Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Good Housekeeping Roman 83007 Bathroom Ventilation Exhaust Fan with Light and Night-Light. This unit is designed to effectively remove excess humidity and odors from your bathroom, contributing to a more comfortable and healthier environment. Please read all instructions carefully before beginning installation or operation.
Image: Good Housekeeping Roman 83007 Bathroom Ventilation Exhaust Fan in Matte Black. This image displays the complete fan unit with its decorative matte black finish and frosted glass light cover.
Safety Information
To reduce the risk of fire, electric shock, or injury to persons, observe the following:
- Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction codes and standards.
- Always disconnect power at the service panel before wiring or servicing the unit.
- This unit is ETL Listed for safe use over shower enclosures and bathtubs when connected to a Ground Fault Circuit Interrupter (GFCI) protected circuit.
- Do not use this fan with any solid-state speed control device.
- Never place a switch where it can be reached from a tub or shower.
- Duct work must always be vented to the outdoors.
Package Contents
Verify that all components are present before beginning installation:
- Motor with Housing (All-Metal)
- Light Kit with Glass Shade
- Installation Hardware (including adjustable slider bars)
Specifications
| Feature | Specification |
|---|---|
| Model Name | Roman |
| Model Number | 83007 |
| Color | Matte Black |
| Air Flow Capacity | 110 CFM (Cubic Feet Per Minute) |
| Noise Level | 3.0 Sones |
| Voltage | 120 Volts |
| Power Source | Hardwired (AC) |
| Product Dimensions | 17"D x 17"W x 8"H |
| Item Weight | 16.62 Pounds |
| Control Method | Touch (via wall switch, not included) |
| Bulb Requirements | 2x LED A-15 bulbs (8 watts max each), 1x Candelabra base bulb (7 watts max) - Bulbs not included |
| Certifications | ETL, HVI |
Image: Graphic illustrating key specifications including 110 CFM airflow, 3.0 Sones noise level, and that lightbulbs are not included.
Installation
This fan is designed for flush mount installation. Ensure you have adequate space and access for wiring and ducting.
Tools and Materials Required (Not Included):
- Screwdriver
- Wire strippers
- Drill
- Duct tape or clamps
- Appropriate wiring (e.g., 12/2 gauge)
- Light bulbs (2x LED A-15, 8W max; 1x Candelabra base, 7W max)
Installation Steps:
- Prepare the Opening: Create an appropriate opening in the ceiling for the fan housing. The housing dimensions are approximately 9.7" x 8.9" x 7.4" (W x D x H).
- Mount the Housing: Use the included adjustable slider bars to secure the fan housing between ceiling joists. The slider bars can extend the housing range from 13.78" to 22.83".
- Connect Ducting: Attach a 4-inch round duct to the fan's exhaust port. Secure it with duct tape or clamps to ensure an airtight seal. Ensure the duct vents to the outdoors.
- Electrical Wiring: Disconnect power at the circuit breaker. Route electrical wires (e.g., 12/2 gauge) to the fan's junction box. Connect the wires according to local electrical codes. The junction box is designed with ample space for wiring. It may be easier to wire the fan in the attic before fully securing it in the ceiling.
- Install Light Kit: Once the housing is secured and wired, attach the light kit and glass shade.
- Insert Light Bulbs: Install the required light bulbs. Note that the fixture requires 2 LED A-15 bulbs (maximum 8 watts each) and 1 Candelabra base bulb (maximum 7 watts). Ensure bulbs are short enough to fit within the light plate.
- Restore Power: Once installation is complete, restore power at the circuit breaker and test the fan and light functions.
Image: Detailed diagram showing the dimensions of the fan housing (9.7" x 8.9" x 7.4") and the 15" diameter of the decorative cover, along with the 4" duct connection.
Operation
The Good Housekeeping Roman 83007 fan operates via standard wall switches (not included). It features a main light and a night-light function.
- Fan Operation: Activate the fan by flipping the designated wall switch. The fan will operate at 110 CFM to remove moisture and odors.
- Main Light Operation: Activate the main light using its dedicated wall switch. This light provides general illumination for your bathroom.
- Night-Light Operation: The night-light function is typically controlled by a separate switch or integrated into the main light switch with multiple toggles. Consult your electrician for specific wiring configurations if you desire separate control for the night-light.
Maintenance
Regular maintenance ensures optimal performance and longevity of your fan.
Cleaning the Fan and Light Cover:
- Disconnect Power: Always turn off power to the fan at the circuit breaker before cleaning.
- Remove Cover: Carefully remove the decorative light cover and glass shade.
- Clean Components: Wipe the exterior of the fan and the light cover with a soft, damp cloth. A mild, non-abrasive cleaner can be used if necessary. Ensure all parts are dry before reassembly.
- Clean Fan Blades: Gently clean any dust or debris from the fan blades and motor housing using a soft brush or vacuum cleaner attachment. Avoid direct contact with electrical components.
- Reassemble: Carefully reattach the glass shade and decorative cover.
- Restore Power: Restore power at the circuit breaker.
Troubleshooting
If you encounter issues with your fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on | No power, loose wiring, faulty switch | Check circuit breaker. Verify wiring connections. Test wall switch. |
| Light does not turn on | Burned out bulb, loose wiring, faulty switch | Replace light bulbs. Check wiring connections. Test wall switch. |
| Light is too dim | Incorrect bulb wattage or type, opaque glass shade | Ensure you are using the recommended bulb types and wattages (2x LED A-15, 8W max; 1x Candelabra base, 7W max). The frosted glass shade diffuses light, which may appear dimmer than clear glass. |
| Fan is noisy | Loose mounting, debris in fan blades, motor issue | Ensure fan housing is securely mounted. Clean fan blades. If noise persists, contact customer support. |
| Night-light not working or cannot be found | Wiring configuration, bulb issue | Verify wiring for the night-light function. Ensure the Candelabra base bulb is installed and functional. Consult an electrician if unsure about wiring. |
Warranty and Support
The Good Housekeeping Roman 83007 Bathroom Ventilation Exhaust Fan is backed by a 2-Year Warranty on Other Parts and a Lifetime Motor Warranty. For warranty claims or technical support, please refer to the contact information provided with your purchase documentation or visit the official Good Housekeeping website.
Image: The Good Housekeeping Seal, indicating quality testing and warranty backing.