PDX Elite Viewtube Pro Instruction Manual

1. Product Overview

The PDX Elite Viewtube Pro is an advanced male masturbator designed for an immersive experience. It features innovative intermittent suction and a unique Super Suction Mode, providing varied sensations. The transparent viewtube allows for visual engagement during use. This device is rechargeable and crafted for ease of use and maintenance.

Image 1.1: The PDX Elite Viewtube Pro device, highlighting its transparent design and sleek black accents.

2. Important Safety Information

Please read all safety instructions carefully before using this product. Failure to do so may result in injury or damage to the product.

• This product is intended for adult use only.
• Clean the product thoroughly before and after each use with warm water and a mild, toy-safe soap. Rinse thoroughly.
• Do not submerge the electronic components of the device in water. Refer to cleaning instructions for details.
• Discontinue use immediately if you experience any discomfort, irritation, or pain. Consult a medical professional if symptoms persist.
• Keep out of reach of children and pets.
• Use only the charging cable provided with the device. Do not use damaged cables or chargers.
• Store the product in a cool, dry place away from direct sunlight and extreme temperatures.
• Do not attempt to disassemble or modify the product. This will void the warranty and may cause damage or injury.

3. Package Contents

Verify that all items listed below are present in your product packaging:

• 1 x PDX Elite Viewtube Pro Device
• 1 x USB Charging Cable
• 1 x User Manual (this document)

Image 3.1: The PDX Elite Viewtube Pro in its retail packaging, indicating included components.

4. Getting Started

4.1. Initial Charging

Before first use, fully charge your PDX Elite Viewtube Pro. A full charge typically takes approximately 2-3 hours.

1. Locate the charging port on the device, typically at the base or side.
2. Connect the small end of the provided USB charging cable to the device's charging port.
3. Connect the larger USB end of the cable to a compatible USB power source (e.g., computer USB port, USB wall adapter).
4. The indicator light on the device will illuminate or change color to indicate charging status. It will typically turn solid or off when fully charged.

Image 4.1: Detail of the control panel and charging port, showing where to connect the USB cable.

4.2. First Use Preparation

For hygiene and optimal performance, clean the device before its initial use as described in the Maintenance & Cleaning section.

5. Operating Instructions

5.1. Power On/Off

To power on the device, press and hold the power button (usually marked with a power symbol) for 2-3 seconds until the device activates and the indicator lights illuminate. To power off, press and hold the power button again until the device shuts down.

5.2. Mode Selection

The PDX Elite Viewtube Pro features multiple modes, including intermittent suction and a Super Suction Mode, along with various vibration patterns. Use the dedicated mode buttons (often marked with wave or fan symbols) to cycle through the available settings. The LED ring around the controls may change color or pattern to indicate the active mode.

Image 5.1: Detailed view of the control buttons for power, mode selection, and the illuminated LED ring.

5.3. Usage

Ensure the device is clean and fully charged. Apply a water-based lubricant to the opening of the device and to yourself for comfortable insertion. Gently insert and adjust as desired. Experiment with different modes and intensities to find your preferred experience. The transparent viewtube allows for observation during use.

6. Care and Maintenance

6.1. Cleaning

Proper cleaning is essential for hygiene and extending the life of your device.

1. After each use, power off the device.
2. Carefully separate any removable parts if applicable (e.g., inner sleeve).
3. Wash the interior and exterior of the device with warm water and a mild, toy-safe soap. Avoid harsh chemicals or abrasive cleaners.
4. Rinse thoroughly under running water, ensuring no soap residue remains.
5. Wipe the electronic components (top part with buttons) with a damp cloth only. Do not submerge this section in water.
6. Allow all parts to air dry completely before reassembling or storing.

6.2. Storage

Store the PDX Elite Viewtube Pro in a clean, dry, and cool place, away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent material degradation or reactions.

7. Troubleshooting

If you encounter any issues with your PDX Elite Viewtube Pro, refer to the table below for common problems and solutions.

8. Product Specifications

9. Warranty and Customer Support

For information regarding the product warranty, please refer to the official Pipedream Products website or the warranty card included with your purchase. Warranty terms and conditions may vary.

If you require further assistance, have questions about your PDX Elite Viewtube Pro, or need to report an issue, please contact Pipedream Products customer support directly. You can typically find contact information on their official website:

Visit Pipedream Store on Amazon

Please have your model number (RD545) and purchase details ready when contacting support.