GRIFEMA GB1052-1

Download PDF
Contents

GRIFEMA GB1052-1 Wooden Monitor Riser Stand Instruction Manual

Model: GB1052-1 | Brand: GRIFEMA

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your GRIFEMA GB1052-1 Wooden Monitor Riser Stand. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of the product.

Safety Information

  • Ensure all components are securely fastened during assembly.
  • Do not exceed the maximum weight capacity of 20 kg (44 lbs).
  • Place the stand on a stable, level surface to prevent tipping.
  • Keep small parts away from children to avoid choking hazards.
  • Avoid exposure to excessive moisture or direct sunlight to prevent damage to the wood.

Package Contents

Before beginning assembly, verify that all parts are present and undamaged. Refer to the image below for a visual representation of the components.

GRIFEMA GB1052-1 Monitor Riser Stand components laid out

Image Description: An overhead view showing all components of the GRIFEMA GB1052-1 monitor riser stand laid out on a white surface. These include a large rectangular top panel, two smaller rectangular side panels, various screws, non-slip pads, and a cable management bracket.

  • Top Panel (1x)
  • Side Panels (2x)
  • Assembly Screws (various sizes)
  • Non-slip Pads (4x)
  • Cable Management Bracket (1x)
  • Instruction Manual (this document)

Setup and Assembly

Assembly of the GRIFEMA GB1052-1 monitor riser stand is straightforward and requires no additional tools beyond what is provided. Follow these steps:

  1. Identify Components: Lay out all components as shown in the "Package Contents" section.
  2. Attach Side Panels: Align one side panel with the pre-drilled holes on one end of the top panel. Insert the appropriate screws and tighten them securely. Repeat for the second side panel on the opposite end.
  3. Install Cable Management Bracket (Optional): If desired, attach the cable management bracket to the underside of the top panel using the smaller screws. This bracket helps organize cables.
  4. Apply Non-slip Pads: Peel the backing from the four non-slip pads and apply them to the bottom corners of the side panels. These pads provide stability and protect your desk surface.
  5. Final Check: Ensure all screws are tightened and the stand is stable before placing any equipment on it.
Assembled GRIFEMA GB1052-1 Monitor Riser Stand

Image Description: A front-angle view of the fully assembled GRIFEMA GB1052-1 monitor riser stand, showcasing its simple, rectangular design and the integrated cable management bracket underneath the top surface.

Operating and Usage

The GRIFEMA GB1052-1 monitor riser stand is designed to enhance your workspace ergonomics and organization.

Ergonomic Benefits:

  • Improved Posture: The stand elevates your monitor to an optimal eye-level height (104mm / 4.1 inches), which can help correct posture and reduce strain on your neck, shoulders, and back.
  • Reduced Fatigue: Maintaining a proper viewing angle can minimize eye strain and overall fatigue during extended use.
Diagram illustrating ergonomic benefits of a monitor riser

Image Description: A diagram showing two figures. The first figure demonstrates incorrect posture with a low monitor, leading to spinal load. The second figure shows correct posture with an elevated monitor, reducing spinal load and promoting a comfortable perspective.

Space-Saving and Organization:

  • Under-Stand Storage: The space beneath the stand (approximately 92mm / 3.6 inches height) provides convenient storage for keyboards, mice, notebooks, or other desk accessories, helping to keep your workspace tidy.
  • Cable Management: Utilize the integrated cable management bracket to route and organize cables, preventing clutter.
Monitor riser stand with keyboard and mouse stored underneath

Image Description: A close-up view of the GRIFEMA monitor riser stand on a desk, with a keyboard and mouse neatly stored underneath the elevated platform. A cable is shown being routed through the cable management bracket.

Versatile Applications:

This stand is suitable for various devices, including:

  • Monitors
  • Laptops
  • Printers
  • Scanners
  • Fax Machines

Maintenance

To ensure the longevity and appearance of your monitor riser stand, follow these simple maintenance guidelines:

  • Cleaning: Wipe the surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the wood finish.
  • Dusting: Regularly dust the stand to prevent buildup.
  • Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
  • Environment: Keep the stand in a dry environment and away from extreme temperature changes.

Troubleshooting

If you encounter any issues with your GRIFEMA GB1052-1 monitor riser stand, refer to the following common solutions:

  • Stand is Unstable:
    • Ensure all assembly screws are fully tightened.
    • Verify the stand is placed on a flat, level surface.
    • Check that the non-slip pads are properly affixed to the bottom of the side panels.
  • Damage to Surface:
    • Avoid placing sharp or heavy objects directly on the stand without protection.
    • Clean spills immediately to prevent staining.
  • Missing Parts:
    • Review the "Package Contents" section and contact GRIFEMA customer support if any parts are missing.

Specifications

Model NumberGB1052-1
BrandGRIFEMA
MaterialWood
ColorBlack
Product Dimensions (L x W x H)420 mm x 233 mm x 104 mm (16.54 x 9.17 x 4.09 inches)
Load CapacityUp to 20 kg (44 lbs)
Item Weight1.43 kg (3.15 pounds)
Assembly RequiredYes
Finish TypePolished
Detailed dimensions of the GRIFEMA GB1052-1 Monitor Riser Stand

Image Description: A technical drawing of the GRIFEMA GB1052-1 monitor riser stand with detailed measurements in millimeters, showing the length (420mm), width (233mm), height (104mm), and internal clearance (92mm). It also indicates a weight capacity of 20kg (44lbs).

Warranty Information

For detailed warranty information regarding your GRIFEMA GB1052-1 Monitor Riser Stand, please refer to the official GRIFEMA website or contact their customer service directly. Warranty terms and conditions may vary by region and purchase location.

Customer Support

If you require further assistance, have questions about assembly, or need to report a missing/damaged part, please visit the official GRIFEMA website for support resources, FAQs, and contact information.

Official Website: www.grifema.com (Note: This is a placeholder link, please verify the actual support URL.)

© 2023 GRIFEMA. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.