VOOPOO DRAG X2 POD Kit User Manual

Introduction

The VOOPOO DRAG X2 Mod Pod is an advanced vaping device designed for an exceptional Direct-to-Lung (DTL) experience. It features an adjustable airflow system and an ergonomic design for comfortable handling. Powered by the new GENE.TT chipset, it delivers up to 80W of power. The device utilizes a 5ml refillable pod compatible with VOOPOO's PnP X coils, ensuring a long-lasting and flavorful vape. Please note that an 18650 battery is required and not included with this kit.

Safety Information

• This product is intended for adult users only (18+).
• Keep out of reach of children and pets.
• Do not use if pregnant or breastfeeding, or if you have heart disease, high blood pressure, diabetes, or are taking medication for depression or asthma.
• Use only original VOOPOO accessories and coils.
• Do not expose the device to extreme temperatures, direct sunlight, or water.
• Always charge the device using a suitable charger and cable. Do not leave charging unattended.
• Dispose of the device and its components responsibly according to local regulations.
• This product does not contain tobacco or nicotine.

What's in the Box

Upon opening your VOOPOO DRAG X2 POD Kit, please verify that all components are present and undamaged:

• 1 x DRAG X2 POD Device
• 1 x PnP X Pod (5ml)
• 1 x PnP X 0.3 Ω Coil (Pre-installed)
• 1 x PnP X 0.15 Ω Coil
• 1 x Type-C Charging Cable
• 1 x User Manual
• 1 x PnP X Platform Card

Note: An 18650 battery is required for operation and is NOT included in the package. Please purchase a high-drain 18650 battery separately.

Image: Standard Packing List for the VOOPOO DRAG X2 Kit.

Product Overview

The DRAG X2 features a sleek design with a durable zinc alloy and leather construction. It includes a 0.96" TFT screen for clear display of vaping information and two adjustment buttons below the main fire button.

Image: VOOPOO DRAG X2 Device Overview.

Image: Detailed view of the DRAG X2's top airflow and screen interface.

Setup

1. Battery Installation

The DRAG X2 requires one external 18650 battery (not supplied). Ensure the battery is fully charged before installation.

1. Locate the battery compartment door, typically on the back or bottom of the device.
2. Open the battery door.
3. Insert the 18650 battery according to the polarity markings (+ and -) inside the compartment. Incorrect installation can damage the device.
4. Close the battery door securely.

Image: Battery compartment of the DRAG X2, illustrating battery insertion.

2. Coil Installation (PnP X Coils)

The DRAG X2 uses PnP X coils, known for their long lifespan and leak-proof design.

1. Remove the PnP X Pod from the device.
2. Flip the pod upside down.
3. Push the coil firmly into the designated slot at the bottom of the pod. Ensure it is seated correctly.
4. If replacing a coil, pull out the old coil before inserting the new one.

Image: PnP X Coils and their features, highlighting the atomizing technology.

3. E-liquid Filling

The PnP X Pod has a 5ml capacity and features a convenient side-filling system.

1. Remove the PnP X Pod from the device.
2. Locate the silicone plug on the side of the pod.
3. Gently lift the silicone plug to reveal the filling port.
4. Insert the nozzle of your e-liquid bottle into the filling port and slowly fill the pod. Avoid overfilling.
5. Securely close the silicone plug to prevent leaks.
6. After filling, wait at least 5-10 minutes for the e-liquid to fully saturate the coil before first use. This prevents dry hits and extends coil life.

4. Pod Attachment

Once the coil is installed and the pod is filled, attach it to the DRAG X2 device.

• Align the magnetic contacts on the bottom of the pod with the contacts on the device.
• The pod will snap into place securely due to the magnetic connection.

Operating Instructions

1. Power On/Off

• To turn the device On or Off, rapidly press the fire button 5 times within 2 seconds. The screen will display "DRAG X2" or "POWER OFF".

2. Vaping

• Once the device is powered on, press and hold the fire button while inhaling from the mouthpiece. Release the button when you finish inhaling.

3. Mode Selection and Wattage Adjustment

The DRAG X2 features the GENE.TT 2.0 chipset with multiple vaping modes:

• SMART Mode: Automatically detects the coil resistance and sets the optimal wattage, preventing accidental coil burnout. This is the recommended mode for beginners.
• RBA Mode: Allows manual wattage adjustment from 5W to 80W. This mode is suitable for experienced users who prefer precise control over their vaping experience.
• ECO Mode: Optimizes battery life by slightly reducing power output while maintaining a satisfying vape.

To switch between modes, press the fire button 3 times rapidly. Use the '+' and '-' adjustment buttons below the screen to change wattage in RBA mode.

Image: DRAG X2 displaying RBA Mode for custom power settings.

4. Screen Information

The 0.96" TFT screen displays important information:

• Battery Level Indicator
• Current Wattage Setting
• Coil Resistance (Ohms)
• Puff Counter
• Vaping Time (seconds)
• Selected Mode (SMART/RBA/ECO)

Maintenance

1. Cleaning

• Regularly clean the device, especially the area where the pod connects to the mod, to prevent e-liquid buildup. Use a dry, soft cloth.
• Clean the mouthpiece regularly with a damp cloth.

2. Coil Replacement

Coils are consumable parts and need to be replaced periodically, typically every 1-2 weeks depending on usage and e-liquid type. Signs of a worn-out coil include reduced flavor, less vapor production, or a burnt taste.

• Follow the "Coil Installation" steps in the Setup section to replace the coil.
• Always prime new coils by letting them soak in e-liquid for 5-10 minutes after filling the pod before first use.

3. Charging

The DRAG X2 supports Type-C charging. While it's possible to charge the 18650 battery inside the device, it is highly recommended to use an external battery charger for optimal battery life and safety.

• Connect the Type-C cable to the charging port on the device and the other end to a suitable USB power source.
• The screen will indicate charging status.
• Do not overcharge the battery. Disconnect once fully charged.

Troubleshooting

Specifications

Image: VOOPOO DRAG X2 Specifications Diagram.

Warranty and Support

For warranty information and technical support, please refer to the official VOOPOO website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, you may also contact the seller, Vaposeleccion, through the Amazon platform.