4 programmable paddles
• Dual vibration feedback
• 600mAh Lithium-Ion polymer battery
• USB C charging port
• 1m braided charging cable, USB C to USB Type A
• Audio jack 3.5mm port

2. Setup

Package Contents

• 1 x LEXIP Sasuke Design Wireless Controller
• 1 x 2.4GHz USB Dongle
• 1 x 1m Braided USB C to USB Type A Charging Cable
• 1 x Instruction Manual (this document)

Connecting the Controller

1. Insert the 2.4GHz USB dongle into an available USB Type A port on your Windows 10 or 11 PC.
2. Power on the controller. The controller will automatically attempt to pair with the USB dongle.
3. Once connected, the indicator light on the controller will stabilize, indicating a successful wireless connection.

Front view of the controller with an overlay indicating its 2.4GHz wireless connection capability, emphasizing low latency.

Charging the Controller

• Connect the supplied USB C charging cable to the USB C port on the controller.
• Connect the other end of the cable (USB Type A) to a power source (e.g., PC USB port, USB wall adapter).
• The controller's LED indicator will show charging status. A full charge typically takes approximately 2-3 hours.
• The controller is equipped with a 600mAh Lithium-Ion polymer battery.

Audio Connection

The controller features a 3.5mm audio jack port. You can connect a compatible headset or headphones to this port for in-game audio and microphone functionality (if supported by your headset and game).

3. Operation

Basic Controls

The controller includes standard gaming inputs:

• 4 Action Buttons: Typically labeled A, B, X, Y or similar, for primary in-game actions.
• 2 Joysticks: For precise movement and camera control.
• D-Pad: For directional input.
• Shoulder Buttons/Triggers: For additional in-game actions.

Programmable Paddles

The controller is equipped with 4 programmable paddles on the rear, allowing you to map specific button functions for quick access during gameplay. Refer to the controller's software (if available) or specific button combinations for programming instructions.

Rear view of the controller, clearly showing the four programmable paddles (M1, M2, M3, M4) designed for enhanced gameplay.

Vibration Feedback

The controller features dual vibration motors that provide tactile feedback during gameplay, enhancing immersion. This feature is automatically enabled when supported by the game.

4. Maintenance

Cleaning

• Use a soft, dry cloth to wipe the surface of the controller.
• For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive cleaners.
• Do not allow liquids to enter the controller's openings.

Storage

Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, ensure the controller is fully charged before storage to maintain battery health.

5. Troubleshooting

Controller Not Connecting

• Ensure the USB dongle is securely plugged into your PC.
• Verify the controller is powered on and has sufficient battery charge.
• Try plugging the USB dongle into a different USB port on your PC.
• Restart your PC and try connecting again.

Charging Issues

• Check if the USB C cable is properly connected to both the controller and the power source.
• Try using a different USB C cable or power source to rule out cable/adapter issues.
• Ensure the power source provides adequate power (e.g., a standard USB port or charger).

Buttons/Joysticks Not Responding

• Ensure the controller is properly connected to your PC.
• Check in-game settings to ensure controller input is enabled and correctly configured.
• If issues persist, try updating your PC's USB drivers or the controller's firmware (if available from the manufacturer).

6. Specifications

7. Warranty and Support

The LEXIP Sasuke Design Wireless Controller is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official LEXIP website.

For technical support, troubleshooting assistance, or warranty claims, please contact LEXIP customer service through their official support channels. Ensure you have your product model number (TSXLXGC0001) and proof of purchase available when contacting support.