Clorox 68832

CloroxPro Healthcare Bleach Germicidal Cleaner (Model 68832) Instruction Manual

Brand: CloroxPro | Model: 68832

Introduction

The CloroxPro Healthcare Bleach Germicidal Cleaner is a ready-to-use solution designed for effective cleaning and disinfection in healthcare and industrial environments. This product is formulated to kill a broad spectrum of microorganisms, including C. difficile and C. auris, on hard, nonporous surfaces.

CloroxPro Healthcare Bleach Germicidal Cleaner bottle

Image: Front view of the CloroxPro Healthcare Bleach Germicidal Cleaner bottle.

Safety Information

CAUTION: Causes eye irritation. Avoid contact with eyes and clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco, or using the toilet.

  • If in eyes: Hold eye open and rinse thoroughly with water for 15 to 20 minutes. Contact poison control or a doctor for further treatment advice. Have the product container or label available when calling.
  • DO NOT use this product with ammonia or acids such as vinegar, rust removers, or toilet cleaners.
  • Keep out of reach of children.

Ingredients

The active and other ingredients are as follows:

  • ACTIVE INGREDIENT: Sodium Hypochlorite 0.65%
  • OTHER INGREDIENTS: 99.35%
  • TOTAL: 100.00%

This product contains no phosphorus.

Image showing active and other ingredients of CloroxPro Healthcare Bleach Germicidal Cleaner

Image: Detailed breakdown of the product's active and other ingredients.

Setup and Preparation

This product is ready-to-use and does not require dilution. Ensure the area to be cleaned is well-ventilated. For heavily soiled areas, a pre-cleaning step is required before disinfection.

Preparing the Bottle:

  • Locate the pull-top cap on the bottle.
  • Pull the cap upwards to open the dispenser.
  • To close, push the cap back down firmly until it clicks into place.

Operating Instructions (Directions for Use)

Follow these instructions for cleaning, disinfecting, and deodorizing hard, nonporous surfaces:

  1. Pre-cleaning (for heavily soiled areas): Remove gross filth and heavy soil from the surface.
  2. Application: Spray the product 6-8 inches from the surface until the surface is thoroughly wet. Alternatively, apply with a clean cloth, mop, or sponge saturated with the cleaner until the surface is completely wet. When applying with a saturated cloth or sponge, gloves should be worn.
  3. Contact Time:
    • For general disinfection: Allow the surface to remain wet for 1 minute.
    • To kill C. difficile spores and C. auris: Allow the surface to remain wet for 3 minutes.
  4. Wiping: After the required contact time, wipe the surface with a clean, damp cloth.
  5. Food-Contact Surfaces: For food-contact surfaces, rinse with potable water after wiping.
  6. Streaking: If streaking is observed, wipe with a clean, damp cloth or paper towel.
Image showing a clock icon with '3 MINUTES' indicating contact time for disinfection

Image: Visual representation of the 3-minute contact time required for specific pathogens.

Image of a gloved hand spraying CloroxPro Healthcare Bleach Germicidal Cleaner onto a surface

Image: A gloved hand demonstrating the spray application of the cleaner on a surface.

Image showing various surfaces like stainless steel, plastics, chrome, glazed porcelain, glass, and vinyl, indicating product compatibility

Image: Illustration of various compatible surfaces for the cleaner, including stainless steel, plastics, chrome, glazed porcelain, glass, and vinyl.

Maintenance and Storage

Proper storage ensures product efficacy and safety.

  • Store this product in a cool, dry, well-ventilated area, away from direct sunlight and heat.
  • Keep the container tightly closed when not in use.
  • Do not reuse or refill this container.
  • Dispose of empty containers according to local regulations.

Troubleshooting and Usage Tips

This section addresses common questions and provides tips for optimal use.

  • Effective Against: This cleaner is bactericidal, virucidal, fungicidal, and sporicidal. It is effective against over 50 microorganisms, including MRSA and VRE, and specifically kills C. difficile and C. auris.
  • Dilution: The product is ready-to-use and provides a 1:10 dilution equivalent of sodium hypochlorite solution. No further dilution is required.
  • Surface Compatibility: Compatible with common healthcare surfaces such as plastics and stainless steel. Always test on an inconspicuous area first for new or sensitive surfaces.
  • Cross-Contamination: Aids in reducing cross-contamination between treated surfaces.
  • OSHA Compliance: Meets surface disinfection recommendations from OSHA Bloodborne Pathogens Standard.
Image highlighting that the product kills over 60 pathogens including C. diff, C. auris, VRE, and outbreak-causing viruses

Image: Overview of the product's efficacy against various pathogens.

Specifications

Item Model Number68832CT
BrandClorox
Item FormLiquid
ScentUnscented
Material FeatureDurable
Item Volume32 Fluid Ounces (946 mL)
ManufacturerClorox Professional Products Company
Date First AvailableMarch 23, 2017
ASINB06XSJP58X
Front label of CloroxPro Healthcare Bleach Germicidal Cleaner bottle showing product details

Image: Front label of the product bottle, displaying key information and certifications.

Back label of CloroxPro Healthcare Bleach Germicidal Cleaner bottle with detailed usage instructions and warnings

Image: Back label of the product bottle, providing comprehensive usage instructions and safety warnings.

Warranty and Support

Specific warranty information for this product is not provided in the available data. For product support, inquiries, or additional information, please contact Clorox Professional Products Company directly through their official channels.

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

© 2024 Clorox Professional Products Company. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.