Product Overview
The Barkan Full Motion - 3 Movement TV Ceiling Mount is designed for Flat and Curved screens ranging from 13 to 65 inches, supporting a maximum weight of 40kg (88lbs). This mount offers versatile viewing angles with telescopic height adjustment, swivel, and tilt capabilities. It is engineered for secure and flexible TV placement in various environments.
Image: The Barkan TV Ceiling Mount illustrating its full motion capabilities, including height adjustment, swivel, and tilt for optimal viewing.
Key Features:
- Full Motion Capability: Offers 3 movements for optimal viewing angles.
- Telescopic Height Adjustment: Minimum distance from ceiling 16.1 inches (41 cm), maximum 38 inches (97 cm).
- Swivel and Tilt: 160° swivel near the screen connection plate and tool-free tilt from 0° to 25°.
- Leveling Adjustment: +/-5° leveling after installation for perfect alignment.
- VESA Compatibility: Supports VESA patterns including 100x100, 100x200, 200x100, 200x200, 200x300, 300x200, 300x300, 300x400, 400x200, 400x300, 400x400 mm, and non-VESA up to 400x400 mm.
- Patented Design: Adapters move in 2 dimensions to firmly hug various screen types, including flat, curved, and those with special back structures.
- Safety Tested: Tested with 4 times its declared weight (up to 352lbs/160kg) for enhanced safety.
- Cable Management: Integrated cable management for a neat installation.
Setup and Installation
Proper installation is crucial for the safety and performance of your Barkan TV Ceiling Mount. Please follow these instructions carefully. It is recommended to have assistance during installation, especially when mounting the TV.
Required Tools and Ceiling Compatibility:
Image: Illustration detailing the necessary tools for installation (drill, safety glasses, stud finder) and compatible ceiling types (drywall ceiling with wood studs, concrete ceiling). Drywall/gypsum/plaster ceilings without wood studs are not compatible.
- Drill: 1/4" - 6mm or 3/8" - 10mm for concrete/wood, 5/32" - 4mm for wood.
- Safety Glasses: Always wear safety glasses during installation.
- Stud Finder: Essential for locating wood studs in drywall ceilings.
- Ceiling Types: Compatible with drywall ceilings with wood studs and concrete ceilings. Not compatible with drywall/gypsum/plaster ceilings without wood studs.
Assembly Steps:
Image: A visual guide demonstrating the three main steps for assembly: 1. Connecting the TV plate to the back of the TV, 2. Installing the bracket on the ceiling, and 3. Snapping the TV onto the bracket.
- Attach Adapters to TV: Connect the TV plate (adapters) to the rear side of your television using the appropriate screws from the hardware kit. Ensure a secure fit. Refer to the included screen-connection screws list in the assembly instructions. If different screws are needed, purchase them locally or contact Barkan support.
- Install Bracket on Ceiling: Securely install the ceiling bracket to a compatible ceiling structure (wood stud or concrete) using the provided wall mounting hardware. Ensure the bracket is level and firmly attached.
- Snap TV onto Bracket: Carefully lift the TV with the attached plate and snap it onto the installed ceiling bracket. Ensure it locks securely into place.
Hardware Kit and VESA Compatibility:
Image: A detailed view of the Barkan Hardware Kit, showing various screws (Hex/Phillips head, long wall screw), anchors (fins, grip points, expanding), metal washers, and plastic spacers for wall mounting and TV mounting.
The hardware kit includes various screws and anchors for different installation scenarios. The TV mounting screws are compatible with 90% of popular TVs. Always use the correct screws for your TV's VESA pattern.
Image: An illustration of different backscreen connection positioning options (VESA patterns) for TVs, indicating how the mount's adapters can be configured to fit various hole patterns. If your TV's connections are not shown, contact Barkan support.
The mount supports VESA standard patterns up to 400x400 mm. For TVs with unique back structures (bumps, indentations, non-standard hole patterns), the patented ball and socket mechanism allows the four adapters to move in 2 dimensions, ensuring a firm fit without additional spacers.
Image: This diagram demonstrates the mount's versatility, showing how its patented design accommodates both flat and curved TV screens, as well as TVs with unique back panel designs, ensuring a secure fit.
Operating the Mount
Once installed, your Barkan TV Ceiling Mount offers flexible adjustments to achieve the perfect viewing angle.
Adjusting Viewing Angles:
Image: A comprehensive diagram illustrating the mount's adjustable features: height adjustment (16.1"-38"), tilt (0°-20°), swivel (160°), and leveling (±5°), along with maximum load capacity (88lbs/40kg) and VESA compatibility.
- Telescopic Height Adjustment: The mount features a telescopic pipe with three sections, allowing you to adjust the TV's distance from the ceiling. The minimum distance is 16.1 inches (41 cm) and the maximum is 38 inches (97 cm). The middle section can be replaced with a different length pipe if needed for specific ceiling heights.
- Swivel: The screen connection plate allows for a 160° swivel, enabling you to rotate the TV horizontally to face different areas of the room.
- Tilt: Adjust the vertical angle of your TV with a tool-free tilt mechanism, ranging from 0° (flat) to 25° (downward). This helps reduce glare and optimize viewing from various seating positions.
- Leveling: After installation, you can fine-tune the TV's horizontal alignment by +/-5° to ensure it is perfectly level.
To adjust, gently push or pull the TV to the desired angle. The mount is designed for smooth and easy movement.
Maintenance
To ensure the longevity and safe operation of your Barkan TV Ceiling Mount, periodic maintenance is recommended:
- Check Connections: Periodically inspect all screws and connections to ensure they remain tight and secure. Over time, vibrations or adjustments may cause slight loosening.
- Clean Surfaces: Wipe down the mount's surfaces with a soft, dry cloth to remove dust. Avoid using abrasive cleaners or solvents.
- Inspect for Damage: Regularly check for any signs of wear, corrosion, or damage to the mount components. If any damage is observed, discontinue use and contact Barkan support.
- Cable Management: Ensure that cables routed through the mount's cable management system are not pinched or stressed.
Troubleshooting
If you encounter issues with your Barkan TV Ceiling Mount, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level after installation. | Initial leveling adjustment not precise. | Utilize the +/-5° leveling adjustment feature to fine-tune the TV's horizontal position. |
| Mount feels loose or unstable. | Mounting screws or bolts are not fully tightened. Incorrect ceiling type. | Ensure all ceiling and TV connection screws are tightened securely. Verify that the mount is installed on a compatible and structurally sound ceiling (wood stud or concrete). |
| Difficulty attaching TV to the bracket. | Incorrect VESA screw size or pattern alignment. | Double-check your TV's VESA pattern and ensure you are using the correct screws from the hardware kit. Align the TV carefully before snapping it into place. Refer to the backscreen connection positioning options. |
| Limited movement (swivel/tilt). | Obstruction or overtightened joints. | Ensure no cables or objects are obstructing movement. Check if any adjustment bolts are overtightened. |
If you continue to experience issues or require further assistance, please contact Barkan support.
Specifications
Image: A technical diagram providing detailed specifications, including backscreen connection (VESA), 5 height level options, height adjustment range, tilt range, swivel range, and leveling adjustment.
| Specification | Value |
|---|---|
| Model Number | 3500B2 |
| Mounting Type | Ceiling Mount |
| Movement Type | Articulating (Full Motion) |
| Compatible TV Sizes | 13 - 65 Inches |
| Maximum Load Capacity | 88 lbs (40 kg) |
| VESA Compatibility | 100x100, 100x200, 200x100, 200x200, 200x300, 300x200, 300x300, 300x400, 400x200, 400x300, 400x400 mm (and non-VESA up to 400x400 mm) |
| Minimum Distance from Ceiling | 16.1 inches (41 cm) |
| Maximum Distance from Ceiling | 38 inches (97 cm) |
| Swivel Angle | 160° |
| Tilt Angle | 0° to 25° |
| Leveling Adjustment | +/-5° |
| Material | Iron |
| Item Weight | 7.94 pounds |
| Color | Black |
| UPC | 818212005719 |
Warranty and Support
Lifetime Limited Warranty:
The Barkan TV Ceiling Mount comes with a Lifetime Limited Warranty. This warranty covers defects in materials and workmanship under normal use. Barkan products undergo strict quality tests to ensure durability and safety.
Customer Support:
For any questions, assistance, or if you are not satisfied with your product, please contact Barkan customer support:
- Email: sales.de@barkanmounts.com
- Website Support: Visit https://www.barkanmounts.com/support for FAQs, manuals, and further assistance.
Barkan customer service experts are available to help you with any inquiries.
