KICKER 46CSS674 Car Audio Component Speakers User Manual

Introduction

Thank you for choosing KICKER 46CSS674 6.75-inch Car Audio Component Speakers. This manual provides essential information for the proper installation, operation, and maintenance of your new audio system. These speakers are designed to deliver dynamic sound with Kicker's signature performance, featuring 600 watts max power handling and a 4-ohm impedance. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your product.

Safety Information

Always observe the following safety precautions to prevent injury or damage to the product:

• Disconnect the vehicle's battery before beginning any electrical installation.
• Ensure proper wiring polarity to avoid damage to speakers and amplifier.
• Do not operate the speakers at excessively high volumes for prolonged periods, as this may cause hearing damage.
• Securely mount all components to prevent them from becoming loose during vehicle operation.
• Consult a professional installer if you are unsure about any part of the installation process.
• Keep the product away from moisture and extreme temperatures.

What's in the Box

Verify that all components are present before beginning installation:

• (2) Woofers
• (2) Woofer Grilles
• (2) Tweeters (each with 36" Wire attached)
• (2) Crossovers (each with 35" Input wire/ 35" Tweeter output wire/ 35" Woofer output wire attached)
• (2) Flush Mount Tweeter Rings
• (2) Short Tweeter Mounting Nuts
• (2) Long Tweeter Mounting Nuts
• (2) Back Angled Tweeter Rings
• (2) Front Angled Tweeter Rings
• (2) Angled Surface Mount Tweeter Housings
• (12) 1" Screws
• (4) 5/8" Screws
• (8) Speed Clips
• (4) 7" Zip-ties
• Red Plastic Wire Caps
• Owner's Manual (this document)

Image: Overview of the KICKER 46CSS674 component speaker system, showing two woofers, two tweeters, and two crossovers, along with various mounting accessories.

Setup and Installation

Proper installation is crucial for optimal sound performance. It is recommended to have this system installed by a qualified professional.

1. Planning the Installation

• Determine the mounting locations for woofers, tweeters, and crossovers. The 6.75-inch woofers fit nearly every car made.
• Consider the three tweeter mounting options: flush, angled, and surface pods, to achieve the best sound staging.
• Ensure adequate space for the 12dB crossovers, which have a smaller footprint for easier installation.

Image: Close-up view of the KICKER tweeters, showcasing their compact design and different mounting options (flush and angled pods).

2. Wiring Connections

1. Connect the input wires from your amplifier or head unit to the "INPUT" terminals on the crossover.
2. Connect the woofer output wires from the crossover to the woofers.
3. Connect the tweeter output wires from the crossover to the tweeters.
4. Ensure all connections are secure and properly insulated using the provided wire caps or other suitable methods.

Image: Detailed view of one of the KICKER crossover networks, showing the input and output terminals for connecting to the amplifier, woofer, and tweeter.

3. Mounting Components

• Mount the woofers securely in their designated locations using the provided screws and speed clips.
• Install the tweeters using your preferred mounting option (flush, angled, or surface mount) and secure them with the appropriate nuts and rings.
• Mount the crossovers in a dry, secure location, away from direct heat or moisture.

Operating Instructions

Once installed, your KICKER 46CSS674 speakers are ready for operation. Follow these guidelines for optimal audio experience:

• Initial Power-Up: After installation, turn on your car's audio system at a low volume to verify all connections are correct and sound is produced from all speakers.
• Tweeter Adjustment: Utilize the three-position tweeter switch on the crossover for dialing in your highs. Experiment with different settings to find the sound profile that best suits your listening preferences and vehicle acoustics.
• Bass Response: The EVC (Extended Voice Coil) technology in the woofers helps deliver remarkable bass response. Ensure your amplifier settings are optimized for a full-range signal to take advantage of this feature.
• Sound Clarity: The titanium tweeter construction and neodymium magnets are designed to reveal subtle details in your audio. Phase plugs in the woofer cones eliminate any distortion, contributing to overall sound clarity.
• Volume Control: Gradually increase the volume to your desired listening level. Avoid prolonged listening at maximum volume to prevent speaker damage and hearing fatigue.

Maintenance

Regular maintenance ensures the longevity and performance of your speakers:

• Cleaning: Use a soft, dry cloth to wipe down the speaker grilles and surfaces. Do not use harsh chemicals or abrasive cleaners.
• Inspection: Periodically check all wiring connections for looseness or corrosion. Ensure all mounting screws are tight.
• Environmental Protection: While the UV-treated poly-foam surround assists with precise linear excursion and durability, avoid exposing the speakers to direct sunlight or extreme temperatures for extended periods when possible.
• Professional Check: If you notice any degradation in sound quality or unusual noises, consult a professional car audio technician.

Troubleshooting

If you experience issues with your KICKER 46CSS674 speakers, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact KICKER customer support or a certified car audio technician.

Specifications

Warranty Information

The KICKER 46CSS674 speakers come with a Limited Warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the official KICKER website or the warranty card included with your product. Keep your proof of purchase for warranty validation.

Support

For technical assistance, troubleshooting beyond this manual, or general inquiries, please contact KICKER customer support:

• KICKER Official Website: www.kicker.com
• Refer to the contact section on their website for phone numbers or email support.