1. Introduction
Thank you for choosing the HOLDLAMP 70W RGBW 4-in-1 LED Stage Par Light. This device is designed to provide rich and dynamic lighting effects for various events and venues. It features a unique outer ring with 9 different light modes and 7 high-brightness RGBW light beads, which can operate independently or simultaneously. This manual provides essential information for safe and effective use, including setup, operation, maintenance, and troubleshooting.
Image: HOLDLAMP 70W RGBW 4-in-1 LED Stage Par Light with its bracket, showcasing its design.
2. Safety Information
- Read all instructions carefully before operating the device.
- Keep this manual for future reference.
- Ensure the power supply voltage matches the device's requirements (110V AC).
- Do not expose the device to rain or moisture to prevent fire or electric shock.
- Always disconnect from the main power supply before cleaning or servicing.
- Ensure proper ventilation; do not block the fan or vents.
- Avoid direct eye exposure to the light source.
- This device is for indoor use unless specified otherwise.
3. Package Contents
Verify that all items are present in the package:
- LED Stage Par Light Unit(s)
- Remote Control
- Power Cable
- Instruction Manual
- Mounting Bracket (pre-attached)
4. Product Overview
Familiarize yourself with the components and controls of your LED Stage Par Light.
4.1 Light Features
Image: HOLDLAMP 70W RGBW 4-in-1 LED Stage Par Light with illuminated outer ring and central LED beads, displaying various light circle effects.
- Outer Ring: Features 9 distinct light modes for decorative effects.
- Central LED Beads: 7 high-brightness RGBW (Red, Green, Blue, White) light beads for primary illumination.
- Combined Effects: Both the outer ring and central beads can operate simultaneously or independently.
4.2 Rear Panel and Connections
Image: Rear panel of the HOLDLAMP LED Stage Par Light, showing the LCD display, Power In/Out, DMX In/Out, MIC, and cooling fan.
- LCD Display: Shows current mode, DMX address, and other settings.
- Menu Buttons: Used for navigating and selecting options on the LCD display (MENU, UP, DOWN, ENTER).
- MIC: Built-in microphone for sound-activated modes.
- Power In: Connects to the main power supply.
- Power Out: Allows daisy-chaining power to other units.
- DMX In: Connects to a DMX controller or the DMX Out of another light.
- DMX Out: Connects to the DMX In of the next light in a DMX chain.
- Fan: Internal cooling fan for heat dissipation.
4.3 Remote Control
Image: Infrared remote control for the LED Stage Par Light, detailing buttons for power, mode selection, brightness adjustment, color mixing, and reset.
The included remote control provides convenient access to various functions:
- On/Off: Power the light on or off.
- Strobe: Activates strobe effect.
- Auto Mode 1/2: Selects automatic program modes.
- Voice Control 1/2: Activates sound-activated modes.
- Up/Down: Increases/decreases brightness or navigates menu.
- Red/Green/Blue/White: Direct color selection.
- Color Mixing 5-12: Pre-set mixed colors.
- Rst (Reset): Resets the light to default settings.
5. Setup
5.1 Mounting
The double-handle design allows for versatile placement:
- Floor Mount: Place the light stably on a flat surface using its adjustable bracket.
- Truss/Shelf Mount: The bracket can be used to hang the light from a truss or secure it to a shelf. Ensure all mounting hardware is securely fastened.
Image: Dimensions of the HOLDLAMP LED Stage Par Light (22cm width, 24cm height, 8cm depth) and images showing different mounting positions.
5.2 Power Connection
Connect the provided power cable to the 'Power In' port on the rear panel of the light and then to a suitable 110V AC power outlet. If connecting multiple lights, you can use the 'Power Out' port to daisy-chain power to subsequent units.
5.3 DMX Connection (Optional)
For DMX control, connect a DMX cable from your DMX controller's output to the 'DMX In' port of the first light. To control multiple lights, connect a DMX cable from the 'DMX Out' of the first light to the 'DMX In' of the second light, and so on, forming a daisy chain.
Image: Multiple HOLDLAMP LED Stage Par Lights connected via DMX, demonstrating synchronized lighting effects.
6. Operating Instructions
The LED Stage Par Light offers multiple control options:
Image: Diagram illustrating the multiple control modes of the LED Stage Par Light.
6.1 Power On/Off
Connect the power cable to turn the unit on. Disconnect to power off, or use the 'On/Off' button on the remote control.
6.2 Control Modes
The light supports the following modes, selectable via the remote control or the onboard LCD menu:
- Color Mixing: Manually adjust RGBW levels to create custom colors.
- Strobe: Produces a flashing light effect.
- Auto: Runs through pre-programmed lighting sequences.
- Sound Activated: Lights react to ambient sound and music beats via the built-in microphone.
- Master-Slave: Connect multiple units, where one acts as the master and others follow its programming.
- Jump: Colors change abruptly.
- Fade: Colors transition smoothly.
- DMX (6 or 10CH): Professional control using a DMX512 controller.
Image: Examples of light effects from the LED Stage Par Light, showing the outer light strip active, the central light beads active, and both active simultaneously.
6.3 Using the Onboard Menu
Use the 'MENU', 'UP', 'DOWN', and 'ENTER' buttons on the rear panel to navigate and select settings on the LCD display. This allows for detailed configuration of modes, DMX addresses, and other parameters.
6.4 DMX Operation
When using DMX control, each light requires a unique DMX address. Refer to the DMX channel chart (usually provided in a separate DMX guide or within the light's menu) to understand how each channel controls specific functions (e.g., color, dimmer, strobe, mode selection). Set the DMX address for each light using the onboard menu.
7. Maintenance
7.1 Cleaning
To maintain optimal performance and light output, regularly clean the lens and housing. Use a soft, lint-free cloth. For stubborn dirt, a mild glass cleaner can be applied to the cloth (not directly to the light). Ensure the device is unplugged before cleaning.
7.2 Fan and Ventilation
The built-in fan is crucial for heat dissipation and extending the product's lifespan. Ensure the fan and ventilation openings are free from dust and obstructions. Do not operate the light in enclosed spaces without adequate airflow.
8. Troubleshooting
If you encounter issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not power on. | No power supply; faulty cable. | Check power connection; try a different outlet or cable. |
| Remote control not working. | Battery depleted; obstruction; remote out of range. | Replace remote battery; ensure clear line of sight to IR receiver; operate within range. |
| No DMX control. | Incorrect DMX address; faulty DMX cable; DMX controller issue. | Verify DMX address settings; check DMX cable connections; test with another DMX controller if possible. |
| Sound activated mode not responding. | Microphone obstructed; low sound level; incorrect mode selected. | Ensure microphone is clear; increase sound volume; confirm sound-activated mode is active. |
9. Specifications
Technical details for the HOLDLAMP 70W RGBW 4-in-1 LED Stage Par Light:
Image: Table detailing the specifications of the HOLDLAMP LED Stage Par Light.
- Model Number: ZQ01523X10US
- Color: Multicolor
- Shape: Round
- Material: Acrylonitrile Butadiene Styrene (ABS)
- Finish Type: Painted
- Light Source Type: LED
- Power Source: Corded Electric
- Voltage: 110 Volts (AC)
- Maximum Compatible Light Source Wattage: 70 Watts
- Mounting Type: Floor Mount
- Light Source Special Features: Color changing, Sound activated, DMX compatible, Remote control
- Number of Light Sources: 10 (referring to the pack size, individual unit has 7 central beads + outer ring)
- Wattage: 70 watts
- Control Mode: DMX512, Voice control, Self-walking, Master-slave
- DMX Channels: 6 or 10CH
10. Warranty and Support
10.1 Warranty Information
This product comes with a 1-year manufacturer's warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
10.2 Customer Support
For technical assistance, warranty claims, or any questions regarding your HOLDLAMP LED Stage Par Light, please contact the manufacturer or your retailer. Please have your model number (ZQ01523X10US) and purchase information ready when contacting support.