1. Safety Instructions
- Read all instructions carefully before use.
- Keep the diffuser on a flat, stable surface.
- Do not exceed the maximum water level.
- Use only clean tap water or distilled water.
- Only use 100% pure essential oils. Avoid corrosive substances.
- Do not block the mist outlet.
- Unplug the device before cleaning or refilling.
- Keep out of reach of children and pets.
- Do not immerse the device in water or any other liquid.
- Ensure the power adapter is rated for 5V/2A. Using an adapter with lower power may affect normal operation.
2. Package Contents
Verify that all items are present in the package:
- 1 x Dpofirs 3D Chimney Flame Aroma Diffuser (White)
- 1 x USB Power Cable
- 1 x User Manual
Image: The Dpofirs 3D Chimney Flame Aroma Diffuser shown with its included white USB charging cable. This illustrates the main unit and its power accessory.
3. Product Overview
Familiarize yourself with the components of your aroma diffuser:
- Mist Outlet: Where the mist and flame effect are released.
- Water Tank: Holds water and essential oils.
- Control Knob: Used to power on/off and adjust settings.
- USB Power Port: For connecting the power cable.
- Flame Effect Light: Creates the simulated flame.
Image: Front view of the Dpofirs 3D Chimney Flame Aroma Diffuser in white. This image shows the minimalist rectangular design with a flame-shaped cutout on the front.
Image: Top-down view of the Dpofirs 3D Chimney Flame Aroma Diffuser, highlighting the elongated mist outlet slot. This shows where the mist and flame effect emanate.
Image: Side view of the Dpofirs 3D Chimney Flame Aroma Diffuser, featuring the copper-colored control knob on the right side. This knob is used for operational adjustments.
4. Setup
Follow these steps to set up your aroma diffuser:
- Place the Diffuser: Position the diffuser on a flat, stable, and water-resistant surface.
- Open the Cover: Gently lift the top cover of the diffuser to access the water tank.
- Add Water: Fill the water tank with clean tap water or distilled water up to the maximum water level line (320ml capacity). Do not overfill.
- Add Essential Oils (Optional): Add 2-3 drops of your preferred 100% pure essential oil directly into the water tank. Adjust the quantity based on your preference.
- Close the Cover: Securely place the top cover back onto the diffuser.
- Connect Power: Insert the USB power cable into the diffuser's power port and connect the other end to a 5V/2A USB power adapter (not included).
Image: Bottom view of the Dpofirs 3D Chimney Flame Aroma Diffuser, displaying a caution label with instructions for adding water and power connection. This label provides important setup guidance.
5. Operating Instructions
Control your diffuser using the single control knob:
- Power On/Off: Rotate the control knob clockwise to turn on the diffuser. Rotate it counter-clockwise until it clicks to turn off.
- Adjust Mist Output: Once powered on, continue rotating the control knob clockwise to increase the mist output. Rotate counter-clockwise to decrease it.
- Flame Effect Modes: The diffuser features a simulated 3D flame effect. The brightness and color of the flame can be adjusted by rotating the control knob. Experiment with different rotations to find your preferred flame appearance.
- Automatic Shut-off: The diffuser is equipped with an automatic shut-off function. It will automatically turn off when the water level is too low to prevent damage.
6. Maintenance
Regular cleaning ensures optimal performance and longevity of your diffuser:
- Empty the Water Tank: Before cleaning, unplug the diffuser and empty any remaining water from the tank.
- Clean the Water Tank: Wipe the inside of the water tank with a soft, damp cloth. For stubborn residue, use a cotton swab dipped in white vinegar to gently clean the ultrasonic plate.
- Clean the Exterior: Wipe the exterior of the diffuser with a soft, dry cloth.
- Drying: Allow all parts to air dry completely before reassembling or storing.
- Storage: If not in use for an extended period, clean the diffuser thoroughly and store it in a cool, dry place.
Note: Do not use harsh detergents, abrasive cleaners, or solvents, as these may damage the diffuser.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No mist or weak mist | Low water level Mist outlet blocked Ultrasonic plate dirty Insufficient power adapter | Add water to the tank Clear any obstructions from the mist outlet Clean the ultrasonic plate Ensure a 5V/2A power adapter is used |
| No flame effect | Diffuser not powered on Flame effect light malfunction | Ensure the diffuser is powered on and the knob is rotated Contact customer support if the issue persists |
| Water leakage | Overfilled water tank Cover not properly sealed Diffuser placed on an uneven surface | Do not exceed the MAX water line Ensure the top cover is securely closed Place the diffuser on a flat, stable surface |
| Unusual noise | Low water level Foreign object in water tank | Add water Empty and clean the water tank |
8. Specifications
- Brand: Dpofirs
- Model Number: Dpofirsd8mhg9nwrx-12
- Color: White
- Material: Plastic
- Water Tank Capacity: 320 Milliliters
- Power Input: 5V/2A (USB)
- Features: Automatic Shut-off, Silent Operation, 3D Flame Effect, Large Spray
- Package Dimensions: 29 x 11 x 9 cm
- Country of Origin: China
9. Warranty and Support
This Dpofirs product is designed for reliability and performance. For any questions, technical support, or warranty claims, please refer to your purchase documentation or contact the seller directly through the platform where the product was purchased.
Please retain your proof of purchase for warranty purposes.