ROIDMI EVE CC Self Emptying Robot Vacuum User Manual

Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your ROIDMI EVE CC Robot Vacuum and Mop Cleaner with Cleaning Base. Please read this manual thoroughly before using the product and retain it for future reference.

Important Safety Instructions

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

• Read all instructions before using the appliance.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Prevent unintentional starting. Ensure the switch is in the OFF-position before connecting to battery pack, picking up or carrying the appliance.
• Recharge only with the charger specified by the manufacturer.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.

Product Overview

The ROIDMI EVE CC is a versatile robot vacuum and mop cleaner designed for comprehensive floor cleaning. It features smart dust emptying, 2-in-1 vacuuming and mopping, and mobile app control for convenient operation.

Figure 1: ROIDMI EVE CC Robot Vacuum and Self-Emptying Base with Mobile App Interface. This image displays the robot vacuum, its self-emptying base, and a smartphone screen showing the control application, highlighting the integrated smart cleaning system.

Figure 2: Self-Emptying Feature. The robot automatically empties its dustbin into the 2.5L large dust collection bag located in the cleaning base, allowing for up to 60 days of hands-free operation.

Figure 3: Powerful Suction. The robot features 4000Pa strong suction power, effectively cleaning various types of debris including dust, hair, breadcrumbs, cat litter, and pet food.

Figure 4: LDS Laser Navigation. Equipped with LDS Laser Navigation Technology, the robot intelligently maps your home for efficient and thorough cleaning paths, even in dark environments.

Figure 5: App Control. The dedicated mobile application provides intelligent control over the robot, allowing users to manage suction power, water volume, cleaning schedules, and more.

Figure 6: Virtual Wall Protection. Set up virtual walls or restricted areas through the app to prevent the robot from entering specific zones or disturbing delicate items.

Figure 7: Advanced Navigation Features. The robot is equipped with wall perception for thorough edge cleaning, anti-fall detection to prevent drops from stairs, and a 17mm climbing height to easily navigate over obstacles.

Figure 8: 2-in-1 Vacuum and Mop. The ROIDMI EVE CC combines vacuuming and mopping functions with a 290ml water tank and a 260ml dust collector for comprehensive wet and dry cleaning.

Setup Guide

1. Unpacking

Carefully remove all components from the packaging. Ensure all parts listed in the packing list are present. Remove any protective films or packing materials from the robot and the cleaning base.

2. Charging Base Placement

Place the self-emptying cleaning base against a wall in an open area with good Wi-Fi signal. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the base for the robot to dock properly.

3. Initial Charge

Place the robot onto the charging base. Ensure the charging contacts on the robot align with those on the base. The robot will automatically begin charging. For first-time use, fully charge the robot before operation.

4. App Connection

1. Download the ROIDMI app from your mobile app store (iOS or Android).
2. Open the app and create an account or log in.
3. Follow the in-app instructions to add your ROIDMI EVE CC device. This typically involves connecting to the robot's temporary Wi-Fi hotspot and then connecting the robot to your home Wi-Fi network.
4. Once connected, you can access all smart control features, including mapping, scheduling, and cleaning mode selection.

Operating Instructions

1. Starting a Clean

• Via Robot Button: Press the power button on the robot once to start a full clean. Press again to pause. Hold to send the robot back to the base.
• Via ROIDMI App: Open the app, select your device, and tap "Start Cleaning". You can choose specific rooms, areas, or set up virtual walls before starting.

2. Vacuuming and Mopping

The ROIDMI EVE CC performs both vacuuming and mopping. Ensure the water tank is filled for mopping functions. The robot will automatically switch between modes or perform both simultaneously based on settings.

• Filling the Water Tank: Open the water tank cover, fill with clean water (do not use detergents or harsh chemicals), and close securely.
• Attaching the Mop Pad: Securely attach the mop pad to the designated slot on the robot.
• Adjusting Water Flow: Use the app to adjust the water flow level for mopping based on your floor type and cleaning needs.

3. Smart Features (via App)

• Map Management: View and edit your home's map, including room division, merging, and naming.
• Scheduled Cleaning: Set up daily or weekly cleaning schedules for automated cleaning.
• Restricted Areas/Virtual Walls: Define areas the robot should avoid, such as pet bowls or delicate furniture.
• Suction Power Adjustment: Customize suction power levels for different floor types (e.g., carpet, hard floor).
• Cleaning Records: Review past cleaning sessions, including cleaned area and duration.

Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your ROIDMI EVE CC. Always power off the robot before performing any maintenance.

1. Dust Bag Replacement (Self-Emptying Base)

The 2.5L dust bag in the cleaning base should be replaced approximately every 60 days, or when the app indicates it is full.

1. Open the top cover of the cleaning base.
2. Carefully pull out the full dust bag. The bag's opening will automatically seal to prevent dust leakage.
3. Insert a new dust bag into the slot, ensuring it is fully seated.
4. Close the top cover.

2. Robot Dustbin and Filter Cleaning

Even with self-emptying, it's recommended to periodically check and clean the robot's internal dustbin and filter.

• Open the robot's top cover and remove the dustbin.
• Empty the dustbin contents into a trash can.
• Remove the filter from the dustbin. Tap off excess dust. The filter is washable; rinse with water and allow to air dry completely before reinserting.
• Wipe the dustbin with a dry cloth. Reassemble the filter and dustbin.

3. Main Brush and Side Brush Cleaning

• Main Brush: Flip the robot over. Remove the main brush cover and lift out the brush. Use the cleaning tool (if provided) to cut and remove tangled hair or debris. Reinsert the brush and cover.
• Side Brush: Use a screwdriver to remove the screw holding the side brush. Remove any tangled hair or debris. Reattach the side brush.

4. Sensor Cleaning

Wipe all sensors (cliff sensors, wall sensor, charging contacts) on the robot and charging base with a clean, dry cloth. This prevents navigation issues.

5. Mop Pad Cleaning

After each mopping session, remove the mop pad and rinse it thoroughly with water. Allow it to air dry completely before reuse or storage.

Troubleshooting

Specifications

Warranty and Support

For warranty information and customer support, please refer to the official ROIDMI website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

• Online Support: Visit the official ROIDMI website for FAQs, troubleshooting guides, and product registration.
• Contact Customer Service: Refer to the contact information provided on the ROIDMI website or in your product packaging for direct assistance.