1. Introduction
Thank you for choosing the CrossBeats Spark Bluetooth In-Earbuds. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new wireless earphones. Please read it carefully to ensure optimal performance and longevity of your device.
Image 1.1: CrossBeats Spark In-Earbuds and Charging Case.
2. Package Contents
Ensure all items are present in your package:
- CrossBeats Spark In-Earbuds (Left and Right)
- Charging Case
- USB Type-C Charging Cable (not explicitly listed but standard)
- Ear Cushions (various sizes)
- Warranty Card
- User Manual (this document)
3. Product Overview
The CrossBeats Spark In-Earbuds feature a compact design with advanced audio technology. Each earbud is equipped with a 13mm dynamic driver for clear sound and quad microphones for enhanced call quality with Environmental Noise Cancellation (ENC).
Image 3.1: Key features of CrossBeats Spark In-Earbuds.
The charging case provides additional battery life and protects the earbuds when not in use. LED indicators on the case show charging status.
4. Setup
4.1. Charging the Earbuds and Case
- Place the earbuds into the charging case. Ensure they are correctly seated.
- Connect the USB Type-C charging cable to the charging port on the case and to a compatible USB power source.
- The LED indicators on the case will illuminate to show charging status. A full charge for the case and earbuds takes approximately 50 minutes.
- Once fully charged, disconnect the charging cable.
4.2. Pairing with a Device
The CrossBeats Spark earbuds utilize Hall Switch technology for quick connection.
- Initial Pairing: Open the charging case. The earbuds will automatically enter pairing mode, indicated by flashing LED lights on the earbuds.
- On your device (smartphone, tablet, laptop), enable Bluetooth.
- Search for available Bluetooth devices and select "CrossBeats Spark" from the list.
- Once connected, the earbud LEDs will stop flashing.
Image 4.2: Bluetooth 5.3 Insta Connect for quick pairing.
4.3. Wearing the Earbuds
For optimal sound quality and comfort, choose the correct size of ear cushions and insert the earbuds gently into your ear canal. Adjust them until they feel secure and comfortable.
5. Operating Instructions
The CrossBeats Spark earbuds feature intuitive touch controls.
5.1. Touch Controls
| Function | Action |
|---|---|
| Play/Pause | Single tap on either earbud |
| Next Track | Double tap on the right earbud |
| Previous Track | Double tap on the left earbud |
| Volume Up | Triple tap on the right earbud |
| Volume Down | Triple tap on the left earbud |
| Answer/End Call | Single tap on either earbud |
| Reject Call | Press and hold either earbud for 2 seconds |
| Activate Voice Assistant | Press and hold either earbud for 3 seconds |
| Toggle Gaming Mode | Quadruple tap on either earbud (refer to product for exact gesture) |
5.2. Call Management
The built-in quad microphones with ENC (Environmental Noise Cancellation) ensure clear communication during calls. Use the touch controls as described above to manage incoming and outgoing calls.
5.3. Gaming Mode
Activate the low latency gaming mode (40ms) for a synchronized audio-visual experience during gaming. Refer to the touch control table for activation.
Image 5.3: Low latency for gaming.
6. Maintenance
6.1. Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Remove ear cushions and clean them separately with mild soap and water if necessary, ensuring they are completely dry before reattaching.
- Do not use harsh chemicals or abrasive materials.
6.2. Water Resistance
The CrossBeats Spark earbuds are IPX5 rated, meaning they are resistant to splashes and sweat. They are not designed for submersion in water. Avoid exposing them to heavy rain or direct water jets.
Image 6.2: IPX5 water and dust resistance.
6.3. Storage
When not in use, store the earbuds in their charging case to protect them from dust, damage, and to keep them charged.
7. Troubleshooting
If you encounter issues with your CrossBeats Spark earbuds, try the following solutions:
- Earbuds not pairing:
- Ensure both earbuds are charged.
- Turn off Bluetooth on your device and turn it back on.
- Forget "CrossBeats Spark" from your device's Bluetooth list and attempt to pair again.
- Place earbuds back in the case, close the lid, wait a few seconds, then open to re-initiate pairing mode.
- No sound from one earbud:
- Ensure both earbuds are charged and connected.
- Try resetting the earbuds (refer to the product's specific reset procedure if available, usually involves holding touch sensors for a duration while in the case).
- Charging issues:
- Check the charging cable and power adapter for damage.
- Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
- Poor call quality:
- Ensure the microphones are not obstructed.
- Move closer to your connected device to avoid signal interference.
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | Spark |
| Connectivity Technology | Wireless (Bluetooth 5.3) |
| Audio Driver Type | 13mm Dynamic Driver |
| Noise Control | Passive Noise Cancellation, ENC (Environmental Noise Cancellation) for calls |
| Microphone Format | Built-In Quad Microphones |
| Low Latency | 40ms |
| Battery Life | Up to 42 hours (with charging case) |
| Charging Time | Approximately 50 minutes |
| Charging Interface | Type-C |
| Water Resistance Level | IPX5 (Water Resistant) |
| Control Type | Touch Control, Volume Control |
| Special Features | ENC, Fast Charging, Hall Switch Mode |
| Item Weight | 10 Grams |
| Product Dimensions | 5 x 2 x 2 cm |
9. Warranty and Support
Your CrossBeats Spark In-Earbuds come with a warranty. Please refer to the included Warranty Card for detailed terms and conditions, including the warranty period and coverage.
For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact CrossBeats customer service through their official website or the contact information provided on your warranty card.
