1. Introduction
Welcome to the user manual for your Philips Lumea Advanced SC1994/00 IPL (Intense Pulsed Light) hair removal device. This device is designed to provide long-lasting hair reduction through gentle pulses of light that put hair follicles into a resting phase. Regular use helps to prevent hair regrowth, leaving your skin smooth.
Please read this manual carefully before using the device for the first time. It contains important safety information, operating instructions, and maintenance tips to ensure optimal results and safe use.
2. Important Safety Information
Before using the Philips Lumea Advanced, it is crucial to understand all safety precautions. Failure to follow these instructions could result in injury or damage to the device.
- Eye Safety: Never look directly into the light pulse. The device is equipped with an integrated safety system to prevent flashing when not in full contact with the skin. However, it is recommended to use the device in a well-lit room to reduce the perceived brightness of the flash.
- Skin Type Compatibility: The Philips Lumea Advanced is effective on a wide range of hair and skin types, but it is not suitable for very dark skin tones or very light (blonde, red, grey) hair. Always perform a skin patch test before full treatment.
- Contraindications: Do not use the device on irritated, sunburned, or recently tanned skin. Avoid use over tattoos, permanent makeup, moles, freckles, or varicose veins. Consult a doctor if you have any medical conditions, are pregnant, or breastfeeding.
- Children and Impaired Persons: Keep the device out of reach of children. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Electrical Safety: Only use the original power adapter provided with the device. Do not use the device near water or in damp environments.
3. Package Contents
Verify that all items are present in your package:
- Philips Lumea Advanced SC1994/00 IPL Device
- Body treatment window (integrated or attachable)
- Power adapter
- Storage pouch
- Cleaning cloth
- User Manual (this document)
Image: The Philips Lumea Advanced SC1994/00 product box, showing the device and its packaging.
4. Device Overview
Familiarize yourself with the different parts of your Philips Lumea Advanced device:
- Treatment window with integrated UV filter
- Integrated skin tone sensor
- Intensity level indicator lights
- Power button
- Flash button
- Air vents
- Power socket
Image: The Philips Lumea Advanced SC1994/00 IPL device, showing its ergonomic design and treatment window.
5. Setup
Follow these steps to prepare your device for use:
- Charge/Connect Power: Plug the power adapter into the device's power socket and then into a wall outlet. The device is designed for corded use.
- Clean Skin: Ensure the area you intend to treat is clean, dry, and free of any lotions, oils, or deodorants. Shave the area before treatment; do not wax or epilate, as the hair follicle needs to be present for IPL to be effective.
- Skin Tone Test: Before your first treatment, and whenever you treat a new body area, perform a skin patch test. Select a low intensity setting and flash a small area of skin. Wait 24 hours to check for any adverse reactions. If your skin shows no reaction, you can proceed with treatment, gradually increasing the intensity if comfortable.
6. Operating Instructions
Using your Philips Lumea Advanced for effective hair reduction:
6.1 Selecting the Right Intensity
The device has multiple intensity settings. Always start with a lower setting and increase it gradually until you find a level that is comfortable and effective for your skin tone and hair color. Refer to the skin tone chart in the full manual (if available) for guidance. The integrated skin tone sensor will prevent flashing if the skin tone is too dark for safe treatment.
6.2 Performing a Treatment
- Press the power button to turn on the device. The intensity indicator lights will illuminate.
- Select your desired intensity level using the power button (short presses cycle through levels).
- Place the device's treatment window firmly against your skin, ensuring full contact. The "ready to flash" indicator light will turn on.
- Press the flash button. You will see a flash of light.
- Move the device to the next adjacent area of skin, ensuring you do not treat the same spot twice in one session.
- Continue until the entire desired area has been treated.
6.3 Treatment Schedule
For optimal results, follow a consistent treatment schedule:
- Initial Phase (Weeks 1-4): Treat every two weeks. Hair reduction should become noticeable during this phase.
- Maintenance Phase (After Week 4): Treat every 4-8 weeks, or as needed, to maintain results. The frequency may vary depending on individual hair regrowth.
7. Maintenance and Cleaning
Proper maintenance ensures the longevity and hygiene of your device:
- Turn Off and Unplug: Always turn off the device and unplug it from the power outlet before cleaning.
- Clean Treatment Window: Use the provided cleaning cloth or a soft, dry, lint-free cloth to gently wipe the treatment window after each use. This removes any hair or skin residue.
- Clean Device Body: Wipe the main body of the device with a soft, damp cloth. Do not use abrasive cleaning agents or harsh chemicals.
- Storage: Store the device in its original pouch or a clean, dry place, away from direct sunlight and extreme temperatures.
8. Troubleshooting
If you encounter issues with your Philips Lumea Advanced, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not properly plugged in; power outlet issue. | Ensure the adapter is securely plugged into both the device and a working wall outlet. |
| Device does not flash. | Treatment window not in full contact with skin; skin tone too dark; device malfunction. | Ensure the treatment window is fully pressed against the skin. Check if your skin tone is compatible. If issues persist, contact customer support. |
| Skin irritation after treatment. | Intensity setting too high; sensitive skin reaction. | Reduce the intensity setting for subsequent treatments. Apply a soothing, unscented lotion. If irritation persists, discontinue use and consult a doctor. |
If the problem is not listed or persists after attempting the solutions, please contact Philips Customer Support.
9. Specifications
- Model Number: SC199400
- Dimensions (L x W x H): 10 x 5 x 1.27 cm (approximately 3.9 x 2 x 0.5 inches)
- Weight: 1 kilogram (approximately 2.2 lbs)
- Technology: IPL (Intense Pulsed Light)
- Power: Corded use
- Integrated Safety System: Yes
- Skin Tone Sensor: Yes
10. Warranty and Support
Philips offers a warranty for this product. Please refer to the warranty card included in your package or visit the official Philips website for detailed warranty terms and conditions specific to your region.
For product support, troubleshooting assistance, or to inquire about spare parts, please contact Philips Customer Service. Contact information can typically be found on the Philips website or in the documentation provided with your device.
Online Support: www.philips.com/support
