1. Safety Instructions
Please read all instructions carefully before assembly and operation to ensure safe and efficient use of your VEVOR Stainless Steel Utility Sink.
- Always wear protective gloves during installation to prevent injury from sharp edges.
- Ensure the sink is placed on a stable, level surface. Adjust the leveling feet as necessary.
- Do not use corrosive fluids or strong acid/alkali liquids for cleaning, as this may damage the stainless steel surface.
- Verify all connections, especially water and drain lines, are secure and leak-free before use.
- Keep children away from the sink during assembly and operation.
2. Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged.
- 1 x Workbench with Sink
- 1 x Kitchen Faucet
- 1 x Drain Hose Set
- 1 x User Manual
Image: All components included in the package, laid out for inspection.
3. Setup and Assembly
Follow these steps to assemble your utility sink. It is recommended to have two people for certain assembly stages.
3.1. Unpacking
Carefully remove all parts from the packaging. Inspect for any shipping damage. Keep all packaging materials until assembly is complete.
3.2. Assembling the Frame
Attach the legs to the workbench frame. Ensure all bolts are securely tightened. The lower shelf can be installed at this stage or after the sink is in place.
Image: Exploded view illustrating the assembly sequence of the sink frame and its various parts.
3.3. Installing the Sink and Workbench
Place the stainless steel sink and workbench top onto the assembled frame. Secure it using the provided fasteners. Ensure the sink bowl is correctly oriented (left single bowl for this model).
Image: The complete utility sink assembly, showcasing the integrated faucet and workbench area.
3.4. Faucet Installation
Install the included 304 stainless steel faucet into the designated hole on the sink. Connect the hot and cold water lines to the faucet. Note: Inlet hoses for the faucet need to be purchased separately.
Image: A close-up of the faucet in use, demonstrating its 360° rotation and hot/cold water control.
3.5. Drain Assembly
Assemble the multi-layer sealed drain and install it into the sink bowl. Connect the thickened PP drain pipe. Ensure the removable filter basket is in place to prevent clogs.
Image: The sink drain featuring a filter basket designed to capture food debris and prevent clogs.
3.6. Adjusting Legs
Adjust the adjustable table legs to ensure the sink is stable and level on uneven surfaces. Rotate the feet clockwise or counter-clockwise until stability is achieved.
Image: Detail of an adjustable leg, highlighting its mechanism for leveling the sink on various floor types.
4. Operating Instructions
4.1. Water Usage
The 304 stainless steel faucet provides both hot and cold water. Rotate the faucet 360° to direct water flow as needed. The ceramic valve core allows for precise control of water temperature and flow.
4.2. Workbench Functionality
The integrated workbench offers ample space for food preparation, cutting, and temporary storage. The design includes a knife storage area for convenience and safety, and an open storage space at the bottom for cleaning tools or other accessories.
Image: An overhead perspective of the sink, illustrating the spacious workbench area and integrated knife holders.
5. Maintenance
5.1. Cleaning the Sink
Regular cleaning is essential to maintain the appearance and longevity of your stainless steel sink. Wipe with a dry cloth after each use to prevent water spots and mineral buildup. For general cleaning, use mild soap and water. Avoid abrasive cleaners or steel wool, which can scratch the surface.
Image: A hand cleaning the stainless steel surface of the sink, demonstrating proper care.
5.2. Preventing Clogs
Regularly empty and clean the removable filter basket in the drain to prevent food and debris from accumulating and causing clogs. The thickened PP drain pipe is designed for efficient drainage, but proper maintenance of the filter basket is key.
6. Troubleshooting
This section addresses common issues you might encounter with your utility sink.
| Issue | Possible Cause | Solution |
|---|---|---|
| Faucet leaking | Loose connections, faulty ceramic valve core | Check and tighten all faucet connections. If leaking persists, the ceramic valve core may need inspection or replacement. |
| Slow drainage | Clogged filter basket, obstruction in drain pipe | Remove and clean the filter basket. Inspect the drain pipe for any blockages and clear them. |
| Sink is unstable/wobbly | Uneven surface, improperly adjusted legs | Adjust the leveling feet on each leg until the sink is stable. Ensure all frame connections are tight. |
| Rust spots on stainless steel | Exposure to corrosive substances, improper cleaning, hard water deposits | Clean immediately with a non-abrasive stainless steel cleaner. Avoid prolonged contact with acidic foods or harsh chemicals. Wipe dry after use. |
7. Specifications
Detailed specifications for the VEVOR Stainless Steel Utility Sink, Model S2-1.
| Feature | Detail |
|---|---|
| Brand | VEVOR |
| Model Number | S2-1 |
| Material | Stainless Steel (Sink), Ceramic (Faucet Valve Core), Polypropylene (Drain Hose) |
| Overall Size | 39.4 x 19.1 x 37.4 inches (1000 x 485 x 950 mm) |
| Sink Dimensions | 16.9"D x 13"W x 8.7"H (430 x 330 x 220 mm) |
| Item Weight | 24.4 lbs (11.05 kg) |
| Installation Type | Freestanding |
| Finish Type | Brushed |
| Drain Type | Pop-Up with Filter Basket |
| UPC | 197988005247 |
8. Warranty and Support
For warranty information or technical support regarding your VEVOR Stainless Steel Utility Sink, please contact VEVOR customer service. Refer to the contact information provided with your purchase documentation or visit the official VEVOR website for assistance.
