Vicco Anja Dressing Table with Mirror and LED Lighting

1. Safety Information

Please read all instructions carefully before assembly and use. Retain this manual for future reference.

• Assembly: This product requires assembly. Ensure all parts are present and undamaged before beginning. Do not use power tools for assembly unless explicitly instructed, as this may damage the furniture.
• Heavy Item: The dressing table is heavy (approximately 52.55 kg). Assembly should be performed by two adults to prevent injury.
• Stability: For optimal stability and safety, ensure the dressing table is placed on a flat, level surface. Consider securing the unit to a wall to prevent tipping, especially if children are present. Wall mounting hardware may not be included and should be appropriate for your wall type.
• Electrical Safety (LED Lighting): The LED lighting system is an electrical component. Ensure it is installed correctly and handled with care. Do not expose the LED lights or wiring to water or excessive moisture. Disconnect from power before cleaning or maintenance.
• Glass Mirror: Handle the mirror with care to avoid breakage and injury.

2. Package Contents

Verify that all components listed below are present and in good condition before starting assembly. If any parts are missing or damaged, please contact customer support.

• Dressing Table Components (Particle Board Panels)
• Mirror (Glass)
• LED Lighting Strip/Bulbs
• Assembly Instructions
• Mounting Hardware (screws, dowels, connectors, drawer rails)

Figure 2.1: Overview of the Vicco Anja Dressing Table components.

3. Assembly Instructions

Follow these steps carefully. It is recommended to assemble the unit in the room where it will be used. A soft, clean surface should be used to protect the furniture during assembly.

Figure 3.1: Product dimensions and LED bulb details. Overall dimensions: 139.8 cm (width) x 40 cm (depth) x 115 cm (height).

1. Unpack and Identify Parts: Carefully unpack all components. Lay them out on a clean, soft surface. Refer to the included assembly diagram (if provided) to identify each panel and piece of hardware.
2. Assemble the Main Desk Unit: Begin by connecting the main desk panels using the provided hardware. Ensure all connections are secure.
3. Attach the Side Cabinet: Connect the side cabinet unit to the main desk. This unit typically includes shelves and drawers.
4. Install Drawers: Assemble the drawer boxes. Attach the drawer rails to both the drawer boxes and the corresponding sections within the desk and side cabinet. Ensure the rails are aligned and securely fastened. Note: Some users have reported missing pre-drilled holes for drawer rails. If this occurs, carefully measure and mark the positions according to the assembly diagram before drilling pilot holes.
5. Mount the Mirror Unit: Secure the mirror unit to the top of the main desk. This section also includes additional shelves.
6. Install LED Lighting: Attach the LED lighting strip or individual LED bulbs around the mirror as indicated in the instructions. Ensure the wiring is neatly routed and secured.
7. Final Checks: Once assembled, gently shake the unit to ensure stability. Tighten any loose connections.

Figure 3.2: Detail of the side cabinet and drawers.

4. Operating Instructions (LED Lighting)

The Vicco Anja Dressing Table features integrated LED lighting for enhanced visibility.

• Power Connection: Connect the LED lighting power adapter to a standard electrical outlet.
• Activation: The LED lights are typically controlled by an inline switch on the power cable or a touch sensor on the mirror. Refer to the specific instructions provided with the LED kit for exact operation.
• Energy Efficiency: The LED lighting is designed to be energy-efficient.

Figure 4.1: Dressing table with LED lighting in use.

Figure 4.2: Dressing table with LED lighting in a room.

Figure 4.3: Dressing table with LED lighting in a room, alternative view.

Figure 4.4: LED bulb dimensions (5.5 cm diameter, 5 cm base diameter).

For detailed energy information regarding the LED lighting, please refer to the official EU EPREL database:

View EPREL Energy Label Information

5. Maintenance

Proper care will ensure the longevity and appearance of your dressing table.

• Cleaning: Wipe surfaces with a soft, damp cloth. Use a mild, non-abrasive cleaner if necessary. Avoid harsh chemicals or abrasive materials that could damage the melamine resin coating.
• Mirror Care: Clean the mirror with a glass cleaner and a lint-free cloth. Do not spray cleaner directly onto the mirror; apply it to the cloth first.
• Dusting: Regularly dust all surfaces to prevent buildup.
• Liquid Spills: Wipe up spills immediately to prevent moisture damage to the particle board.
• LED Lights: Ensure the LED lights are off and unplugged before cleaning. Wipe gently with a dry, soft cloth.

6. Troubleshooting

If you encounter issues with your Vicco Anja Dressing Table, refer to the following common problems and solutions:

• Missing Parts or Damaged Components: If you find any parts missing or damaged upon unpacking, do not proceed with assembly. Contact the seller or manufacturer immediately for replacement parts.
• Difficulty Assembling Drawers (Missing Drill Holes): Some users have reported that pre-drilled holes for drawer rails may be absent. If this occurs, carefully measure and mark the correct positions for the drawer rails based on the assembly diagram. Use a small drill bit to create pilot holes before screwing in the rails. Ensure precise alignment for smooth drawer operation.
• LED Lights Not Working:
  • Check if the power adapter is securely plugged into both the wall outlet and the LED lighting cable.
  • Ensure the wall outlet is functional (test with another appliance).
  • Verify that any inline switch or touch sensor for the LED lights is in the 'ON' position.
  • Inspect the wiring for any visible damage. If damaged, discontinue use and contact support.
• Unstable Unit:
  • Ensure all screws and connectors are fully tightened.
  • Verify the unit is on a flat, level surface. Adjust furniture glides if present.
  • Consider using wall anchoring hardware (not included) to secure the unit to the wall, especially if it feels wobbly.

7. Specifications

8. Warranty and Support

For warranty information, specific support, or to order replacement parts, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims.

Manufacturer: Oskar

Seller: ok-living

For further assistance, please refer to the contact information provided at the point of purchase or on the manufacturer's official website.