CONTIA Replacement Mop Pads for Hobot 168/188 Window Cleaning Robot

1. Introduction

This instruction manual provides essential information for the proper use and maintenance of your CONTIA Replacement Mop Pads. These pads are designed to ensure optimal cleaning performance for compatible Hobot window cleaning robots. Regular replacement and maintenance of these pads contribute to the efficiency and longevity of your cleaning device.

2. Compatibility

These CONTIA Replacement Mop Pads are specifically designed for use with the following Hobot window cleaning robot models:

• Hobot 168 Window Cleaner Robot
• Hobot 188 Window Cleaner Robot

Ensure your robot model matches one of the listed compatible devices for proper fit and function.

3. Installation and Replacement

Follow these steps to correctly install or replace the mop pads on your Hobot window cleaning robot:

1. Power Off: Before handling the robot, ensure it is powered off and disconnected from any power source.
2. Remove Old Pads: Gently peel off the used mop pads from the robot's cleaning wheels. The pads are typically attached with a hook-and-loop fastener or an elastic band.
3. Prepare New Pads: Take a new CONTIA replacement mop pad. If desired, lightly dampen the pad with water or a suitable window cleaning solution before attachment.
4. Attach New Pads: Align the new mop pad with the cleaning wheel. The elastic edge of the pad should fit snugly around the wheel, ensuring full coverage and secure attachment. Press firmly to ensure it is properly seated.
5. Verify Attachment: Confirm that both mop pads are securely attached to their respective cleaning wheels and are not loose.

Image: A CONTIA mop pad attached to a Hobot window cleaning robot, with another detached pad nearby. This illustrates the correct placement of the mop pad on the robot's cleaning wheel.

Image: A detailed view of a single CONTIA replacement mop pad, emphasizing the elastic band designed for secure attachment to the cleaning robot.

4. Maintenance and Care

To maintain the effectiveness and extend the lifespan of your CONTIA Replacement Mop Pads, follow these care instructions:

• Regular Cleaning: After each use, remove the mop pads from the robot.
• Washing: Hand wash the pads with mild detergent and warm water, or machine wash on a gentle cycle. Avoid using bleach or harsh chemicals.
• Drying: Air dry the pads completely before reattaching them to the robot or storing them. Do not tumble dry at high heat, as this may damage the material.
• Replacement: Replace mop pads regularly, especially if they show signs of wear, tear, or reduced cleaning performance. Frequent replacement helps maintain optimal cleaning results.

Image: This image displays a set of eight CONTIA replacement mop pads, showcasing their textured surface and circular shape, ready for use or cleaning.

5. Specifications

6. Warranty and Support

For any questions regarding your CONTIA Replacement Mop Pads, including warranty information or technical support, please contact the manufacturer or your point of purchase. Keep your purchase receipt for warranty claims.

Manufacturer: WJJ-11-18