ESSAGER 15W Fast Charging Wireless Car Charger Phone Holder Mount (Model A5) User Manual

Introduction

Thank you for choosing the ESSAGER 15W Fast Charging Wireless Car Charger Phone Holder Mount. This device is designed to provide a secure mounting solution and efficient wireless charging for your smartphone while driving. Please read this manual carefully before use to ensure proper installation and operation.

Setup

Package Contents

ESSAGER Wireless Car Charger Mount
Suction Cup Bracket
Hook-Type Air Outlet Clip
USB-C Charging Cable
User Manual

Note: A QC 3.0 car charger is required for 15W/10W/7.5W fast charging and is NOT INCLUDED.

Assembly Instructions

Attach the Mount to the Holder: Unscrew the nut from your chosen mounting accessory (suction cup or air outlet clip). Thread the nut through the ball joint on the back of the charger mount. Push the ball head firmly into the socket on the mount until it clicks into place. Tighten the nut securely.
Install the Suction Cup Bracket (Dashboard/Windshield):
- Clean the desired flat surface on your dashboard or windshield thoroughly.
- Remove the protective film from the suction cup.
- Press the suction cup firmly onto the surface for 5 seconds.
- Pull up the lock lever on the suction cup base to create a vacuum seal.
Install the Air Outlet Clip:
- Locate a suitable air vent in your vehicle.
- Gently push the hook-type clip onto one of the air vent blades until it is secure.
- Ensure the clip is stable and does not obstruct airflow or vehicle controls.
Connect Power: Plug the provided USB-C charging cable into the port on the bottom of the charger mount and connect the other end to a compatible QC 3.0 car charger (not included).

Diagram showing three installation methods: dashboard, windshield, and air outlet. — Figure 1: The ESSAGER car charger mount offers versatile installation options for your dashboard, windshield, or air outlet.

Four-step diagram illustrating how to assemble the air vent clip to the charger mount. — Figure 2: Step-by-step guide for attaching the air outlet clip to the charger mount.

Four-step diagram illustrating how to install the suction cup mount on a flat surface. — Figure 3: Instructions for securing the suction cup mount to a dashboard or windshield.

Operating Instructions

Automatic Locking and Charging

When you place your Qi-enabled smartphone into the holder, the arms will automatically clamp to secure the phone and align it for wireless charging.
To release your phone, press the touch button on the side of the mount or the side mechanical button. The arms will open automatically. This function works even when the device is not connected to power, thanks to an internal battery.

Image showing the one-touch release and automatic locking mechanism of the car charger mount. — Figure 4: The automatic locking and one-touch release mechanism ensures secure phone placement and easy retrieval.

Adjusting the Viewing Angle

The mount features a 360° rotating ball joint and an extendable arm, allowing you to customize the angle of your phone.
Easily switch between portrait and landscape mode for navigation or charging.
Adjust the arm and ball joint to achieve optimal visibility and a safer driving experience.

Image demonstrating the flexible adjustment and stable hold of the car charger mount, including 360-degree rotation. — Figure 5: The mount offers flexible adjustments for optimal viewing angles, ensuring stability even on bumpy roads.

Dynamic Sound Pickup and Music Sync Lights

The built-in dynamic sound pickup system activates colorful lights that dance in sync with your music.
These soft, non-glaring lights enhance the visual experience, especially in dark environments, making driving at night more engaging.

Image illustrating the dynamic sound pickup system and music sync lights feature of the car charger mount. — Figure 6: The charger features dynamic lights that respond to sound, creating an engaging in-car atmosphere.

Charging Compatibility

The charger provides adaptive power output for various Qi-enabled smartphones:

15W Wireless Fast Charging: For LG V50/V40/V30/G8/G7.
10W Wireless Fast Charging: For Samsung Galaxy S24 Ultra/S23/S22/S21/Note 10+.
7.5W Wireless Fast Charging: For iPhone 15/14/13/12 Pro Max/11/XS Max/XS.
5W Standard Wireless Charging: For other Qi-enabled phones.

Note: For 15W/10W/7.5W fast charging, a QC 3.0 car charger (not included) is required.

Image showing a smartphone wirelessly charging in the ESSAGER car holder mount on a dashboard. — Figure 7: The ESSAGER mount functions as both a phone holder and a wireless charger, adapting to various phone models.

Safety Features

The charger incorporates multiple protection mechanisms for safe and durable use:

Overvoltage Protection
Overcurrent Protection
Overheating Protection
Under-voltage Protection
Short-circuit Protection
Anti-electromagnetic Protection

Image detailing the multiple charging protection features of the ESSAGER wireless car charger. — Figure 8: The charger is equipped with intelligent controls for multiple charging protections.

Video 1: Demonstrates the 15W auto-clamping wireless car charger mount in action, showing phone placement, automatic clamping, and removal.

Maintenance

Keep the charger mount clean by wiping it with a soft, dry cloth.
Avoid using harsh chemicals or abrasive cleaners.
Ensure the charging surface is free of dust and debris for optimal charging performance.
Periodically check the suction cup or air vent clip for secure attachment.

Troubleshooting

Issue	Possible Cause	Solution
Phone not charging or slow charging	Not using a QC 3.0 car charger. Phone not Qi-enabled. Phone case is too thick or contains metal. Misalignment of phone on charging coil. Foreign object detected.	Use a QC 3.0 compatible car charger. Ensure your phone supports Qi wireless charging. Remove phone case or use a thinner, non-metallic case. Adjust phone position to align with the charging coil. Remove any objects between the phone and charger.
Mount not holding securely	Suction cup not properly sealed or surface is dirty/uneven. Air vent clip not fully engaged.	Clean surface, re-apply suction cup, and ensure lock lever is engaged. Re-attach air vent clip firmly onto a sturdy vent blade.
Automatic arms not opening/closing	Low internal battery. Obstruction in the mechanism.	Connect the charger to power to recharge the internal battery. Check for any debris or obstructions in the clamping arms.
Lights not syncing with music	Sound pickup sensor obstructed or music volume too low.	Ensure the sound pickup sensor is clear and music volume is adequate.

Specifications

Brand: ESSAGER
Model Number: A5
Special Feature: Fast Charging
Color: Black
Input Voltage: 12 Volts
Output Current: 3 Amps
Output Voltage: 5 Volts
Wattage: 15 Watts (Max)
Total USB Ports: 1 (USB Type C)
Specification Met: Qi
Material: Metal, Plastic
Power Source: Battery Powered (internal for auto-clamping), External (USB-C for charging)

Warranty and Support

ESSAGER is committed to customer satisfaction. We provide a one-year after-sales service for every customer. If you encounter any problems while using the product, please feel free to contact ESSAGER customer service for assistance.

Free Replacement: Contact us for a free replacement in case of any malfunction within the warranty period.
Professional Technical Support: Our team is available to provide technical assistance.

For support, please visit the ESSAGER Store on Amazon or refer to the contact information provided with your purchase.

	ESSAGER 15W Wireless Charger User Manual - Fast, Safe, Compatible Charging Official user manual for the ESSAGER 15W Wireless Charger. Learn about product features, usage instructions, safety warnings, and compliance information for efficient and convenient wireless charging.
	Essager Power Bank User Manual - 20000mAh PD 65W Portable Charger Read the Essager Power Bank user manual for instructions on using your 20000mAh PD 65W portable charger for phones, tablets, and laptops. Learn about operation, maintenance, and safety.
	ESSAGER 3-in-1 Magnetic Wireless Charger User Manual Comprehensive user manual for the ESSAGER PES-047 3-in-1 magnetic wireless charger. Learn about its features, specifications, usage, safety guidelines, and troubleshooting for MagSafe-compatible iPhones, Apple Watch, and Qi earbuds.
	ESSAGER Wireless Charger User Manual - Features, Usage, and Safety Comprehensive user manual for the ESSAGER Wireless Charger, detailing product features, usage instructions, safety precautions, and after-sales service. Includes FCC and EU compliance information.
	ESSAGER 240W USB Type-C Cable User Manual \| Fast Charging, PD, E-Marker Chip Official user manual for the ESSAGER 240W USB Type-C to USB-C cable. Learn about its features, including PD fast charging, 5A current support, E-Marker chip, and compatibility with devices like Macbook, iPad, Samsung, and Huawei.
	ESSAGER USB Charger User Manual Comprehensive user manual for the ESSAGER USB Charger, detailing product overview, features, usage instructions, precautions, and after-sales service for safe and efficient device charging.

ESSAGER A5

ESSAGER 15W Fast Charging Wireless Car Charger Phone Holder Mount