1. Introduction
Welcome to the Shooters Global SG Timer GO user manual. This document provides essential information for the proper setup, operation, and maintenance of your SG Timer GO shot timer. Please read this manual thoroughly before using the device to ensure optimal performance and safety.
2. Safety Information
Always prioritize safety when handling firearms and using the SG Timer GO. Adhere to all local and range safety rules.
- Always follow the four fundamental rules of firearm safety.
- Wear appropriate eye and ear protection during live-fire training.
- Ensure the device is securely attached to your belt or gear to prevent loss or damage.
- Do not expose the device to extreme temperatures or moisture.
- Use only the provided USB-C cable for charging.
3. Package Contents
Verify that all items are present in your SG Timer GO package:
- SG Timer GO Device
- Belt Quick Release Attachment
- USB-C Charging Cable
- User Manual (this document)
4. Device Overview
The SG Timer GO is a compact and feature-rich shot timer designed for various shooting disciplines. It features a clear display, intuitive controls, and advanced sound detection.
Figure 4.1: Front view of the SG Timer GO, displaying shot count and elapsed time. The device has two yellow buttons and a clear LCD screen.
Figure 4.2: Side view of the SG Timer GO, illustrating key features such as the advanced sound sensor, loud buzzer, and indicating up to 3000 sessions on a single charge. The quick release belt attachment is also visible.
5. Setup
5.1 Charging the Device
Before first use, fully charge your SG Timer GO.
- Connect the supplied USB-C cable to the charging port on the SG Timer GO.
- Plug the other end of the USB-C cable into a standard USB power adapter (not included) or a computer USB port.
- The device display will indicate charging status. A full charge typically takes a few hours.
5.2 Attaching the Belt Quick Release
The SG Timer GO comes with a belt quick release for convenient attachment and removal.
- Slide the quick release attachment onto your belt until it is secure.
- Align the SG Timer GO with the quick release base.
- Press the timer firmly onto the base until it clicks into place.
- To remove, pull the lever on the quick release base and lift the timer.
Figure 5.1: The SG Timer GO shown with its quick release belt attachment, demonstrating how the device can be easily secured and detached from a belt.
6. Operating Instructions
6.1 Powering On/Off
- To power on: Press and hold the main button (larger yellow button) for approximately 2 seconds.
- To power off: Navigate to the 'Power Off' option in the menu or press and hold the main button until the device shuts down.
6.2 Basic Operation Modes
The SG Timer GO offers several pre-programmed modes for different training scenarios:
- Live Fire: Optimized for detecting live firearm shots.
- Dry Fire: Enhanced sensitivity for detecting dry fire clicks.
- .22: Specific settings for .22 caliber firearms.
- Airsoft: Calibrated for airsoft gun sounds.
Use the smaller yellow button to cycle through modes and menu options. The main button typically confirms selections or starts/stops the timer.
6.3 Adjusting Settings (On-Device)
While many advanced settings are managed via the mobile app, basic adjustments like buzzer volume or display brightness can be made directly on the device. Refer to the on-screen menu for available options.
Figure 6.1: A user holding the SG Timer GO, demonstrating its ergonomic design and the clear readability of the display during use. The screen shows current shooting mode and settings.
7. Mobile App Integration: Drills
The SG Timer GO integrates seamlessly with the "Drills" mobile application, unlocking advanced features and performance analysis tools.
7.1 Pairing with Bluetooth
- Download the "Drills" app from your device's app store.
- Ensure Bluetooth is enabled on your smartphone.
- Power on your SG Timer GO.
- Open the "Drills" app and follow the on-screen instructions to pair your device.
7.2 App Features Overview
The "Drills" app provides a comprehensive training platform:
- Video Recording with Shot Timer Overlay: Capture training videos with real-time shot data displayed.
- Remote Control: Control your SG Timer GO settings and start/stop functions from your phone.
- Performance Analysis: Analyze your shooting performance on a larger screen with detailed statistics.
- Custom Drills & Stages: Create and share custom training stages in 3D and AR.
- Progress Tracking: Monitor your improvement over time with an interactive training calendar.
Figure 7.1: Screenshots from the "Drills" mobile application, showcasing features like building stages in 3D/AR, filming training with shot data overlays, and tracking progress through an activity log.
7.3 Advanced Sensor Settings
The "Drills" app allows fine-tuning of the SG Timer GO's smart sensor:
- Sensitivity Adjustment: Optimize detection for various calibers (CO2, .22lr, suppressed, 9mm, rifle, shotgun) and dry fire.
- Echo Suppression: Filter out echoes and other shooters' sounds in crowded environments to isolate your shots.
8. Maintenance
Proper maintenance ensures the longevity and reliability of your SG Timer GO.
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Storage: Store the timer in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the device frequently. Charge it regularly, even if not in use for extended periods.
9. Troubleshooting
If you encounter issues with your SG Timer GO, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on | Low battery; Device malfunction | Charge the device fully. If issue persists, contact support. |
| Shots not detected | Incorrect sensitivity setting; Excessive ambient noise; Device too far from firearm | Adjust sensitivity via the "Drills" app. Ensure echo suppression is active if in a noisy environment. Position the timer closer to the firearm. |
| Bluetooth not connecting | Bluetooth off on phone; Device not in pairing mode; App issue | Ensure phone Bluetooth is on. Restart both the timer and the phone. Reinstall the "Drills" app if necessary. |
| Inaccurate timing | Sensor interference; Incorrect mode selected | Verify the correct operation mode is selected (e.g., Live Fire vs. Dry Fire). Check for physical obstructions near the sensor. |
10. Specifications
Key technical specifications for the SG Timer GO:
- Brand: Shooters Global
- Model: SG Timer GO with Belt Quick Release
- Dimensions: 1.7"D x 2.3"W x 2.75"H
- Item Weight: 3.2 ounces (0.2 Pounds)
- Material: Plastic
- Color: Black
- Screen Size: 3 Inches
- Battery: 1 Lithium Polymer battery (included)
- Battery Life: Up to 5000 sessions on a single charge
- Charging: USB-C
- Connectivity: Bluetooth
- UPC: 792649432051
11. Warranty and Support
The SG Timer GO comes with a 2-year warranty, ensuring coverage against manufacturing defects. Shooters Global also provides lifetime support and regular firmware updates to introduce new features and improvements.
For technical assistance, warranty claims, or general inquiries, please visit the official Shooters Global website or contact their customer support team.
