Annadue Smart TV Remote Control User Manual

Introduction

This manual provides instructions for the Annadue Smart TV Remote Control, model Annadueg596n2gsmp. This remote is designed to offer voice and pointer functionalities for compatible Smart TVs, enhancing your viewing experience. Please read this manual thoroughly before use to ensure proper operation and to understand all features.

Package Contents

• 1 x Annadue Smart TV Voice Remote Control
• 1 x Instruction Manual

Key Features

• Voice Control: Interact with your TV using voice commands.
• Pointer Function: Navigate menus and select items with an on-screen pointer.
• Scroll Wheel: Easily scroll through content and confirm selections.
• Durable Construction: Made from ABS material for extended lifespan.

Setup

1. Battery Installation

The remote control requires two AA batteries (not included).

1. Locate the battery compartment on the back of the remote control.
2. Slide the battery cover downwards to open it.
3. Insert two AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Close the battery cover by sliding it back into place until it clicks securely.

Image: Open battery compartment for AA battery insertion.

2. Pairing Steps

To enable voice and pointer functions, the remote must be paired with your TV. If not paired, only basic button functions will work.

1. Ensure your TV is powered on.
2. Point the remote control towards your TV.
3. Press the Power button on the remote to turn on the TV (if not already on).
4. Press the Scroll Wheel (OK button) located in the center of the remote.
5. The remote control will automatically register with the TV. A pairing completion message should appear on your TV screen.

Operating Instructions

Using Voice Function

The voice function allows you to control your TV and search for content using spoken commands. This feature is only available if your TV supports voice control.

1. Press the Microphone button (often located near the center of the remote).
2. Speak clearly into the remote control's microphone.
3. Release the Microphone button when you are finished speaking.

Image: Remote control demonstrating voice command functionality.

Using Pointer and Scroll Functions

The pointer function allows you to move an on-screen cursor by moving the remote. The scroll wheel facilitates navigation and selection.

1. To activate the pointer, simply move the remote control. An on-screen cursor will appear.
2. Move your wrist to guide the pointer to your desired selection on the TV screen.
3. Use the Scroll Wheel to scroll through lists or web pages.
4. Press the Scroll Wheel (OK button) to confirm a selection.

Image: Demonstration of pointer and scroll functions.

General Button Functions

All standard buttons (e.g., Power, Volume, Channel, Home, Back, Number Pad) operate as they would on an original TV remote. Refer to your TV's user manual for specific button functionalities.

Image: User operating the remote control.

Compatibility

This remote control is compatible with various Smart TV models from 2019 to 2023 that support voice and pointer functions. It is specifically designed for:

• Voice Remote Models: AN-MR21GA, AN-MR21GC, AN-MR22GA, AN-MR22GC (2021, 2022, 2023 models)
• Older Voice Remote Models: AN-MR19BA, AN-MR20GA (2019, 2020 models)
• TV Series: OLED Z2, G2, C2, B2, A2, ZX, WX, GX, CX, BX Series
• TV Series: QNED99, 90, 85, 80 Series
• TV Series: NANO80, NANO99, NANO97, NANO91, NANO90, NANO85, NANO81 Series
• TV Series: UQ90, UQ80, UQ75, UQ70, UN85, UN73 Series

Important Note: The voice and pointer functions will only work with TVs that natively support these features. If your TV does not have voice functionality, these specific features of the remote will not be available.

Troubleshooting

Remote Not Responding

• Check Batteries: Ensure batteries are inserted correctly with the right polarity and are not depleted. Replace with fresh AA batteries if necessary.
• Line of Sight: Ensure there is a clear line of sight between the remote and the TV's infrared receiver. Obstructions can block the signal.
• Distance: The remote has a maximum range of approximately 10 meters (32.8 feet). Ensure you are within this range.

Voice or Pointer Function Not Working

• Pairing: Confirm the remote is properly paired with your TV. Follow the "Pairing Steps" in the Setup section. If pairing fails, try removing and re-inserting batteries, then repeat the pairing process.
• TV Compatibility: Verify that your TV model supports voice and pointer functions. These features will not work on TVs that do not natively support them.
• Microphone Button: Ensure you are pressing and holding the Microphone button while speaking for voice commands.

Specifications

Maintenance

• Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: Remove batteries if the remote will not be used for an extended period to prevent leakage.
• Avoid Drops: Protect the remote from drops and impacts to prevent damage.

Warranty and Support

This Annadue product comes with a 1 Year Warranty Against Manufacturer Defects. For warranty claims or technical support, please contact your retailer or the Annadue customer service channel where you purchased the product.

Annadue is committed to providing quality electronic products. For more information about Annadue products, please visit the official brand channels.